Search results

They are considered as one of the most important hydrogen storage materials [1,2].
According to the alloying components designed, MgNi alloy were mixed by powders of Mg and Ni of 1:1,Then adding the Ti into it by content of 0.1, 0.2, 0.3 .
Fig. 1 showed the XRD patterns of the MgNi alloys which were ball milled 15h.
References [1] A.
Schultz: Alloys and Compounds, Vol. 458(2008), p. 479-486

Ariza 1,a and L.A.
The samples were polarised from -600 mV up to 2000 mV at a scan rate of 2 mV.s-1.
Fig. 1, shows a representative SEM micrograph of the interface.
References [1] O.
Monteiro: Key Engineering Materials Vol. 230-232 (2002), p. 479

Through the finite element calculation, part of the stress results are shown in Table 1.
Table 1 STRESS OF SUPPORT CRACKS AREA Eccentric Load[kN] Principal tensile stress [MPa] Principal compressive stress [MPa] Principal shear stress[MPa] 0 125 — 98 — 150 — 113 — 5 125 49 250 65 150 72 269 91 10 125 73 275 87 150 92 293 99 15 125 104 317 92 150 127 380 116 20 125 137 366 113 150 166 460 129 25 125 178 479 124 150 202 577 143 In order to observe the stress variation of the support cracks area more directly, plotted a graph of the finite element analysis results.
Structural measures: (1) Install one to three short ribs between the two transverse reinforced ribs at the two sides of the web.
References [1] Harold S.Reemsnyder , David A.Demo.
Processing and Analysis on Steel Structure Accident[J].Beijing: China Building Materials Press,2003,3,1

The effect of matrix pearlite percentage on the tensile strength and elongation is shown in Fig. 1.
Table 1.
Impact value [J] Individual Impact value [J] Tensile strength [MPa] Yield strength [MPa] El. [%] Main frame EN-GJS-350-22U-LT 601 Table 3.
References [1] World in Transition: Towards Sustainable Energy Systems, German Advisory Council on Global Change, (2003)
Forum Vol. 475-479 (2005), p. 2769-2772 [9] I.

Principle of the SLM process is shown in Fig. 1.
Fig. 5: Schematic drawing of the testing matrix Table 1: Testing parameters for final specimens Specimen no.
References [1] C.
[2] L Zheng, Y Liu, S Sun and H Zhang, Selective laser melting of Al–8.5 Fe–1.3 V–1.7 Si alloy: Investigation on the resultant microstructure and hardness, Ch.
In Proceedings of Solid Freeform Fabrication Symposium 2013, (pp. 474-479) [6] B.

These bacteria infect humans through water, food, and livestock [1].
After the test, 1 mL of the media was taken and diluted in 9 mL of sterile 0.85% NaCl, with serial dilutions ranging from 10-1 to 10-7.
Fig. 1.
References [1] Zhou, Z., Li, B., Liu, X., Li, Z., Zhu, S., Liang, Y., Cui, Z., & Wu, S. (2021).
Journal of the Ceramic Society of Japan, 124(4), 475–479 [7] Listiani, D., Sapar, A., & Aritonang, A.

CFRPs outperform conventional metals in durability, high strength-to-weight ratio, stiffness and density [1-3].
Fig. 1 Experimental setup The dynamometer was mounted on to the cross-slide of the lathe.
Details of the drilling parameters used in this study are listed in Table 1.
References [1] Casas-Rodriguez JP, Ashcroft IA, Silberschmidt VV.
International Journal of Machine Tools and Manufacture, 2012. 59:1-5 [15] Langenecker B.

Table 1 Three-point bending strength of HCP alumina and that of PC alumina with HIP.
References [1] F.
Soc., Vol. 72 [1] (1989) 3-15
Powder and Powder Metal., Vol. 40 [1] (1993) 12-15 [in Japanese]
Powder and Powder Metal., 45, 473-479 (1998) [in Japanese]

For such structures, periodic inspections and maintenance are mandatory to ensure safety [1].
The structure is a dog-bone specimen with the dimension of 142×20×3mm as shown in Fig. 1(b).
The geometry of the structure is shown in Fig. 1(d).
References [1] J.
Transactions of the ASME, Vol.126, No.3, 2004, pp. 479-488 [16] Pan Bing, Xie Huimin, Dai Fulong.

Fig.1 shows the SEM images of the microstructure of YW2 cemented carbide before and after the treatment.
While in Fig.1(d), they can’t.
References [1] S.Harish, A.Bensely, D.Mohan Lal, et al.
Materials Science and Engineering A 2008, 479:229-235
[18] Liu Shourong, Zhou Jinting, Cemented Carbide, 1997,14(1):22-27.