Strengthening Schemes for Flexure and Torsion Using FRP Laminates: A State of Art Review

Abstract:

RC beams as a structural member contain a variety of non-uniform loads. These non-uniform loads caused combined effects of flexure and torsion. There are numerous studies available, that suggests different strengthening schemes using FRP laminates, as a solution for flexure and torsion deficient beams. Most of the experimental studies suggested individual strengthening schemes for flexure or torsional deficiency RC beams. However, the combined effects were not studied due to difference in experimental setup, testing procedure and specimen detailing. Therefore, the outcome of previous studies was needed to combine together to facilitate the strengthening process as a guideline case of such deficiency. Therefore, a combined review is presented by suggesting different configuration for flexure and torsion deficient RC beams. Most of the studies suggested that the application of FRP laminates at the soffit of beam is suitable for flexural strengthening. The application of U-shape or full wrap are suitable for strengthen torsion deficient beams. Similarly, 45° wraps are more effective than 90°wraps for improving ductility of torsion deficient beams.

• Periodical: Applied Mechanics and Materials (Volume 567)
• Pages: 511-516
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.567.511
• Online since: June 2014
• Authors: Muhammad Imran*, Nasir Shafiq, Ibrisam Akbar
• Keywords: CFRP, Deficiency, Eccentricity, Flexure, Reinforced Concrete, Torsion

References

[1] D. Kachlakev and D. D. McCurry, Behavior of full-scale reinforced concrete beams retrofitted for shear and flexural with FRP laminates, Composites Part B: Engineering, vol. 31, pp.445-452, (2000).

DOI: 10.1016/s1359-8368(00)00023-8

[2] H. Ronagh, M. Ameli, and P. Dux, Experimental investigations on FRP strengthening of beams in torsion, in FRP Composites in Civil Engineering - CICE 2004, ed: Taylor & Francis, 2004, pp.587-592.

DOI: 10.1201/9780203970850.ch65

[3] P. A. Ritchie, D. A. Thomas, L. W. Lu, and G. M. Conelly, External reinforcement of concrete beams using fiber reinforced plastics, ACI Structural Journal, vol. 88, (1991).

DOI: 10.14359/2723

[4] R. Irwin and A. Rahman, FRP strengthening of concrete structures–design constraints and practical effects on construction detailing, Available: Science Direct, www. sciencedirect. com. [Accessed September, 2009], (2002).

[5] A. Sharif, G. J. Al-Sulaimani, I. A. Basunbul, M. H. Baluch, and B. N. Ghaleb, Strengthening of initially loaded reinforced concrete beams using FRP plates, ACI Structural Journal, vol. 91, (1994).

DOI: 10.14359/4594

[6] A. J. Lamanna, L. C. Bank, and D. W. Scott, Flexural strengthening of reinforced concrete beams using fasteners and fiber-reinforced polymer strips, ACI Structural Journal, vol. 98, pp.368-376, (2001).

DOI: 10.14359/10225

[7] E. David, E. Ragneau, and F. Buyle-Bodin, Experimental Analysis of Flexural Behaviour of Externally Bonded CFRP Reinforced Concrete Structures, Materials and Structures, vol. 36, pp.238-241, (2003).

DOI: 10.1007/bf02479617

[8] H. Pham and R. Al-Mahaidi, Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites, Composite Structures, vol. 66, pp.617-625, (2004).

DOI: 10.1016/j.compstruct.2004.05.010

[9] M. R. Aram, C. Czaderski, and M. Motavalli, Debonding failure modes of flexural FRP-strengthened RC beams, Composites Part B: Engineering, vol. 39, pp.826-841, (2008).

DOI: 10.1016/j.compositesb.2007.10.006

[10] A. H. Al-Saidy, A. S. Al-Harthy, K. S. Al-Jabri, M. Abdul-Halim, and N. M. Al-Shidi, Structural performance of corroded RC beams repaired with CFRP sheets, Composite Structures, vol. 92, pp.1931-1938, (2010).

DOI: 10.1016/j.compstruct.2010.01.001

[11] Y. T. Obaidat, S. Heyden, O. Dahlblom, G. Abu-Farsakh, and Y. Abdel-Jawad, Retrofitting of reinforced concrete beams using composite laminates, Construction and Building Materials, vol. 25, pp.591-597, (2011).

DOI: 10.1016/j.conbuildmat.2010.06.082

[12] A. A. El-Ghandour, Experimental and analytical investigation of CFRP flexural and shear strengthening efficiencies of RC beams, Construction and Building Materials, vol. 25, pp.1419-1429, (2011).

DOI: 10.1016/j.conbuildmat.2010.09.001

[13] J. Dong, Q. Wang, D. He, and Z. Guan, CFRP sheets for flexural strengthening of RC beams, 2011, pp.1000-1003.

DOI: 10.1109/icmt.2011.6003160

[14] E. Ahmed, H. R. Sobuz, and N. M. Sutan, Flexural performance of CFRP strengthened RC beams with different degrees of strengthening schemes, (2011).

DOI: 10.4028/www.scientific.net/kem.471-472.79

[15] M. J. Shannag, N. M. Al-Akhras, and S. F. Mahdawi, Flexure strengthening of lightweight reinforced concrete beams using carbon fibre-reinforced polymers, Structure and Infrastructure Engineering, pp.1-10, (2013).

DOI: 10.1080/15732479.2012.757790

[16] H. Saadatmanesh and M. Ehsani, RC Beams Strengthened with GFRP Plates. I: Experimental Study, Journal of Structural Engineering, vol. 117, pp.3417-3433, (1991).

