Study on the Factors of Influence on the Production Process of Coal Gangue Sintered Brick

Jia Di Liu

doi:10.4028/www.scientific.net/AMM.357-360.1176

Paper Titles

The Research of the Effect of Fly Ash on the Shrinkage Property of Commercial Concrete
p.1154

Experimental Research on Coal Gangue Grouting Material for Gob Filling
p.1158

The Study for Concrete Frost Resistance Durability under the Action of Multiple Factors
p.1167

Property of Water-Reducing and Crystallization on Superplasticize of the Concrete
p.1171

Study on the Factors of Influence on the Production Process of Coal Gangue Sintered Brick
p.1176

A Study on Modified Methylnaphthalene Sulfonate Formaldehyde Condensates: Synthesis, Structures and Asphalt Emulsification
p.1180

Research on Composite Strengthening Nano-Technique of Recycled Aggregate
p.1189

Techno-Economic Analysis of Fiber Reinforced Polymer Substation
p.1194

Research of Performance of Low Amount of Cement Manufactured-Sand Concrete
p.1200

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 357-360Study on the Factors of Influence on the...

Study on the Factors of Influence on the Production Process of Coal Gangue Sintered Brick

Abstract:

For coal gangue sintered brick production process, the effect factors are discussed, the best process factors are: coal gangue maximum size should be less than 3 mm, suitable for calorific value for 400 ~ 600 kcal/kg; Forming water is not more than 17%, extrusion pressure is not more than 3.0 MPa; Dry air brick moisture content should be less than 6%; Firing temperature should be controlled in more than 1050 °C.