Elastoplastic Equilibrium of a Hollow Cylinder from an Inhomogeneous Perfectly Plastic Material

Abstract:

The article deals with the axisymmetric elastoplastic problem for a hollow thick-walled cylinder (plane deformed state), loaded from the inside and outside by uniform pressures proportional to one parameter. The material is considered to be perfectly plastic, with the elastic modulus and yield strength generally are arbitrary functions of the radius. In addition, the material is considered to be incompressible in both plastic and elastic zones. On the basis of the criteria for the plasticity of Huber - Mises and Tresca - Saint-Venant, the radius at which the first plastic deformations occur is determined. It is shown that, depending on the functions of the inhomogeneity of elastic and plastic parameters and loads, the occurrence of plastic deformations is possible both on the surfaces and on the inner walls of the cylinder.

• Periodical: Applied Mechanics and Materials (Volume 893)
• Pages: 6-12
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.893.6
• Online since: July 2019
• Authors: Vladimir I. Andreev*
• Keywords: Elasticity, Inhomogeneity, Perfect Plasticity, Plasticity Criteria

References

[1] N. A. Rostovtsev, On the theory of elasticity of inhomogeneous bodies, PMM. 28(4) (1964) 601-611.

[2] V. A. Lomakin, Theory of elasticity of inhomogeneous bodies, Moscow state University, Moscow, (1976).

[3] V. I. Andreev, Some problems and methods of mechanics of inhomogeneous bodies, ASV, Moscow, (2002).

[4] W. Olszak, W. Urbanowski, J. Rychlewski. Elastic-plastic thick-walled inhomogeneous cylinder under the influence of internal pressure and longitudinal force, Arch. Appl. Mech., VII 3 (1955) 315-336.

[5] W. Olszak, W. Urbanowski, Elastic-plastic thick-walled spherical shell under the influence of internal and external pressure, Eng. dissert., IV 1 (1956) 23-41.

[6] V. Olszak, J. Rychlewski, W. Urbanowski, The Theory of plasticity of inhomogeneous bodies, Mir, Moscow, (1964).

[7] V. I. Andreev, E. V. Barmenkova, The modeling of the real building object by using the model of a two-layer beam of variable rigidity, AMM, 204-208 (2012) 3596-3599.

DOI: 10.4028/www.scientific.net/amm.204-208.3596

[8] N. Tsybin, R. Turusov, V. Andreev and A. Kolesnikov, Stress-strain state of a three-layer rod. Comparison of the results of analytical and numerical calculations with the experiment, Matec Web of Conferences, 196 (2018) 01057.

DOI: 10.1051/matecconf/201819601057

[9] V. I. Andreev, About the Unloading in Elastoplastic Inhomogeneous Bodies, Appl. Mech. Mater. 353-356 (2013) 1267-1270.

DOI: 10.4028/www.scientific.net/amm.353-356.1267

[10] V. I. Andreev, Mechanics of inhomogeneous bodies, YURAYT, Moscow, (2015).