p.807
p.814
p.818
p.823
p.827
p.832
p.838
p.842
p.847
Research on the Mechanical Properties and Micro-Morphology of the Cement Stabilized Gravel with Rubber Particles
Abstract:
The primary objective of this paper was to study the mechanical properties of the cement stabilized gravel by different compact method which added rubber particles by using macroscopic and microscopic test. Through test of compression, relationships of mechanical properties of samples were studied. Pore structure and fractal characteristic of mixture was analyzed quantitatively using mercury intrusion porosimetry (MIP), scanning electron microscope (SEM) was applied to analyze the micro-morphology of samples. The tests results showed that the compressive strength of samples which prepared by using vibrating method was greater than that by static pressure method. Compressive strength of samples from vibrating method or static pressure method decreased with the rubber particles volume fraction increase. MIP tests showed that the mean pore diameter and porosity of mixture increased from about 70nm to 250nm and 9% to 24% with the rubber particles content increasing, respectively. SEM tests showed that the interface bonding between sand and hardened cement paste was better than that of between rubber particles and hardened cement paste.
Info:
Periodical:
Pages:
827-831
Citation:
Online since:
December 2013
Authors:
Keywords:
Price:
Сopyright:
© 2014 Trans Tech Publications Ltd. All Rights Reserved
Share:
Citation: