Treatment Project for Wastewater from Automobile Painting

Abstract:

In this experiment, the combination of physic-chemical and biological methods was applied. Firstly, degreasing wastewater and painting wastewater were pretreated by chemicals respectively. And the removal rate of COD_Cr is more than 50% and about 65% respectively. After pretreatment，the effluents together with electrophoresis wastewater were treated by the coagulation-flotation and SBR process. And the removal rate of COD_Cr reached more than 80%, which achieved primary standards of "Integrated Wastewater Discharge Standard"(GB8978-1996). After the separated pre-treatment, the consuming amount of the chemicals had obviously lowered than the conventional mixing treatment, as well as the sludge. Most importantly, this process ensures good quality of water. So it is feasible economically and technically to use separated pretreatment, air flotation and SBR to treat automotive painting wastewater.

• Periodical: Applied Mechanics and Materials (Volumes 209-211)
• Pages: 1986-1989
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.209-211.1986
• Online since: October 2012
• Authors: Yu Ping Tian, Shuang Shuang Kong
• Keywords: Air Flotation, Painting Wastewater, SBR Process, Separated Pre-Treatment

References

[1] X.H. Zhang, X.Y. Peng and F. Liu: Journal of Environmental Engineering, Vol 4 (2010), pp.1125-1128. (In Chinese).

[2] H.G. Jiang, L. Luo and L.F. Zhu: Water Treatment Technology, Vol 35 (2009), pp.113-114. (In Chinese).

[3] X.C. Wang and Y.S. Jiang. Coating technology: Beijing Chemical Industry Press (1986). (In Chinese).

[4] S.G. Liu and X.H. Huang: Water Supply and Drainage, Vol 27 (2001), pp.53-56. (In Chinese).

[5] L. Liao, Y.F. Wu, et al: Environmental Technology, (2000), pp.18-21. (In Chinese).

[6] X.X. Wei. Environmental engineering design manual: Hunan Science and Technology Press (1992). (In Chinese).