The Technology on Producing the First Class Plywood Using Fast Growing Eucalyptus Timber

Abstract:

There were three key factors including glue quantity of veneer, hot-pressing time, hot-pressing temperature to be researched on the effect of plywood performance, which gave a effective conclusion about technology parameter. The results indicated that the three factors obviously were related to the bonding strength and ranked as hot-pressing time > glue quantity of veneer > hot-pressing temperature in sequence. The best groups for production technology were that glue quantity of veneer was 320 g/m2 with hot-pressing time and temperature of 1.2 mm/min and 135 °C respectively.

• Periodical: Applied Mechanics and Materials (Volumes 193-194)
• Pages: 496-499
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.193-194.496
• Online since: August 2012
• Authors: Kai Fu Li, Kai Meng Xu
• Keywords: Bonding Strength, E.urophylla×E.grandis, Orthogonal Experiment, Plywood

References

[1] Yiqiang Wu: Journal of Central South Forestry University, Vol.3(2000),pp.34-35,in Chinese.

[2] Yiqiang Wu: Journal of Central South Forestry University, Vol.3(2000),pp.43-46,in Chinese.

[3] Wanxi Peng : Wood Extractives (Chemical Industry Press, Beijing, 2010).

[4] Shuxiong Qi : Eucalyptus (China Forestry Press, Beijing, 2002).

[5] Gominho J, Figueira J, Rodrigues JC: Wood Fiber Science ,Vol.33(2001),pp.3-8.

[6] Ken Eldridge et al. Eucalyptus Domestication and Breeding (Clarendon Press, Oxford,1993).

[7] Bihua Wang: Green Technology, Vol.1(2012),pp.79-80,in Chinese.

[8] Bangxing Shen: Experiment Design and Application (China Metrology Press,Beijing,2005).