Model Experimental Research on Anti-Sliding Characteristics of the Frame Anti-Sliding Piles
Through analysis of model test results, some of the basic sliding piles features of the frame anti-slide pile can be obtained. Under the thrust of landslide, a complex parabola and line function could be used to describe the relationship of load and lateral displacement of pile head. At the same time, there was a big crack in front of the pile. It was shown by monitoring the soil pressure that pushing force acting on the back frame pile was trapezoidal distribution and on the leading frame pile was parabola distribution. The soil pressure value was larger at back piles central and around sliding surface and smaller at the head of piles. the landslide thrust acting on the back piles more larger than the front row piles, the central of piles’ maximum soil pressure minimum 1:3 ratio of the middle pile at the before and after row, the ratio between the changes with the load. Frame pile of the inflection point after another figure appeared, at the top of the link beam and ring beam structure of the entire framework of the pile Showed a synergistic effect of spatial, compare to other forms of single row of piles and others forms, it can significantly reduce the size, to achieve the economic security landslide treatment goal, there is wide application prospect.
T. H. Qian et al., "Model Experimental Research on Anti-Sliding Characteristics of the Frame Anti-Sliding Piles", Applied Mechanics and Materials, Vols. 90-93, pp. 584-587, 2011