Micro Cantilever CO₂ Gas Sensor Based on Mass

Abstract:

Sensors had gained importance in all fields of science and technology and development of real time small devices with high sensitivity for in situ measurements at low cost has gained momentum. Micromachined cantilever provides a solution to this hunt. MEMS cantilever are the simplest of all the other mechanical structures and hence is considered for the ease of fabrication. Here a chemical CO₂ sensor is considered with the metal oxide layer as receptor to adsorb the CO₂ molecules leading to an increase in mass and microcantilever as the transducer part converting the change in mass to change in natural frequency. The sensitive SnO₂ layer increases the mass and hence decreases the resonant frequency. The inherent natural frequency of the cantilever is altered by the sensitive coating on top of the beam and the residual stresses present on the structure. In this paper, we investigate the SiO₂ cantilever with SnO₂ deposited on the top surface. Initially the microcantilever is analytically modelled and then is fabricated and characterized experimentally. Finally the error % is analysed between the analytical model and experimental results.

• Periodical: Applied Mechanics and Materials (Volumes 766-767)
• Pages: 528-533
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.766-767.528
• Online since: June 2015
• Authors: S. Subhashini*, A. Vimala Juliet
• Keywords: Chemical Sensor, MEMS, Micromachined Cantilever, Resonant Frequency

References

[1] G. Korotcenkov, Metal oxides for solid-state gas sensors: What determines our choice?, Mater. Sci. Eng. B, vol. 139, no. 1, p.1–23, Apr. (2007).

DOI: 10.1016/j.mseb.2007.01.044

[2] F. J. Rubio-sierra, R. Vázquez, and R. W. Stark, Transfer Function Analysis of the Micro Cantilever Used in Atomic Force Microscopy, vol. 5, no. 6, p.692–700, (2006).

DOI: 10.1109/tnano.2006.883479

[3] H. -S. Liao, K. -Y. Huang, E. -T. Hwu, and C. -S. Chang, Resonance-enhanced micromechanical cantilever for mass sensing, 2010 IEEE/ASME Int. Conf. Adv. Intell. Mechatronics, vol. 1, p.437–441, Jul. (2010).

DOI: 10.1109/aim.2010.5695755

[4] P. Li, J. Zhao, S. Yu, L. Guan, and Z. You, Resonating Frequency of a SAD Circuit Loop and Inner Microcantilever in a Gas Sensor, vol. 10, no. 2, p.316–320, (2010).

DOI: 10.1109/jsen.2009.2034381

[5] M. Villarroya, J. Verd, J. Teva, G. Abadal, F. Pérez, and N. Barniol, CANTILEVER BASED MEMS FOR MULTIPLE MASS SENSING, vol. 3, no. 1.

DOI: 10.1109/rme.2005.1543038

[6] A. Y. Ahmed, J. O. Dennis, M. H. M. Khir, M. Naufal, and M. Saad, Analytical Modeling of Mass-Sensitive Gas Sensor based on MEMS Resonator, p.1–3, (2011).

DOI: 10.1109/natpc.2011.6136422

[7] A. K. Pandey and K. P. Venkatesh, Effect of metal coating and residual stress on the resonant frequency of MEMS resonators, vol. 34, no. August, p.651–661, (2009).

DOI: 10.1007/s12046-009-0029-6

[8] J. Park, H. Cho, and S. Yi, NDIR CO2 gas sensor with improved temperature compensation, Procedia Eng., vol. 5, p.303–306, (2010).

DOI: 10.1016/j.proeng.2010.09.108

[9] B. Skariah and B. Thomas, Structural and Surface Analysis of B : SnO 2 Thin Films for Gas Sensing, vol. 5727, (2014).

[10] M. Narducci, B. Centro Nac. De Microelectron., Inst. de Microelectron. de Barcelona CNM-IMB (CSIC), and C. Figueras, E. ; Lopez, M.J. ; Gracia, I. ; Fonseca, L. ; Santander, J. ; Cane, A high sensitivity silicon microcantilever based mass sensor, in Sensors 2008 IEEE, 2008, p.1127.

DOI: 10.1109/icsens.2008.4716639

[11] T. S. K. Jae Hong Park, Tae Yun Kwon, Hyung Joon Kim, Seung Rae Kim, Dae Sung Yoon, Chae-Il Cheon, Hwan Kim, Resonance properties and mass sensitivity of monolithic microcantilever sensors actuated by piezoelectric PZT thick film, J. Electroceramics, vol. 17, no. 2–4, p.565–572, (2006).

DOI: 10.1007/s10832-006-6290-8