Fabrication of the Sheet-Metal Part with Non-Horizontal End Face Based on the CNC Incremental Forming

Hu Zhu; Yi Bo Liu; Jin Ju

doi:10.4028/www.scientific.net/AMR.1004-1005.1152

Paper Titles

Determination of EG Content in the Liquid Products of PET Hydrolysis under Microwave Irradiation
p.1133

Effect of Porosity on Compressive Properities of Porous Titanium with Helical Pores Structure
p.1137

Effect of Process Parameters on Warpage of Printer Board with Metal-Insert
p.1141

Effects of Grain Size on Crack Tip Mechanical Fields of Intergranular Cracking
p.1147

Fabrication of the Sheet-Metal Part with Non-Horizontal End Face Based on the CNC Incremental Forming
p.1152

Forming Process Simulation and Optimization of Nickel-Base Superalloy Turbine Disk
p.1156

Foundry Technique Designing of the Nodular Cast Iron Casting
p.1162

Microscopic Stress Analysis of Body-Centered Cubic Crystal under High Cycle Fatigue
p.1166

Numerical Simulation and Optimization of Low Pressure Die Casting of Aluminum Alloy Cylinder Block
p.1172

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 1004-1005Fabrication of the Sheet-Metal Part with...

Fabrication of the Sheet-Metal Part with Non-Horizontal End Face Based on the CNC Incremental Forming

Abstract:

Aiming at the problem that current CNC incremental forming technology can’t directly manufacture the sheet-metal part with non-horizontal end face, the method that can manufacture this kind of sheet-metal part by using the equidistant tool path parallel to the sheet metal was proposed in this paper, in which the support and sheet metal was made together and sheet metal was directly fixed on the support. In addition, the equidistant tool path parallel to the sheet metal was generated using UG software and the sheet-metal part was fabricated by using vertical CNC machining center.