Experiments of Rock Cutting with Nano-Cemented Carbide

Abstract:

Nano cemented carbide is a new style cutter material. Because its grain size is very small, it is superior to common cemented carbide in properties, such as high hardness, fracture toughness, flexural strength and higher abrasion resistance. It is proposed to have wide application prospect to tools and mould manufacturing, machinery manufacturing, geological drilling, mining, oil field development, etc. In this paper, nanocemented carbide tool was ground with ELID technology, and the marble were cut with nanocemented carbide, and the cutting properties of nanocemented carbide were studied. Results imply that the tool life of nanocemented carbide is 0.5-1 times longer than that of common cemented carbide at low cutting speed. Which means the nanocemented carbide is more suitable for machining hard and brittle material than common cemented carbides at low cutting speed. And the microscopic analysis showed, the mechanism of tool wear is the abrasive wear as well as the shedding of WC hard phase within Co phase caused by the hard spots shed from the marble embedding in the internal part of binder phase Co which is located in the hard phase WC.

• Periodical: Applied Mechanics and Materials (Volumes 423-426)
• Pages: 962-965
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.423-426.962
• Online since: September 2013
• Authors: Ji Cai Kuai*
• Keywords: ELID Grinding Technology, Marble, Nanocemented Carbide, Tool Life

References

[1] V. Bonache, M.D. Salvador and V.G. Rocha: Ceramics International Vol. 37 (2011), p.1139.

[2] J.C. Kuai, F.H. Zhang: Tribology Vol. 31 (2011), p.48 (In Chinese).

[3] J.C. Kuai, F.H. Zhang: Optics and Precision Engineering Vol. 18 (2010), p.406 (In Chinese).

[4] J.C. Kuai: Tool Engineering Vol. 46 (2012), p.18 (In Chinese).

[5] S.Z. Li: Drilling technology (Geological Publishing House, Beijing 1992). (In Chinese).

[6] J.C. Kuai, F.H. Zhang: Journal of Northeast Forestry University Vol. 36 (2008), p.57 (In Chinese).