Optimization of Sanding Parameters for Surface of Pyinkado Plates

Abstract:

Abstract: In order to analyze the relation between surface roughness of Pyinkado plates and sanding parameters, an orthogonal experiment and a single factor experiment were performed. The results show that the mesh of the sandpaper has remarkable influence on surface roughness of Pyinkado plates, but the feeding speed and sanding thickness don’t; when the mesh of the sandpaper is 150, the feeding speed is 6 m/min and sanding thickness is 0..4 mm during the first sanding and the mesh of the sandpaper is 240, the feeding speed is 9m/min and sanding thickness is 0.15mm during the second sanding, the smallest roughness (Ra) was obtained as 2.81μm. Considering production efficiency, changing feeding speed into 9 m/min in the theory optimization scheme, engineering optimization scheme was obtained, and the wood surface roughness (Ra) is 2.91μm.

• Periodical: Applied Mechanics and Materials (Volumes 174-177)
• Pages: 175-179
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.174-177.175
• Online since: May 2012
• Authors: Jian Min Zhang, Chu Wang Su, Jing Da Huang, Yi Ren, Ze Kun Wang
• Keywords: Optimization, Orthogonal Test, Pyinkado, Sanding Parameters, Surface Roughness (SR)

References

[1] RICHTE R K, FEIST W C, KNAEBE M T. The effect of surface roughness on the performance of finishes. Part 11 Roughnessc haracterization and stain performance [J]. Forest Products Journal, 1995, 45(7P8): 912-916.

[2] WANG Q Q. Surface roughness and sanding quality control for wood furniture [J]. China Wood industry, 2007, 21(2): 26-28. (In Chinese)

[3] WANG M Z, WANG J Y, LI L. Roughness and roughness sense of wood surface from different machining processes [J], Journal of Beijing Forestry University, 2005, 27(1): 14-18. (In Chinese)

[4] WANG T H, LI L. The reasonable combination of grinding ways [J]. China Wood industry, 1999, 13(4): 41-42. (In Chinese)

[5] GAO J G, JIANG Z F, HUANG J, et al. Research on the best work parameters of sand-belts with broadband sanding machine, Forestry Science & Technology, 2009, 34(2): 52-54. (In Chinese)

[6] GAO J G, YU B, JIANG Z F, et al. the influence of main parameters of broadband sanding machine on its processing surface roughness, Forestry Science & Technology, 2009, 34(3): 57-58. (In Chinese)

[7] ZHANG J, ZHANG Z K. Research about sanding parameters of the woodwork shaped surface based on Taguchi Method [J], Wood Processing Machinery, 2011(4): 15-18. (In Chinese)

[8] LI X, CHEN Y G ,LI L. Abrasive belt sanding technology of wood-based panel [J].Wood Processing Machinery, 2010(3): 44-47. (In Chinese)