Analysis and Fabrication of a Mechanical Quick-Stop for Research on Chip Formation in Hard Turning Process

Abstract:

Metal cutting is one of the most important machining processes in manufacturing industry. Thorough understanding of metal cutting process facilitates the optimization in selection of cutting tools and machining parameters. There are several methods used for studying phenomena in metal cutting process. Using a quick-top device is an efficient technique for investigation cutting process in which cutting action is stopped so suddenly that the “froze” specimen called the chip root honestly depicts what happened during cutting action. Design strategies of a quick-stop are accelerating cutting tool away from the workpiece or decelerating the workpiece remaining in engagement with the tool. Operation of a quick-stop device can be either mechanically or by explosive. Quick-stop devices can be utilized for various types of machining processes such as: turning, milling, drilling. This paper described the analysis, fabrication, and testing of a quick-stop device which is used for researching on chip formation in hard turning. This device has simple and safe operation which utilizes spring forces to retract the tool from workpiece during cutting. The results of performance at cutting speed of 283 m/min show that the separation distance is quite small, less than 0.2mm so that the deformations on the root chip are close to that while actual machining process. This indicates that the device has satisfied the requirements of an equipment for studying on chip formation.

• Periodical: Applied Mechanics and Materials (Volume 889)
• Pages: 87-94
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.889.87
• Online since: March 2019
• Authors: Nguyen Thi Quoc Dung*
• Keywords: Chip Root, Cutting Tool, Quick-Stop Device, Workpiece

References

[1] T. Worm, Development of a quick-stop device and an analysis of the frozen-chip, technique, Int. J. Mach.Tool Des. Res., Vol. 16 (1976), pp.241-250.

[2] R.H. Brown, A Double shear-pin quick-stop device for very rapid disengagement of a cutting tool, Int. J. Mach. Tool Des. Res. Vol. 16 (1976), pp.115-121.

DOI: 10.1016/0020-7357(76)90029-9

[3] J. Ellis, R. Kirk, G. Barrow, The development of a quick-stop device for metal cutting research, Int. J. Mach. Tool Des. Res. Vol. 9 (1969), pp.321-339.

DOI: 10.1016/0020-7357(69)90007-9

[4] P.K. Phillip, Study of the performance characteristics of an explosive quick-stop device for freezing cutting action, Int. J. Mach. Tool Des. Res, Vol.11 (1971), pp.133-144.

DOI: 10.1016/0020-7357(71)90022-9

[5] J.T. Black, C.R. James, The hammer QSD-quick stop device for high speed machining and rubbing, J. Eng. Ind. 103 (1981) 13–21.

DOI: 10.1115/1.3184455

[6] S.H. Yeo, Woei-Wen Lui and Viet Phung, A quick-stop device for orthogonal machining, Journal of Materials Processing Technology, Vol. 29 (1992), pp.41-46.

DOI: 10.1016/0924-0136(92)90423-p

[7] G.L. Chern, Development of a new and simple quick-stop device for the study on chip formation, International Journal of Machine Tools & Manufacture 45 (2005) p.789–794.

DOI: 10.1016/j.ijmachtools.2004.11.013

[8] S. Amini, M. Lotfi, H. Paktinat, M. Kazemiyoun, Characterization of vibratory turning in cutting zone using a pneumatic quick-stop device, Int. J. Eng. Sci. and Tech., 20 (2017) p.403–410.

DOI: 10.1016/j.jestch.2017.03.003

[9] https://www.vanel.com/_download/compression-eng.pdf.