Friction Stir Welding on Corner Joint with New Surface Preparation Design

Abstract:

Aluminium 6061 was joined by friction stir welding (FSW) with new surface preparation on corner design. The distribution micro structure in Corner-joints was tool welded rotation (rpm), and travel speed (mm/mnt) observed and analyzed. The welding parameters observing the tensile strength, micro structure and micro hardness it can be said. The result structure micro are homogen whilst from tensile test the strength joint is quilt good even better from preview publihsed papers. The obtained with the transverse speed 15 mm/menit, and 1500 rpm.

• Periodical: Applied Mechanics and Materials (Volume 836)
• Pages: 208-213
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.836.208
• Online since: June 2016
• Authors: Widia Setiawan, Djarot B. Darmadi, Wahyono Suprapto, Rudy Sunoko
• Keywords: Friction Stir Welding, New Surface Preparation Design

References

[1] W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, C.J. Dawes, G. B Patent Application No. 9125978. 8 (December 1991).

[2] Padgett PN, Paglia C, Buchheit RG. Characterization of corrosion behaviour in friction stir weld Al–Li–Cu AF/C458 Alloy. Friction stir welding and processing II. Warrendale (PA, USA): TMS; (2003).

DOI: 10.1002/9781118062302.ch17

[3] Kazi SH, Murr LE. Complex flow phenomena associated with friction-stir welding of aluminum alloys. In: Mishra RS, et al., editors. Friction stir welding and processing, Warrendale (PA): TMS; 2001. p.139–151.

DOI: 10.1016/b978-0-12-805368-3.00001-7

[4] McNelley TR, Swaminathan S, Su JQ. Recrystallization mechanisms during friction stir welding/processing of aluminum alloys. Scripta Mater 2008; 58: 349–54.

DOI: 10.1016/j.scriptamat.2007.09.064

[5] Ana C.F. Silva a, ⇑, Daniel F.O. Braga a, M.A.V. de Figueiredo b, P.M.G.P. Moreira a, Friction stir welded T-joints optimization, a Instituto de Engenharia Mecânica e Gestão Industrial (INEGI), R. Dr. Roberto Frias, 400 4200-465 Porto, Portugal b Faculdade de Engenharia da Universidade do Porto (FEUP), R. Dr. Roberto Frias, s/n 4200-465 Porto, Portugal.

DOI: 10.24867/ijiem-2021-4-295

[6] Yong Zhao ⇑, Lilong Zhou, Qingzhao Wang, Keng Yan, Jiasheng Zou, 2013, Defects and tensile properties of 6013 aluminum alloy T-joints by friction stir welding, Provincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, No. 2 Mengxi Road, Zhenjiang 212003, Jiangsu, China.

DOI: 10.30919/esmm5f1045

[7] Lei Cui, Xinqi Yang∗, Guang Zhou, Xiaodong Xu, Zhikang Shen, 2012, Characteristics of defects and tensile behaviors on friction stir welded AA6061-T4 T-joints, Tianjin Key Laboratory of Advanced Joining Technology, School of Material Science and Engineering, Tianjin University, Tianjin 300072, People's Republic of China.

DOI: 10.18057/ijasc.2015.11.1.2

[8] Xiaopeng Hou, Xinqi Yang ⇑, Lei Cui, Guang Zhou, 2013, Influences of joint geometry on defects and mechanical properties of friction stir welded AA6061-T4 T-joints, Tianjin Key Laboratory of Advanced Joining Technology, School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.

DOI: 10.18057/ijasc.2015.11.1.2

[9] W. Tang, X Guo, J.C. Mc. CLURE', and L.E. MURR, 1998, Heat Input and Temperature Distribution in Friction Stir welding, Metallurgical and Material Engineering Departement, University of Texas at El paso, El Paso TX 79968 USA.

DOI: 10.17140/vroj-1-102

[10] Ali. Moarrefzadeh, 2012, Study of Heat Affected Zone (HAZ) in FRICTION WELDING PROCESS, Faculty member of Department of MechanicalEngineering, Mahshahr Branch, Islamic Azad University , Mahshahr , Iran E-mail: a_moarrefzadeh@yahoo. com a. moarefzadeh@mahshahriau. ac. ir Tel: [phone].

DOI: 10.33224/rrch.2020.65.3.04

[11] W, Tang, X. Guo, J.C. Mc. Clure and L.E. Murr, 1998, Heat Input and Temperature Distrbution in Friction Stir welding, A. NUNES NASA, Marshall Space Flight Center, Huntsville Alabama USA.