Effect of Heating and Cooling Mode on Temperature and Enthalpy of Phase Changes in PCM Modified Plaster

Zbyšek Pavlík; Oldrich Zmeskal; Milena Pavlíková; Robert Černý

doi:10.4028/www.scientific.net/AMM.595.149

Paper Titles

3D Modeling of Wind Turbine Blade Based on SolidWorks
p.123

Performance Comparison of Rod-Baffle and Segment-Baffle Heat Exchangers Using Numerical Simulations
p.128

On the Use of Vector-Valued Intensity Measure to Predict Peak and Cumulative Demands of Steel Frames under Narrow-Band Motions
p.137

Application of Two Different Methods for Determination of Water and Chloride Transport Parameters of Building Stones
p.143

Effect of Heating and Cooling Mode on Temperature and Enthalpy of Phase Changes in PCM Modified Plaster
p.149

Rebound Hammer Tests of Calcium Silicate Bricks – Effects of Internal Compressive Stress on Measurement Results
p.155

Combination Rules and Maximum Response for Steel Buildings with PMRF Represented by Complex 3D MDOF Systems
p.159

Ductility Reduction Factors for Steel Buildings Modeled as 2D and 3D Structures
p.166

Research on Real-Time Monitoring of Coal Mine Trackless Rubber Tyre Electric Vehicle
p.175

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 595Effect of Heating and Cooling Mode on Temperature...

Effect of Heating and Cooling Mode on Temperature and Enthalpy of Phase Changes in PCM Modified Plaster

Abstract:

Temperature and enthalpy of phase changes taking place in PCM (Phase Change Material)-modified plasters within their heating and cooling exposure are studied in the paper. The studied plasters are composed of hydrated lime, pozzolan admixture, silica sand, water, and encapsulated parrafinic wax that is used as PCM. The studied materials are characterized by bulk density, matrix density, and total open porosity. The temperature of phase changes, heat of fusion and crystallization are evaluated by DSC (Difference Scanning Calorimetry) analysis that is performed in inert nitrogen atmosphere. Experimental data reveal a substantial improvement of heat storage capacity of PCM-modified plasters as compared to the reference material without PCM.

You might also be interested in these eBooks

Recent Engineering Decisions in Industry

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 595)

Pages:

149-154

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.595.149

Citation:

Cite this paper

Online since:

July 2014

Authors:

Zbyšek Pavlík*, Oldrich Zmeskal, Milena Pavlíková, Robert Černý

Keywords:

Cooling Mode, Enthalpy of Phase Change, Heating Mode, Phase Change Materials (PCM), Phase Change Temperature, Plaster

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] J. Mlakar, J. Štrancar, Temperature and humidity profiles in passive building blocks, Build. Environ. Vol. 60 (2013) 185-193.

DOI: 10.1016/j.buildenv.2012.11.018

Google Scholar

[2] P. Wolkoff, S.K. Kjaergaard, The dichotomy of relative humidity on indoor air quality, Environ. Eng. Vol. 33 (2007) 850-857.

DOI: 10.1016/j.envint.2007.04.004

Google Scholar

[3] A. Sharma, K. Sagara, Latent heat storage materials and systems: a review, Int. J. Green Energy Vol. 2 (2005) 1-56.

Google Scholar

[4] Z. Pavlík, A. Trník, J. Ondruška, M. Keppert, M. Pavlíková, P. Volfová, V. Kaulich, R. Černý, Apparent Thermal Properties of Phase-Change Materials: An Analysis Using Differential Scanning Calorimetry and Impulse Method, Int. J. Thermophys. Vol. 34 (2013).

DOI: 10.1007/s10765-012-1169-1

Google Scholar

[5] X. Wang, E. Lu, W. Lin, T. Liu, Z. Shi, R. Tang, C. Wang, Heat storage performance of the binary system neopentyl glycol/pentaerythrotil and neopentyl glycol/trihydroxymenthylaminomethane as solid phase change materials, Energy Cons. Manage. Vol. 41 (2000).

DOI: 10.1016/s0196-8904(99)00097-7

Google Scholar

[6] Z. Pavlík, M. Pavlíková, P. Volfová, V. Kaulich, A. Trník, J. Ondruška, R. Černý, Properties of New Type of Plaster Containing Phase-Change Material, Int. Proc. Comput. Sci. Inf. Technol. (IPCSIT) 28 (2012) 122-126.

DOI: 10.1007/s10765-012-1169-1

Google Scholar