Balancing of Forces in Segments of Axial Bearing by Dynamometers

František Trebuňa; František Šimčák; Miroslav Pástor; Patrik Šarga

doi:10.4028/www.scientific.net/AMM.816.437

Paper Titles

Comparison of Different Estimation Algorithms Used in the Experimental Determination of Modal Parameters
p.412

Experimental Measurement of Stress Distribution
p.416

Experimental Identification of Failures of High-Pressure Pump Drive
p.421

Experimental and Numerical Analysis of the Damage Causes of Rail Traction Vehicles
p.426

Balancing of Forces in Segments of Axial Bearing by Dynamometers
p.437

Proposal of Methodology for Verification of Stress Distribution in Bolted Joints by Optical Method
p.443

Multiestimation Scheme for Identification and Adaptive Control of Nonlinear Laboratory Model DTS200
p.451

Extracting Load Research of Taper Interference Fit Made of Glass and Ceramics Parts Using a Servo Press
p.461

Vibrational Study of the Spinning Disc Using LDV Technique
p.469

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 816Balancing of Forces in Segments of Axial Bearing...

Balancing of Forces in Segments of Axial Bearing by Dynamometers

Abstract:

The Francis turbine in water power plant station is positioned at top and bottom axial hanging bearings. During reparation work the turbine was disassembled and during assembling the adjusting segments in the hanging bearings were released. In the paper are described procedures that are necessary in order to provide correct distribution of axial forces in twelve segments of upper axial hanging bearing by strain-gages applied on elastic pipes positioned under individual bearing segments.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 816)

Pages:

437-442

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.816.437

Citation:

Cite this paper

Online since:

November 2015

Authors:

František Trebuňa, František Šimčák, Miroslav Pástor*, Patrik Šarga

Keywords:

Bearing, Experimental Methods, Francis Turbine, Strain-Gages

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] F. Trebuňa, F. Šimčák, P. Trebuňa, M. Pástor, P. Šarga, Balancing of Forces in Segments of Axial Bearing Francis Turbine by Dynamometers, TU SjF, Košice, p.35, (2012).

DOI: 10.4028/www.scientific.net/amm.816.437

Google Scholar

[2] A. S. Kobayashi, Handbook and Experimental Mechanics. VCH Publishers Cambridge, p.1074, (1993).

Google Scholar

[3] F. Trebuňa and F. Šimčák, Handbook of Experimental Mechanics, first ed., Typopress, Košice, p.1526, ISBN 970-80-8073-816-7, (2007).

Google Scholar

[4] I. Fürbacher et al., Lexikon technických materiálů. Verlag Dashöfer, (2005).

Google Scholar

[5] F. Trebuňa and F. Šimčák, Odolnosť prvkov mechanických sústav. Emilena, TU SjF Košice, p.980, ISBN 80-8073-148-9, (2004).

Google Scholar

[6] F. Trebuňa and F. Šimčák, Elasticity, Strength and Plasticity in Mechanical Engineering, Košice, Emilena, p.484, (2005).

Google Scholar