Thermal Study on the Grinding Special-Shaped Surface of Granite Material

Yan Bin Shi; Bo Huang; De Bao Liu

doi:10.4028/www.scientific.net/AMM.164.42

Paper Titles

Study on Critical Load Position and Cracking in Asphalt Layer of Continuously Reinforced Concrete Composite Asphalt Pavement
p.26

Py-GC-MS Analysis on Biomass Energy Components from Wood Extractives of Eucalyptus urophydis under High Temperature
p.30

Study on Corrosion Inhibition Performance of PASP Composite on A3 Carbon Steel in Seawater
p.33

Affection of Manufacture Parameters and Mixture Material on Plastic Alloy Bearings
p.37

Thermal Study on the Grinding Special-Shaped Surface of Granite Material
p.42

Ferroelectric and Optical Properties of BST/BZT/BST Sandwich Structure Thin Films Prepared by RF Sputtering
p.47

Effection of Wood Extractives on Burning Time of Fuel for Add-On Bioenergy
p.52

Orthogonal Analysis on Hardness of Nickel/Graphite Sealing Coating
p.55

Effect of Laser Processing on Electroless Copper Deposition on Modified Plastic
p.59

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 164Thermal Study on the Grinding Special-Shaped...

Thermal Study on the Grinding Special-Shaped Surface of Granite Material

Abstract:

The heat released from grinding process plays a very important role for the machining quality, so studying the temperature distributions on the machined surfaces of granite is necessary. For grasping the influencing factors of temperature, the experimental analysis basing on the infrared imaging method were carried out. The grinding temperatures for two kinds of granite materials (Qilu Red and Jinan Green) are measured. In the results, there are obvious variations of the highest temperatures with different grinding depths, spindle speeds and feed velocities on the machined surfaces. Then, it is suggested that the degree of difficulty is affected by property of granite material to a great extent.