Influence of Process Parameters on Temperature Field in Laser Remelting Coating Prepared by Plasma Spraying on Titanium Alloy Surface

Hua Feng Guo; Tao Sun; Zhi Li; Ju Li Li

doi:10.4028/www.scientific.net/AMM.197.802

Paper Titles

Effect on Measurement of the Radiated Acoustic Field of Underwater Structure Based on NAH with Swinging Measuring Surface
p.778

Research on the Remote Monitoring System of Building Energy Consumption Based on GSM/GPRS
p.782

Effect of Particle Size Distribution on Microstructure and Wettability of 316L Coating
p.787

Mathematical Modeling of Mixing and Flow Phenomena of Municipal Solid Waste on the Grate
p.792

Research on the Mechanism of Fatigue Crack Initiation of X60 Pipeline Steel after Per-Tension Deformation
p.798

Influence of Process Parameters on Temperature Field in Laser Remelting Coating Prepared by Plasma Spraying on Titanium Alloy Surface
p.802

The Factors Influcing Energy Transfer Efficiency of Micro-Actuator
p.808

Analysis and Research on Driver’s Comfort in the Process of Getting on and off the Car
p.814

Effect of Neodymium Magnet Field on Operation of Inductive Watt-Hour Meters
p.820

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 197Influence of Process Parameters on Temperature...

Influence of Process Parameters on Temperature Field in Laser Remelting Coating Prepared by Plasma Spraying on Titanium Alloy Surface

Abstract:

In order to research the effect of process parameters on temperature field evolution in laser remelting coating prepared by plasma spraying on titanium alloy surface，the finite element model of laser multi-tracks remelting temperature field was established based on ANSYS, and remelting temperature field was analyzed. The analysis results show that: under certain scanning velocity and laser spot diameter, too small laser power can't achieve metallurgical combination between coating and substrate; the effect on temperature field of scanning velocity was smaller than laser power; the influence on molten pool center temperature and remelting width of spot diameter is bigger; preheating coating and substrate can be effectively balance remelting process temperature field, thereby reducing the thermal stress and coating cracks appear chance.Through the calculation model can master the evolution of the temperature of lasre remelting process and can provide the theory basis for process parameter selection and optimization.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 197)

Pages:

802-807

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.197.802

Citation:

Cite this paper

Online since:

September 2012

Authors:

Hua Feng Guo, Tao Sun, Zhi Li, Ju Li Li

Keywords:

Laser Remelting, Process Parameter, Temperature Field, Titanium Alloy

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] N. Al-Aqeeli, B.S. Yilbas, N. Tabet. Surface & Coatings Technology. Vol. 205(2011), p.3073.

Google Scholar

[2] You Wang, Chonggui Li, Lixin Guo etal. Surface & Coatings Technology. Vol. 204(2010), p.3559.

Google Scholar

[3] Li Jianing, Chen Chuanzhong, Lin Zhaoqing etal. Journal of Alloys and Compounds. Vol. 509(2011), P4882.

Google Scholar

[4] GUO Lixin , LIU Rongxiang , WANG Yaming etal. TRANSACTIONS OF MATERIALS AND HEAT TREATMENT. Vol. 30(2)(2009), pp.134-137.

Google Scholar

[5] GONG Zhi qiang, WU Zijian, LIU Yan fei. CHINA SURFACE ENGINEERING, Vol. 24(1) (2011), pp.12-15.

Google Scholar

[6] YIN Bin, ZHOU Hui d i, XU Hai yan etal. Journal ofMaterials Protection. Vol. 44(3)( 2011), pp.71-73.

Google Scholar

[7] B.S. Yilbas,S. S. Akhtar,A. Matthews etal. Journal of Manufacturing Science and Engineering. Vol. 133(2011), p.18.

Google Scholar

[8] Wang Dongsheng, Tian Zongjun，Shen Lida etal. . CHINESE JOURNAL OF LASERS. Vol36(1) (2009), pp.224-230.

Google Scholar

[9] Wang Dongsheng, Tian Zongjun, Shen Lida etal. APPL I ED LAS ER. Vol. 27(6) (2007), pp.444-449.

Google Scholar

[10] Hua Feng Guo, Jian Zhong Zhou, Tao Sun etal. Advanced Materials Research. Vol. 189-193 (2011), pp.340-346.

Google Scholar