Velocity-Toughening and Crack Speed Oscillations in the Dynamic Fracture of PMMA Plates

Abstract:

To study the propagating behavior of a dynamic crack in brittle materials, an experimental technique was developed that measures the propagation speed of a fast crack in a preloaded brittle strip. The specimen is a rectangular PMMA plate clamped by two heavy steel fixtures that are attached to a MTS test machine. After the specimen was tensile loaded to a prescribed load level, a sharp crack was initiated at the middle point on one side of the specimen. Due to the brittleness of the material, the crack propagates quickly across the specimen. The propagation velocity of the crack was measured by using the equally spaced conductive lines that were painted on the specimen surface before the tests. High speed video camera was also used for monitoring the propagation behavior of the cracks. The experimental results show that for each preloaded plate, the crack arrives at a steady velocity v₀ after a short acceleration stage. In the steady stage crack propagation is in self-similar state. The steady velocity of the crack was found to be an increasing function of the energy G_c stored in the preloaded strip, which means that the material has a "velocity-toughening" property. When the crack speed exceeds a threshold, the crack exhibits apparent speed oscillations. This speed oscillation corresponds to the occurrence of the periodic grooves on the fractured surface. Further increase of the preload results in the bending, micro branching, and full bifurcations of the crack paths.

• Periodical: Applied Mechanics and Materials (Volume 566)
• Pages: 298-304
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.566.298
• Online since: June 2014
• Authors: Zhen Ya Zhang*, Zhong Duan, Feng Hua Zhou
• Keywords: Crack Propagation, Crack Speed Oscillation, Dynamic Fracture Energy, Equation of Motion for Propagating Crack, PMMA, Velocity-Toughening

References

[1] J.F. Kalthoff: The shadow optical method of caustics, in: A. Lagarde (Ed. ), Static and Dynamic Potoelasticity and Caustics, Springer, Berlin, (1987), pp.407-522.

DOI: 10.1007/978-3-7091-2630-1_4

[2] E. Sharon, S.P. Gross and J. Fineberg: Local crack branching as a mechanism for instability in dynamic fracture [J]. Phys. Rev. Lett. Vol. 74(1995), pp.1-10.

DOI: 10.1103/physrevlett.74.5096

[3] K. Ravi-Chandar and W.G. Knauss: An experimental investigation into dynamic fracture: II. Microstructural aspects [J], Int. J. Fract. (1984), pp.2665-80.

DOI: 10.1007/bf01152313

[4] J. Scheibert. et. al.: Brittle-Quasibrittle Transition in Dynamic Fracture: An Energetic Signature [J], Phys. Rev. Lett., vol. 104(2010), p.045501.

DOI: 10.1103/physrevlett.104.045501

[5] Kaiwen Xia et. al.: Observing ideal self-similar, crack growth in experiments [J]，Engng Frature Mech. vol. 73(2006), pp.2748-2755.

DOI: 10.1016/j.engfracmech.2006.05.001

[6] A. Livne, G. Cohen and J. Fineberg: University and Hysteretic Dynamics in Rapid Fracture [J]. Phys. Rev. Lett., vol. 94(2005), p.224301.

DOI: 10.1103/physrevlett.94.224301

[7] A.J. Rosakis, J. Duffy and L.B. Freud: The determination of dynamic fracture toughness of AISI 4340 steel by the shadow spot method [J]. J. Mech. Phys. Solids，vol. 32(1984), pp.443-460.

DOI: 10.1016/0022-5096(84)90030-9

[8] K. Ravi-Chandar and B. Yang: On the role of microcracks in the dynamic fracture of brittle materials [J], J. Mech. Phya. Solids vol. 45(1997), pp.535-563.

DOI: 10.1016/s0022-5096(96)00096-8

[9] Kaninen M. F, Popelar C.H. Advanced Fracture Mechanics, Oxford Press, New York, (1985), pp.299-312.

[10] Fenghua Zhou, J-F Molinary and T. Shioya: A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials [J]. Engineering Fracture Mechanics，vol. 72 (2005), p.1383–1410.

DOI: 10.1016/j.engfracmech.2004.10.011

[11] Zhenya Zhang, Zhong Duan and Fenghua Zhou: Experimental and theoretical investigations on the velocity oscillations of dynamic crack propagating in brittle material [J], Acta Mecanica Sinica. vol. 45 (2013), pp.729-738.