Search results

XRD data were received using a Rigaku D/MAX-3B diffractometer with Cu Ka target radiated at 45 kV and 150 mA.
Substituting the value of A in Eq. (8) and using the flow stress data at various strains for the same flow curves, ln(σ-A) vs. lnε is plotted.
Some typical experimental and predicted data are shown in Fig. 3a in which also contains the data for the quasi-static testing.
Comparisons between the experimental and the predicted data at various deformation conditions shown in Fig. 3, it can be found that a small deviation between the experimental data and the predicted data can be received in most of the deformation conditions.
From the data shown in Fig. 2a for the two specimens, it can be seen obviously that the correlation between the experimental data and the predicted data for the former is better than that the latter.

Application of Basic Grey Model Data Fitting of Complete Load-Settlement Curves of Pile Tests.
In this work, loading tests data of totally over one hundred piles were collected.
Table 1 Data summary of pile loading tests No.
The errors of the data of last load step between the data from two approaches were 39%, 57% and 4%, which indicates that the prediction precisions are largely discrete and unacceptable.
Thus, the prediction results repeated the characteristics of the given data.

For a dataset of 24 articles, only three articles use personal data, while the other 20 articles use public data as a dataset as well as one article using public data and private data, public data used such as: Mammography, DDSM, MIAS, WBCD, InBreast, DMR-IR, MRI, ULS.
This feature is then used as training data and a model for breast cancer classification.
The data source contains medical information and image data collected from patients who have given consent for use in research.
The classification method is a method for building models that can predict the class or label of new data based on the characteristics of the training data.
The classification method has the main objective of grouping or classifying data into classes or labels based on the characteristics of the data.

· Usage Monitoring (UM) and Operational Loads Measurement (OLM): - development and ongoing validation and refinement of systems and processes - data processing, routine reporting and management · Flight and ground loads calibration and test, including procedure development, control and data acquisition systems, test management and data analysis
The lesson learnt here was that it is critical to the outcome of a project to have trustworthy data.
Valuable lessons were learnt about the appropriate data to collect to support subsequent studies, and the best way to structure data entry for reliable collection.
Critical locations were identified based on fleet condition data, stress analysis and engineering judgment.
The Crash Data Recorder can be utilized to extract flight regimes by applying manoeuvre recognition software.

Its Web-based feature enables all the data used are stored in the server, so that the use can access his/her data all over the world through the Internet and an USB or mobile storage device are not necessary.
The data cannot be assessed if there is not an Internet connection.
In data collection stage, the user can input the amount of material, processes and relative data available in the huge databases built in the package, which are collected from a large number of sources, including ecoinvent v.2, US LCI, ELCD, US Input Output, EU and Danish Input Output, Swiss Input Output, LCA Food, Industry data v.2.
The results provide detail data chart and inventories similar to those in SimaPro.
Solidworks only has charts and simply data as shown in Fig.3.

Based on Faraday's Laws of Electrolysis, the reduction in wheel radius (wheel wear) is a function of the electrical charge.
The control scheme was based on optimal dressing data.
Reduction of grinding forces by applying ELID.
Reduction in grinding forces reported. [57] Sintered SiC, Zerodur, CVD-SiC Subsurface effects investigated.
The reduction in grinding forces is favourable because sub-surface damage is reduced and surface integrity is enhanced.

CCA was used to determine the extent to which one set of data was relate to another and the particular attributes responsible for the relationship.
Methodology - Monitoring data Macau is located on the southeast coast of China to the west of Pearl River Delta.
It is used as a data reduction method.
It suggested seven principle components can be used for explaining 80% of variation of the whole data sets of 28 water variables.
Conclusions Water quality data for the MSR Macau was evaluated for variations and the relationship between physical and chemical parameters.

Taguchi method was used to analyze the experimental data.
(a) (b) Experimental Results and Discussion Experimental Data Analysis - 5-cycle voltage-drop testing data at room temperature, and 1000-cycle temperature and life-test voltage-drop testing data were analyzed by using S/N ratio analysis to obtain the optimized parameters.
Data were recorded every 5 cycles.
Data were recorded every 5 cycles.
Data was taken after switch had run for 1000 cycles.

Significant reduction in mobile learning device.
DAL layer ( Latabase Access Layer) Data access, Web service, etc.
The virtual resource pool layer The resources of data, service, computing, etc.
DAL layer ( Latabase Access Layer) Data access, Web service, etc.
If the analysis found that the business need to access the data access layer, business logic layer will then call related data access layer services, the business passed to the data access layer and processing.

Test data are shown in Fig. 4.
Objectives are to obtain the material fatigue limit data and the data on scale-and-surface induced effect of real railway axles.
Test data are given in Table 1.
The data are used to verify the probabilistic S-� curves derived from the material test data by the above mentioned grouped specimen tests and up-and-down tests.
Test data can be seen in Fig. 8b.