Design of Equipment Power Remote Control System Based on Ethernet

Abstract:

A network power control system was designed in the paper based on MCU STM32 in order to realize network control to the industrial site power equipment. Software and hardware design scheme of the system were given. STM32F103 chip was used as the main controller in the system and ENC28J60 chip as the Ethernet controller to connect network, the μIP protocol stack was used for network data communication. Network power control test experiment was carried out, the result showed that it can control the equipment power remotely, and can receive real-time information data of the industrial field through Ethernet.Compared with the traditional power control system, this system has the characteristics of intelligence, integration and remote.

• Periodical: Advanced Materials Research (Volume 1037)
• Pages: 278-282
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1037.278
• Online since: October 2014
• Authors: Li Li Mu*, Cheng Guang Xue, Shen Xiang Ni
• Keywords: ENC28J60, Ethernet, STM32F103, μIP

References

[1] Wilson A. The Challenge of Embedded Internet Desigh. Electronic Product Design. (1998).

[2] Yi-kui Liao. The Architecture of Cortex-M3 STM32 Embedded System Design [M]. China Electric Power Press, 2012.

[3] San-qing Wang. Transplantation and Analysis of Embedded Network Protocol of µIP Based on STM32 [D]. Wuhan university of technology, master thesis, 2011.

[4] Xiao-ling Cui, Si-zu Hou , Xuan Zhang . Design and Implementation of the Intelligent Terminal Based on STM32[J]. Telecommunications for Electric Power System, 2012. 10.