Optimization of Multiple Responses in Dry Turning Process Using Taguchi-Grey Relational Analysis

Abstract:

The present study investigates the optimization of multiple responses in turning of EN-8 steel by the Taguchi and grey relational analysis. The performance characteristics considered are tangential force, feed force and radial force. Grey relational theory is adopted to determine the best process parameters that give lower magnitude of tangential, feed, radial forces and optimal cutting parameters. An orthogonal array L₁₈ is used for the experimental design. The setting of process parameters— nose radius, 0.8mm; cutting speed, 60.65 m/min; feed rate, 0.04 mm/rev; and depth of cut, 0.60 mm— has highest grey relational grade and therefore produces best turning performance in terms of cutting forces.

• Periodical: Applied Mechanics and Materials (Volumes 592-594)
• Pages: 620-624
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.592-594.620
• Online since: July 2014
• Authors: Sumit Verma*, Hari Singh
• Keywords: EN-8 Steel, Forces, Optimization, Taguchi Grey Relational Analysis, Turning Operation

References

[1] Roy, R. K. A primer on Taguchi method (New York: Van Nostrand Reinhold) , (1990).

[2] Deng, Ju-Long. Introduction to grey system theory., The Journal of grey system 1, no. 1 (1989): 1-24.

[3] Manimaran, G., and M. Pradeep Kumar. Multiresponse optimization of grinding AISI 316 stainless steel using grey relational analysis., Materials and Manufacturing Processes 28, no. 4 (2013): 418-423.

DOI: 10.1080/10426914.2012.709347

[4] Lin, C.L. Use of the Taguchi and grey relational analysis to optimize turning operations with multiple performance characteristics., Materials and Manufacturing Processes, vol. 19, no. 2, (2004) pp.209-220.

DOI: 10.1081/amp-120029852

[5] Gopalsamy, Bala Murugan, Biswanath Mondal, and Sukamal Ghosh. Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA., The International Journal of Advanced Manufacturing Technology 45, no. 11-12 (2009).

DOI: 10.1007/s00170-009-2054-3

[6] Abhang, L. B., and M. Hameedullah. Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis., The International Journal of Advanced Manufacturing Technology 63, no. 1-4 (2012): 13-24.

DOI: 10.1007/s00170-011-3857-6