Implementation of Continuous Flow System in Manufacturing Operation

Abstract:

The Continuous Flow System (CFS) is a production system that focuses on one piece flow product at every process in the assembly line. The implementation of this CFS could lead to operational excellence in terms of productivity, space utilization and the number of workers. CFS can be considered as a lean manufacturing foundation and its effective implementation promises significant savings in operation. CFS is achieved through a series of associated kaizen activities at the identified working place. The kaizen activities include establishment of Standardized Work (SW), implementation of U-shaped line and establishment of Material Handling System (MHS). All these activities are carried with one ultimate goal; to eliminate identified waste at the work place. This is essential to any CFS implementation. This paper presents a series of kaizen activities that have been engaged in creating the continuous flow system at the identified assembly line. This is a case-based study which was conducted at a local auto-component company in Malaysia. Findings from the results show that the company has achieved high productivity, minimal space utilization as well as reduction in number of direct manpower. The outcome of this CFS implementation confirms that it has met the supposedly lean principles also known as the one piece flow. Therefore, the objective of this study is to highlight the implemented kaizen activities and its benefit in achieving the CFS of the case study.

• Periodical: Applied Mechanics and Materials (Volume 393)
• Pages: 9-14
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.393.9
• Online since: September 2013
• Authors: Ahmad Adnan Naufal, Ahmed Jaffar, Yusoff Noriah, Nurul Hayati Abdul Halim
• Keywords: Continuous Flow System, Lean Manufacturing, One Piece Flow

References

[1] N. Singh and K. Shek, The development of a kanban system: A case study, Int. J. of Operations and Production Management. 10 (1990) 28-36.

[2] A. Krishnamurthy and D. Claudio, Pull systems with advance demand information, Proceedings of the 2005 Winter Simulation Conference. 1574446 (2005) 1733-1742.

DOI: 10.1109/wsc.2005.1574446

[3] C. Sendil Kumar and R. Panneerselvam, Literature review of JIT-kanban system, The Int. J. of Advanced Manufacturing Technology. 32 (2007) 393-408.

DOI: 10.1007/s00170-005-0340-2

[4] A. Smalley, Creating level pull, first ed., The lean enterprise institute, Cambridge, (2004).

[5] M. Rother and R. Harris. Creating Continuous Flow, first ed., The lean enterprise institute, Massachusetts, (2001).

[6] A. Berger, Continuous improvement and kaizen: standardization and organizational designs, Intergrated Manufacturing Systems. 8 (1997) 110-117.

DOI: 10.1108/09576069710165792

[7] J. Barraza, E. Ballard, T. Ilg and V. Smith, Application of lean manufacturing principles Darht-II induction cell refurbishment, Pulsed Power Conference IEEE. (2005) 465-468.

DOI: 10.1109/ppc.2005.300689

[8] R.A. Kasul and J.G. Motwani, Successful implementation of TPS in a manufacturing setting: A case study, Industrial Management and Data Systems. 97 (1997) 274-279.

DOI: 10.1108/02635579710191707

[9] B. Stump, and F. Badurdeen, Integrating lean and other strategies for mass manufacturing: a case study, J. of Intelligent Manufacturing. (2009) 1-16.

DOI: 10.1007/s10845-009-0289-3

[10] H. M Wee and S. Wu, Lean supply chain and its effect on product cost and quality: A case study on Ford Motor Company, An Int. J. on Supply Chain Management. 14 (2009) 335-341.

DOI: 10.1108/13598540910980242

[11] Andrew Lee-Mortimer, A lean route to manufacturing survival, Assembly Automation. 26 (2006) 265-272.

DOI: 10.1108/01445150610705155

[12] S. Taj and C. Morosan, The impact of lean operations on the Chinese manufacturing performance, J. of Manufacturing Technology Management. 22 (2011) 223-240.

DOI: 10.1108/17410381111102234

[13] R. Domingo, R. Alvarez, M. Peña and R. Calvo, Material flow improvement in a lean assembly line: A case study, " Assembly Automation. 27 (2007) 141-147.

DOI: 10.1108/01445150710733379

[14] J. Motwani and Z. Mohamed, Flow manufacturing – necessity, benefits and implementation: A case study, Industrial Management and Data Systems. 102 (2002) 73-79.

DOI: 10.1108/02635570210419618

[15] V. K Khanna and R. Shankar, Journey to implement Toyota Production System – A case study, J. of Advances in Management Research. 5 (2008) 80-88.

DOI: 10.1108/97279810880001269

[16] N. Zheng and X. Lu, Comparative study on push and pull production system based on Anylogic, Int. Conference on Electronic Commerce and Business Intelligence. (2009) 455-458.

DOI: 10.1109/ecbi.2009.26

[17] J. Matzka, M. Di Mascolo, K. Furmans, Buffer sizing of a Heijunka Kanban system, J. of Intelligent Manufacturing. 23 (2009) 49-60.

DOI: 10.1007/s10845-009-0317-3