Rapid Prototyping in Developing Process with CA Systems Application

Abstract:

Rapid Prototyping (RP) presents the automatic production of physical parts using by additive manufacturing technology. The start techniques for Rapid Prototyping became available in the late 1980s and were used to produce models and prototype parts. Today they are used for a much wider range of applications and are even used to manufacture production-quality parts in relatively small numbers. Rapid Prototyping is widely used in the automotive, aerospace, medical, and consumer products industries. In paper is presented process of design product development, product production and testing of products produced by Fused Deposition Modelling rapid prototyping technology.

• Periodical: Applied Mechanics and Materials (Volume 464)
• Pages: 399-405
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.464.399
• Online since: November 2013
• Authors: Ludmila Novakova-Marcincinova*, Jozef Novak-Marcincin
• Keywords: CA System, Developing Process, Rapid Prototyping (RP)

References

[1] C. K. Chua, K. F Leong, C. S. Lim, Rapid Prototyping: Principles and Applications. World Scientific Publishing, Singapore, (2004).

[2] T. Galeta, P. Raos, Somolanji: Impact of structure and building orientation on strength of 3D printed models. KGK Kautschuk Gummi Kunststoffe, Vol. 65, No. 10, 2012, pp.36-42.

[3] I. C. Dima, J. Novak-Marcincin, M. C. Duica, A. F. Cucui, Applying the Markow chain" theory in the case of operating several tools. Recent Researches in Social Science, Digital Convergence, Manufacturing and Tourism - IC-SSSE-DC, 11, 2011, pp.143-151.

[4] D. Kovacevic, I. Budak, A. Antic, B. Kosec, Special Finite Elements: Theoretical background and Application, Tehnicki Vjesnik, 18, 4, 2011, pp.649-655, ISSN 1330-3651.

[5] V. Modrak, Evaluation of structural properties for business processes. ICEIS 2004 - Proceedings of the Sixth International Conference on Enterprise Information Systems, 2004, pp.619-622.

[6] J. Jurko, A. Panda, M. Gajdos, M., Accompanying phenomena in the cutting zone machinability during turning of stainless steels. Int. Journal of Machining and Machinability of Materials, Vol. 5, No. 4, 2009, pp.383-400, ISSN 1748-5711.

DOI: 10.1504/ijmmm.2009.026899

[7] J. Novak-Marcincin, J. Barna, L. Novakova-Marcincinova, V. Fecova, Analyses and Solutions on Technical and Economical Aspects of Rapid Prototyping Technology. Tehnicki vjesnik, Vol. 18, No. 4, 2011, pp.657-661, ISSN 1330-3651.

DOI: 10.1063/1.4707641

[8] L. Novakova-Marcincinova, J. Barna, V. Fecova, M. Janak, J. Novak-Marcincin, Intelligent Design of Experimental Gearbox with Rapid Prototyping Technology Support. In: Proceedings of 15th International Conference on Intelligent Engineering Systems INES, Poprad, 2011, pp.77-80.

DOI: 10.1109/ines.2011.5954723

[9] J. Novak-Marcincin, M. Janak, L. Novakova-Marcincinova, Increasing of Product Quality Produced by Rapid Prototyping Technology. Manufacturing Technology, Vol. 12, No. 12, 2012, pp.71-75, ISSN 1213-2489.

DOI: 10.21062/ujep/x.2012/a/1213-2489/mt/12/1/71

[10] L. Novakova-Marcincinova, V. Fecova, J. Novak-Marcincin, M. Janak, J. Barna, Effective Utilization of Rapid Prototyping Technology. Materials Science Forum, Vol. 713, 2012, pp.61-66, ISSN 1662-9752.

DOI: 10.4028/www.scientific.net/msf.713.61

[11] L. Novakova-Marcincinova, M. Janak, Application of Progressive Materials for Rapid Prototyping Technology. Manufacturing Technology, Vol. 12, No. 12, 2012, pp.75-79, ISSN 1213-2489.

DOI: 10.21062/ujep/x.2012/a/1213-2489/mt/12/1/75

[12] L. Novakova-Marcincinova, J. Novak-Marcincin, J. Barna, J. Torok, Special materials used in FDM rapid prototyping technology application. INES 2012 - IEEE 16th International Conference on Intelligent Engineering Systems, Proceedings, art. no. 6249805, 2012, pp.73-76.

DOI: 10.1109/ines.2012.6249805

[13] L. Novakova-Marcincinova, V. Fecova, J. Novak-Marcincin, M. Janak, J. Barna, Effective Utilization of Rapid Prototyping Technology. AIP Conference Proceedings, Vol. 1431, 2012, pp.834-841, ISSN 0094-243X.

DOI: 10.1063/1.4707641

[14] L. Novakova-Marcincinova, J. Novak-Marcincin, Selected testing for rapid prototyping technology operation. Applied Mechanics and Materials, Vol. 308, 2013, pp.25-31, ISSN 1660-9336.

DOI: 10.4028/www.scientific.net/amm.308.25

[15] L. Novakova-Marcincinova, J. Novak-Marcincin, Testing of the ABS materials for application in Fused Deposition Modeling technology. Applied Mechanics and Materials, Vol. 309, 2013, pp.133-140, ISSN 1660-9336.

DOI: 10.4028/www.scientific.net/amm.309.133

[16] R. Pacurar, N. Balc, P. Berce, Research on Improving the Mechanical Properties of the SLS Metal Parts. In: Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium. Trnava, 2008, pp.1003-1004.

[17] R. Pacurar, N. Balc, F. Prem, Research on how to improve the accuracy of the SLM metallic parts. In: 14th International Conference on Material Forming Esaform, Belfast, Book Series: AIP Conference Proceedings, Vol. 1353, 2011, pp.1385-1390.

DOI: 10.1063/1.3589710