Mechanical and Thermal Properties of Polylactic Acid Filled Rice Straw

Nurul Hani Md Zubir; Sam Sung Ting; H. Kamarudin; S. Ragunathan; N.Z. Noriman; Mohd Mustafa Al Bakri Abdullah; Wang Jing

doi:10.4028/www.scientific.net/AMM.815.34

Paper Titles

Crystallinity and Influence of Citric Acid as a Compatibilizer in Low Density Polyethylene/Jackfruit Seed Flour Blends
p.14

Properties of Ethylene Propylene Diene Monomer/Recycled Acrylonitrile – Butadiene Rubber Blends (EPDM/rNBR): Effect of the Addition of Bamboo Fillers
p.19

The Effects on the Cure Characteristics and Physical Properties of Bamboo Activated Carbon Filled Styrene Butadiene Rubber (SBR) Compounds
p.24

Performance of Concrete by Using Palm Oil Fuel Ash (POFA) as a Cement Replacement Material
p.29

Mechanical and Thermal Properties of Polylactic Acid Filled Rice Straw
p.34

The Addition of Imperata cylindrica as Natural Filler in Epoxidized Natural Rubber Filled Recycled Nitrile Glove: Cure Characteristics and Physical Properties
p.39

Cure Characteristics and Physical Properties of Imperata cylindrica Activated Carbon Filled SMR L Compounding
p.44

Behaviour of Axially Loaded Composite Wall Panel by Using Finite Element Analysis
p.49

Effect of Recycled Nitrile Glove (rNBRg) Particle Sizes on Curing Characteristics and Physical Properties of Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Blends
p.54

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 815Mechanical and Thermal Properties of Polylactic...

Mechanical and Thermal Properties of Polylactic Acid Filled Rice Straw

Abstract:

Natural fiber reinforced polylactic acid based biocomposites are broadly considered by the researchers to compete with non-renewable petroleum based products. In this study, the biodegradable composites which are the polylactic acid, PLA and rice straw, RS were prepared by using heated two roll-mill at 180°C. Mechanical properties showed that the tensile strength and elongation at break, E_bdecreased with the increasing of RS while the Young’s modulus had increased. The TGA results confirmed that thermal stability of PLA with RS composites decreased when the RS fiber loading increased.

You might also be interested in these eBooks

Design and Development of Sustainable Manufacturing Systems

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 815)

Pages:

34-38

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.815.34

Citation:

Cite this paper

Online since:

November 2015

Authors:

Nurul Hani Md Zubir, Sam Sung Ting, H. Kamarudin, S. Ragunathan, N.Z. Noriman, Mohd Mustafa Al Bakri Abdullah, Wang Jing

Keywords:

Biocomposites, Polylactic Acid, Rice Straw, Tensile Test, Thermogravimetric Analysis (TGA)

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] S. Huda, N. Reddy, D. Karst, W. Wu, W. Yang and Y. Yang: J. Biobased Material Bioenergy Vol. 2 (2007), pp.177-190.

Google Scholar

[2] R. Senawi, S. Mohd Alauddin, R. Mohd Saleh and M. I. Shueb: International Journal of Bioscience, Biochemistry and Bioinformatics Vol. 3 (2013), pp.59-61.

Google Scholar

[3] S.T. Sam, H. Ismail and H.P.S.A. Khalil: Journal of Polymer Engineering Vol. 33 (2013), pp.579-588.

Google Scholar

[4] H.P.S. Abdul Khalil, I.U.H. Bhat, M. Jawaid, A. Zaidon, D. Hermawan and Y.S. Hadi: Materials and Design Vol. 42 (2012), pp.353-368.

DOI: 10.1016/j.matdes.2012.06.015

Google Scholar

[5] K.B. Andrzej, A.M. Abdullah and V. Jurgen: Compos. Part A: Applied Science and Manufacturing Vol. 41 (2010), pp.480-488.

Google Scholar

[6] P. Mingzhu, Z. Dingguo, Z. Xiaoyan and L. Zhina: Bioresource Technol. Vol. 38 (2010), pp.925-935.

Google Scholar

[7] M. Jonoobi, J. Harun, A. P. Mathew and K. Oksman: Composites Science and Technology Vol. 70 (2010), pp.1742-1747.

Google Scholar

[8] L. Jiang, B. Liu and J. Jinwen: Ind. Eng. Chem. Res. Vol. 48 (2009), pp.7594-7602.

Google Scholar

[9] L. Qin, J. Qiu, M. Liu, S. Ding, L. Shao, S. Lu, G. Zhang, Y. Zhao and X. Fu: Chemical Engineering Journal Vol. 166 (2011), pp.772-778.

Google Scholar

[10] S.T. Sam, H. Ismail and Z. Ahmad: Journal of Vinyl and Additive Technology Vol. 15 (2009), pp.252-259.

Google Scholar

[11] S.T. Sam, H. Ismail and Z. Ahmad: Polymer-Plastics Technology and Engineering Vol. 50 (2011), pp.957-968.

Google Scholar

[12] L. Qin, J. Qiu, M. Liu, S. Ding, L. Shao, S. Lu, G. Zhang, Y. Zhao and X. Fu: Chemical Engineering Journal Vol. 166 (2011), pp.772-778.

Google Scholar

[13] C. Nyambo, A.K. Mohanty and M. Misra: Macromolecular Materials and Engineering Vol. 296 (2011), pp.710-718.

Google Scholar

[14] S.T. Sam, H. Ismail, Z. Ahmad and C.T. Ratnam: Journal of Applied Polymer Science Vol. 124 (2012), pp.5220-5228.

Google Scholar