Modelling and Analysis of Electrical Discharge Alloying through Taguchi Technique

Ilangovan Arun; Muthukannan Durai Selvam; V. Senthilkumar

doi:10.4028/www.scientific.net/AMM.592-594.521

Paper Titles

Microstructure and Mechanical Properties of Friction Stir Welded Pure Copper
p.499

Modeling and Analysis on Influence of Channel Angle and Processing Route in Equal Channel Angular Pressing
p.504

Modeling and Parametric Investigation of WEDM for D-2 Tool Steel Using RSM and GA
p.511

Modeling of Material Removal Mechanism in Micro Electric Discharge Milling of Ti-6Al-4V
p.516

Modelling and Analysis of Electrical Discharge Alloying through Taguchi Technique
p.521

Multi Criteria Optimization of Electrochemical Discharge Micro-Machining Process during Micro-Channel Generation on Glass
p.525

Multi Response Optimization of Drilling Parameters during Drilling of Particle Board Using Grey Relational Analysis
p.530

Multi-Objective Optimization in Wire-Cut Electric Discharge Machining of Al 6063/Al₂O₃ Metal Matrix Composite through Response Surface Methodology
p.534

Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti–6Al–4V)
p.540

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 592-594Modelling and Analysis of Electrical Discharge...

Modelling and Analysis of Electrical Discharge Alloying through Taguchi Technique

Abstract:

Electrical discharge alloying was performed on AISI D2 tool steel with addition of nickel powder. Taguchi method has been used to plan and analysis the experiment.The major parameters like Peak current, pulse on time, and pulse off are taken for this study for formation of alloyed layer. The influences of these process parameters have been identified by Signal to noise ratio (S/N) and analysis of variance (ANOVA) and their results are within the limits of predicted and experimental values. The experiments were conducted on a specially designed apparatus in laboratory itself. The layer thickness varies from 70 to 140 μm and the highest hardness value of 1788 HV0.3 with a lower specific wear rate.

You might also be interested in these eBooks

Dynamics of Machines and Mechanisms, Industrial Research

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 592-594)

Pages:

521-524

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.592-594.521

Citation:

Cite this paper

Online since:

July 2014

Authors:

Ilangovan Arun*, Muthukannan Durai Selvam, V. Senthilkumar

Keywords:

COF, Electrical Discharge Alloying (EDA), Hardness, Specific Wear Rate, Taguchi Method

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Shu KM, Tu GC (2003) Study of electrical discharge grinding using metal matrix composite electrode. Int J Mach Tools Manuf 43: 845–854.

DOI: 10.1016/s0890-6955(03)00048-8

Google Scholar

[2] G. Boothroyd and A. K. Winston: Non-conventional machining processes in: Fundamentals of Machining and Machine Tools, (Marcel Dekker, Inc., New York, 1989) p.491.

DOI: 10.1080/10426919008953270

Google Scholar

[3] J. A. McGeough: Electrodischarge machining in: Advanced Methods of Machining, (Chapman & Hall, London, 1988) p.130.

Google Scholar

[4] Y. Tsunekawa, M. Okumiya, N. Mohri and I. Takahashi: Mater. Sci. Eng. A174 (1994) 193–198.

Google Scholar

[5] I. Arun, P. Vaishnavi, M. Duraiselvam, V. Senthilkumar ,V. Anandakrishnan Development of carbide intermetallic layer by electric discharge alloying on AISI-D2 tool steel. Int. J. Mater. Res. 105 (2014) E; page 1–8.

DOI: 10.3139/146.111067

Google Scholar