DOI: 10.1061/(asce)0733-9445(1991)117:11(3417)

[17] e. a. Tom Norris, Shear and Flexural Strengthening of R/C Beams with Carbon Fibre Sheets, Journal of Structural Engineering, vol. 123, (1997).

[18] M. El-Mihilmy and J. Tedesco, Analysis of Reinforced Concrete Beams Strengthened with FRP Laminates, Journal of Structural Engineering, vol. 126, pp.684-691, 2000/06/01 (2000).

DOI: 10.1061/(asce)0733-9445(2000)126:6(684)

[19] A. M. Okeil, S. El-Tawil, and M. Shahawy, Flexural Reliability of Reinforced Concrete Bridge Girders Strengthened with Carbon Fiber-Reinforced Polymer Laminates, Journal of Bridge Engineering, vol. 7, pp.290-299, (2002).

DOI: 10.1061/(asce)1084-0702(2002)7:5(290)

[20] A. F. Ashour, S. A. El-Refaie, and S. W. Garrity, Flexural strengthening of RC continuous beams using CFRP laminates, Cement and Concrete Composites, vol. 26, pp.765-775, (2004).

DOI: 10.1016/j.cemconcomp.2003.07.002

[21] M. Z. Jumaat, M. A. Rahman, and M. A. Alam, Premature Failures in Plate Bonded Strengthened RC Beams with an Emphasis on Premature Shear: A Review, International Journal of the Physical Sciences, vol. Vol. 6(2), pp.156-168, (2011).

[22] C. Constantin E, Analytical model for the torsional behaviour of reinforced concrete beams retrofitted with FRP materials, Engineering Structures, vol. 29, pp.3263-3276, (2007).

DOI: 10.1016/j.engstruct.2007.09.009

[23] S. Panchacharam and A. Belarbi, Torsional behavior of reinforced concrete beams strengthened with FRP Composites, 2002, pp.1-11.

[24] A. Ghobarah, M. N. Ghorbel, and S. E. Chidiac, Upgrading Torsional Resistance of Reinforced Concrete Beams Using Fiber-Reinforced Polymer, Journal of Composites for Construction, vol. 6, pp.257-263, (2002).

DOI: 10.1061/(asce)1090-0268(2002)6:4(257)

[25] A. K. Y. Hii and R. Al-Mahaidi, Experimental Investigation on Torsional Behavior of Solid and Box-Section RC Beams Strengthened with CFRP Using Photogrammetry, Journal of Composites for Construction, vol. 10, pp.321-329, (2006).

DOI: 10.1061/(asce)1090-0268(2006)10:4(321)

[26] M. Reza Mohammadizadeh, M. Javad Fadaee, and Hamid Reza Ronagh, Improving Torsional Behaviour of Reinforced Concrete Beams Strengthened with Carbon Fibre Reinforced Polymer Composite, ed, (2009).

[27] A. Deifalla and A. Ghobarah, Strengthening RC T-Beams Subjected to Combined Torsion and Shear Using FRP Fabrics: Experimental Study, Journal of Composites for Construction, vol. 14, pp.301-311, (2010).

DOI: 10.1061/(asce)cc.1943-5614.0000091

[28] A. S. Mahmood and M. N. Mahmood, Torsional Behavior of Prestressed Concrete Beams Strengthened with CFRP Sheets, in 16th International Conference on Composite Structures (ICCS 16), (2011).

[29] C. Tudu, Study of torsional behaviour of rectangular reinforced concrete beams wrapped with GFRP, (2012).

[30] V. H. Jariwala, P. V. Patel, and S. P. Purohit, Strengthening of RC Beams Subjected to Combined Torsion and Bending with GFRP Composites, Procedia Engineering, vol. 51, pp.282-289, (2013).

DOI: 10.1016/j.proeng.2013.01.038

[31] C. Constantin E, Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers – Experimental study, Construction and Building Materials, vol. 22, pp.21-29, (2008).

DOI: 10.1016/j.conbuildmat.2006.09.003

[32] Mohammadizadeh, M. R. Fadaee, and M. J., Torsional Behaviour of High-Strength Concrete Beams Strengthened Using CFRP Sheets; an Experimental and Analytical Study, Scientia Iranica Transaction a-Civil Engineering, vol. 16, pp.321-330, Jul-Aug (2009).

[33] M. Ameli, H. R. Ronagh, and P. F. Dux, Behavior of FRP strengthened reinforced concrete beams under torsion, Journal of Composites for Construction, vol. 11, pp.192-200, (2007).

DOI: 10.1061/(asce)1090-0268(2007)11:2(192)

[34] A. Hii and R. Al-Mahaidi, Torsional Capacity of CFRP Strengthened Reinforced Concrete Beams, Journal of Composites for Construction, vol. 11, pp.71-80, (2007).

DOI: 10.1061/(asce)1090-0268(2007)11:1(71)

[35] S. B. Talaeitaba and D. Mostofinejad, A New Test Setup for Experimental Test of RC Beams under Combined Shear and Torsion, Advanced Materials Research, vol. 335, pp.355-358, (2011).

DOI: 10.4028/www.scientific.net/amr.335-336.355

[36] A. R. Zojaji and M. Z. Kabir, Analytical approach for predicting full torsional behavior of reinforced concrete beams strengthened with FRP materials, Scientia Iranica, vol. 19, pp.51-63, (2012).

DOI: 10.1016/j.scient.2011.12.004