Machinability by Milling of Gray Cast Iron

Traian Grămescu; Constantin Cărăușu

doi:10.4028/www.scientific.net/AMM.657.88

Paper Titles

Experimental Study of Vibrations in Face Milling Cutting
p.68

Determination of Stressed-Deformed State of Fine Disc Tools with Inner Cutting Section under Conditions of their Pre-Stressing
p.73

Dynamic Behavior of Long Turned Workpieces
p.78

Machinability Aspects Investigations in Hard Milling of AISI W1 Hardened Tool Steel
p.83

Machinability by Milling of Gray Cast Iron
p.88

A Review of the Main Modeling Methods for Ball Nose End Milling Processes
p.93

Determination of Optimal Working Parameters of the Combined Burnishing - Turning Process by Applying the Method of Response Surfaces
p.98

Residual Stresses Generated by the Combined Burnishing - Cutting Process in the Worked Parts
p.103

On the Kinematic Structure of Cold Forming Machine-Tools with Several Main Effector Elements
p.111

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 657Machinability by Milling of Gray Cast Iron

Machinability by Milling of Gray Cast Iron

Abstract:

In the laboratory of cutting machining technologies from the “Gheorghe Asachi” Technical University of Iaşi, a series of investigations on the machinability of cast iron samples having various structures were designed and developed. The aim of the research was to know and to explain the way in which various constituents of some iron castings exert influence on the degree of wear of a milling tool made of high speed steel. Within this research, mathematical empirical models were determined, in order to calculate the cutting speed v₆₀, considered as an indicator for the evaluation of machinability. The research allowed establishing the factors able to have a major influence on tool wear phenomenon and obtaining thus a more complete image concerning the machinability of grey iron used for castings.

You might also be interested in these eBooks

Engineering Solutions and Technologies in Manufacturing

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 657)

Pages:

88-92

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.657.88

Citation:

Cite this paper

Online since:

October 2014

Authors:

Traian Grămescu*, Constantin Cărăușu

Keywords:

Cast Iron, Cutting, Experimental Methods, Machinability Evaluation, Milling, Milling Tools

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] T. Grămescu, Contribution to the study of machinability of some standardized Romanian irons (in Romanian). Doctoral thesis. Polytechnic Institute of Iaşi, România. (1982).

Google Scholar

[2] T. Grămescu, L. Slătineanu, V. Braha, I. Sârbu, Machinability of materials (in Romanian). Publishing house Tehnica-Info, Chişinău, (2000).

Google Scholar

[3] R.D. Griffin. H.J. Li, E. Eleftheroiu. C.E. Bates, Machinability of gray cast iron. Reprinted with permission from the American Foundry Society. available at: http: /www. atlasfdry. com/machinability. htm, accessed: 06. 02. (2014).

Google Scholar

[4] M. P. Tonkovič, J. Vranicovič, I. Mihocovič, The effect of inoculants on hardness and machinability of grey cast iron with flak graphite, RMZ – Materials and Geoenvironment. Vol. 56(4) (2009) 521–530.

Google Scholar

[5] Machining cast iron components. The American Foundry Society (AFS), available at: http: /www. afsinc. org/multimedia/contentMC. cfm?ItemNumber=11371, accessed: 06. 02. (2014).

Google Scholar