Structural Optimization on Composite Blades of Large-Scale Wind Turbines

Abstract:

Turbine blades used in large-scale, horizontal-axis wind turbines are usually made from composite materials to reduce the weight while attaining a reasonable strength to weight ratio. The design of large wind turbine blades must consider both their aerodynamic efficiency and structural robustness. This paper presents an optimum design scheme for composite wind turbine blades. The first optimization phase produces the aerodynamic outer shape of a blade framed by airfoils with optimum cord lengths and twist angles along the blade spanwise direction. The second phase provides optimal material distribution for the composite blade. Loadings on the blade are simulated using wind field and wind turbine dynamics codes. The maximum loads on the turbine blade are then extracted and applied to a parameterized finite element model. A design example of a 3 MW wind turbine blade considering one critical load case with a mean wind speed of 25 m/s is demonstrated. The optimization result shows that although the initial blade model is an infeasible design, the optimization process eventually converges to a feasible solution with an optimized mass of 8750.2 kg.

• Periodical: Applied Mechanics and Materials (Volumes 284-287)
• Pages: 958-962
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.284-287.958
• Online since: January 2013
• Authors: Kun Nan Chen, Wei Hsin Gau
• Keywords: Composite Blade, FAST, Finite Element Analysis (FEA), Structural Optimization, Wind Turbine (WT)

References

[1] W.A. Timmer, An overview of NACA 6-digid airfoil series characteristics with reference to airfoils for large wind turbine blades, the 47th AIAA Aerospace Science Meeting Including the New Horizons Forum and Aerospace Exposition, Jan. 5-8, Orlando, Florida (2009).

DOI: 10.2514/6.2009-268

[2] A.J. Vitale, A.P. Rossi, Computational method for the design of wind turbine blades, Int. J. Hydrog. Energy. 33 (2008) 3466-3470.

DOI: 10.1016/j.ijhydene.2008.04.054

[3] V. Díaz Casás, F. Lopez Peňa, R.J. Duro, A. Lamas, Automatic aerodynamic design of a wind turbine through evolutionary techniques, IEEE Workshop on Intelligent Data Acquisition and Computing System: Technology and Applications, Sept. 5-7, Sofia, Bulgaria (2005).

DOI: 10.1109/idaacs.2005.283023

[4] D.J. Malcolm, A.C. Hansen, WindPACT Turbine Rotor Design Study, National Renewable Energy Laboratory, Golden, Colorado (2006).

[5] G. Bir, P. Migliore, Preliminary Structural Design of Composite Blades for Two- and Three-Blade Rotors, National Renewable Energy Laboratory, Golden, Colorado (2004).

DOI: 10.2172/15009673

[6] J.F. Manwell, J.G. McGowan, A.L. Rogers, Wind Energy Explained: Theory, Design and Application, John Wiley & Sons, Chichester, England, (2002).

[7] M. Drela, XFOIL 6. 9 User Primer, MIT Press, Cambridge, Massachusetts, (2001).

[8] B.J. Jonkman, M.L. Buhl, Jr., TurbSim User's Guide for Version 1. 40, National Renewable Energy Laboratory, Golden, Colorado (2008).

[9] M.J. Jason, M.L. Buhl, Jr., FAST User's Guide, NREL, Golden, Colorado (2005).