Papers by Author: R.T. Leonard

Abstract: In this work, aggregate epitaxial carrot distributions are observed at the crystal, wafer and dislocation defect levels, instead of individual extended carrot defect level. From combining large volumes of data, carrots are observed when both threading screw dislocations (TSD) and basal plane dislocations (BPD) densities are locally high as seen in full wafer maps. Dislocation density distributions in areas of carrot formation are shown, and suggest TSD limit the formation of carrots in regions containing BPD. These data also add support for mechanisms requiring the need for both dissociated BPD and TSD for carrot formation.

Abstract: The growth of large diameter silicon carbide (SiC) crystals produced by the physical vapor transport (PVT) method is outlined. Methods to increase the crystal diameters, and to turn these large diameter crystals into substrates that are ready for the epitaxial growth of SiC or other non homogeneous epitaxial layers are discussed. We review the present status of 150 mm and 200 mm substrate quality at Cree, Inc. in terms of crystallinity, dislocation density as well as the final substrate surface quality.

Abstract: The presence of threading mixed dislocations (TMDs) (with both edge and screw component) in 4H-SiC crystals grown by PVT method has been reported both from axial slices (wafers cut parallel to the growth axis) and commercial offcut wafers (cut almost perpendicular to the growth axis). In this paper, a systematic method is developed and demonstrated to unambiguously determine the Burgers vectors of TMDs in 4H-SiC commercial offcut wafers using both Synchrotron Monochromatic X-ray Topography (SMBXT) and Ray Tracing Simulations. The principle of this method is that the contrast of dislocations on different reflections varies with the relative orientation of Burgers vectors with respect to the diffraction vectors. Measurements confirm that in commercial offcut wafers the majority of the threading dislocations with screw component are mixed type dislocations.

Abstract: Definitive correlations are presented between specific types of dislocations identified via Synchrotron White Beam X-Ray Topography (SWBXRT) and identified via selective etching of 4H-SiC substrates. A variety of etch conditions and the results on different faces of SiC substrates and epiwafers are examined. Hillocks formed on the carbon face of the substrate after KOH etching correlate very well to TSDs identified via SWBXRT. Topography of substrates and of vertical crystal slices reveals a large proportion of Threading Mixed character Dislocations (TMDs) in the population of Threading Screw Dislocations.

Abstract: Availability of high-quality, large diameter SiC wafers in quantity has bolstered the commercial application of and interest in both SiC- and nitride-based device technologies. Successful development of SiC devices requires low defect densities, which have been achieved only through significant advances in substrate and epitaxial layer quality. Cree has established viable materials technologies to attain these qualities on production wafers and further developments are imminent. Zero micropipe (ZMP) 100 mm 4HN-SiC substrates are commercially available and 1c dislocations densities were reduced to values as low as 175 cm-2. On these low defect substrates we have achieved repeatable production of thick epitaxial layers with defect densities of less than 1 cm-2 and as low as 0.2 cm-2. These accomplishments rely on precise monitoring of both material and manufacturing induced defects. Selective etch techniques and an optical surface analyzer is used to inspect these defects on our wafers. Results were verified by optical microscopy and x-ray topography.

Abstract: Recent advances in PVT c-axis growth process have shown a path for eliminating micropipes in 4HN-SiC, leading to the demonstration of zero micropipe density 100 mm 4HN-SiC wafers. Combined techniques of KOH etching and cross-polarizer inspections were used to confirm the absence of micropipes. Crystal growth studies for 3-inch material with similar processes have demonstrated a 1c screw dislocation median density of 175 cm-2, compared to typical densities of 2x103 to 4x103 cm-2 in current production wafers. These values were obtained through optical scanning analyzer methods and verified by x-ray topography.

Abstract: The development of SiC bulk and epitaxial materials is reviewed with an emphasis on epitaxial growth using high-throughput, multi-wafer, vapor phase epitaxial (VPE) warm-wall planetary reactors. It will be shown how the recent emergence of low-cost high-quality 100-mm diameter epitaxial SiC wafers is enabling the economical production of advanced wide-bandgap Power–Switching devices.

Abstract: Experimental results are presented for SiC epitaxial layer growth employing a large-area, up to 8x100-mm, warm-wall planetary SiC-VPE reactor. This high-throughput reactor has been optimized for the growth of uniform 0.01 to 80-micron thick, specular, device-quality SiC epitaxial layers with low background doping concentrations of <1x1014 cm-3 and intentional p- and n-type doping from ~1x1015 cm-3 to >1x1019 cm-3. Intrawafer layer thickness and n-type doping uniformity (σ/mean) of ~2% and ~8% have been achieved to date in the 8x100-mm configuration. The total range of the average intrawafer thickness and doping within a run are approximately ±1% and ±6% respectively.