Search results

According to the data presented in contemporary investigations, children’s inflammatory periodontal diseases often develop on the background of somatic pathology, including the gastrointestinal tract.
Statistical data processing of research was performed using licensed programmer STATISTICA 6.1 the average arithmetic mean (M), the magnitude error of the mean (m), the significance by Student’s test (t), the degree of reliability of differences (p).
Simultaneous reduction of SOD activity can be explained by the phenomenon of cross-regulation of enzymes activity.

The grain refinement of equiaxed a phase is assumed to affect, among other things, the increase in creep resistance and reduction in crackability as a result of stress corrosion.
By referring the obtained results to the literature data [14÷17], Ti-8Al-1Mo-1V-0.2C alloy after duplex annealing is characterized by strength properties comparable or slightly higher than those of the alloy containing no carbon in as-strengthened state.
[3] Information on http://asm.matweb.com [4] Fatigue Data Book: Light Structural Alloys, ASM International, USA 1995, pp. 238-245

Cr(Ⅵ) can easily penetrate the cell wall and exert its noxious influence in the cell itself, being also a source of various cancer diseases[2].The most common method applied for chromate control is reduction of Cr(Ⅵ) to its trivalent form in acid and subsequent hydroxide precipitation of Cr(Ⅲ).
The literature data show that the sorption capacity, specificity and adsorption kinetics are mainly influenced by chemical structure and composition of the starch-based material, and also by the accessibility of chelating or complexing groups.
As already known, comparisons of different sorbents are difficult because of inconsistencies in the data presentation.

The mean of three tensile specimens were taken to give a meaningful data point.
The mean of five specimens were taken to give a meaningful data point Results and Discussion Initial microstructure.
After the first ECAP pass, extensive cracking leads to reduction of the length of the Al4(Ce,La) particles to about 1 µm (Fig. 2 (a)).

In this paper, the data of calcium and magnesium determination on the sewage sludge in Maoming is for Ca 2656.0 ~ 2850.6 mg / kg and Mg 4173.5 ~ 4398.9mg/kg, is significantly lower than the results of Xie Shao-zhen at el.
The data from Bian You-sheng[4]show that Ca is 0.14(wt /%), Mg is 0.12 (wt /%)in Rice straw; Ca is 0.14(wt /%), Mg is 0.02(wt /%) in wheat; Ca 0.84, Mg0.0 7(wt /%) in soybean; Ca 0.42, Mg 0.05(wt /%) in rape. so add a different crop straw to the sludge may be caused a significant impact on calcium and magnesium content of the compost .In this experiment ,the rape straw is added in sewage sludge from 8% to 40%，the exchangeable calcium and magnesium are increased 4.38% ~ 10.58% and 6.77% ~ 13.78% at the end of composting , compared with The beginning of composting.
The exchangeable Ca increased in 19.51% ~ 104.83% , but a decreased trend for exchangeable magnesium, 6.05% of a reduction ,Compared with the sludge single compost.

The analysis of obtained data showed that there were places on the surface of hematite under 5000 MPa pressure (fig. 1) with insufficient compactness of its particles in the total volume of the sample: there were multiple hollow spaces (fig. 1, a); particles of material had irregular shapes with strong aggregation and uneven edges (fig. 1, b).
The analysis of the obtained data showed that in the result of pressure duplication to 10000 MPa (fig. 2) there was the tendency to more compact distribution of hematite particles in the total volume of the sample: there were multiple hollow spaces, but with smaller geometric sizes (fig. 2, a); particles of material still had irregular shapes with strong aggregation and uneven edges but there were some particles of smaller fraction (fig 2., b) that meant the process of the partial destruction of its particles.
The analysis of the surface researches of the hematite under 15000 MPa pressure (fig. 3) showed that there were well pressed zones where hematite particles were densely distributed in total volume of the sample, but there were still some insignificantly dense spaces, but with the reduction of their geometrical sizes (fig. 3, a) comparing with samples under 10000 MPa pressure; there was a tendency of partial destruction of hematite particles, its aggregation decreased and the edges became smoother (fig. 3, b).

EPMA analysis and thickness of trivalent chromium coatings with difference main salt Fig. 3 and Table 1 showed the potentiodynamic polarization curves and data for the coatings deposited at various concentrations of main salt, respectively.
The hardness value of as-deposited and 400°C -heated trivalent chromium coatings Fig. 7 and Table 2 showed the SEM images and wear test data of as-deposited and as-annealed coatings.
Chuang: Huo Role of nickel undercoat and reduction-flame heating on the mechanical properties of Cr–C deposit electroplated from a trivalent chromium based bath, Surface & Coatings Technology, Vol. 203(2009), p. 2921-2926

Data reduction.
By averaging three sets of data, we can determine the K value to be 0.11 and the n value to be 0.62, indicating the pseudo-plastic behavior for film foam flow in a vertical tube.

This phenomenon can be unfavorable to health, safety, and the environment; it can also affect rubber performance such as weakening of adhesive properties and reduction of tackiness [9].
There is also scarce data on NR vulcanizates employing surfactants in their formulation [13].
The correlation between blooming and tensile properties of NR vulcanizates at 50 °C is then investigated from the gathered data.

The smart microchip will be mainly composed of three parts; IC chip for individual identification, micro pressure sensor for physiological function measurement and data transmitting and receiving device.
The resist charged into the through hole was apparently confirmed; this could indicate the suppression and reduction of attached grinding chips and residual grinding chips.
In this measuring system, an output signal from the sensor was recorded and stored in an exclusive data-logger.