Construction Technology Research on Revolving Conical Pullout Anchor

Abstract:

To solve the anti-float problems of underground buildings (structures) more economically, environmentally and effectively. The paper putted forward a construction technology of revolving conical pullout anchors based on researching and improving to the traditional pullout measures. That was a method that the conical anchor head was installed on the drilling pipe and screwed into the stable soil under the influence of drilling pipe. When pulling the drilling pipe, the fine aggregate concrete were poured into the edge. Furthermore, prestressed anchor cable should be strained which connected with the anchor head to keep a good connect with the beam so that it could improve pullout capacity. The conundrums of long construction period and high cost had effectively solved. This technique also had provided great reference values for the congener construction.

• Periodical: Applied Mechanics and Materials (Volume 858)
• Pages: 10-14
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.858.10
• Online since: November 2016
• Authors: Jun Chao Ma, Cheng Bin Yang, Hong Ming Yu*
• Keywords: Conical Anchor, Pullout Device, Retard-Bonded Prestressed Force, Revolving

References

[1] B. Wang, Exploration and practice of the problem about development and utilization of urban underground space, China University of Geosciences (Beijing) (2013).

[2] Retard-bonded prestressed steel strand (JG/T369-2012), Standards Press of China, (2012).

[3] Sinopec Group for Polyethylene resin (GB/T 11115-2009), Standards Press of China, (2009).

[4] Code for Design of Concrete Structures (GB50010-2010), China Architecture & Building Press (2010).

[5] Code for construction of concrete structures (GB 50666-2011), (2011).