Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering

N.M. Rusin; A.L. Skorentsev; E.A. Kolubaev

doi:10.4028/www.scientific.net/AMR.1040.166

Paper Titles

Research of Electromagnetic Properties of Composite Materials on the Basis of MWNTs in Microwave Range
p.142

Role of Micro- and Nanofillers in Abrasive Wear of Composites Based on Ultra-High Molecular Weight Polyethylene
p.148

Sintering of NiO/YSZ Anode Layers for Metal-Supported Solid Oxide Fuel Cell
p.155

Structure and Properties of Multilayered Composite Materials “Nickel - Nickel Aluminide” Obtained Using SPS Method
p.161

Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering
p.166

Study of Tungsten and Molybdenum Nanopowders Interaction with Sulphur in SHS Conditions and Synthesized Product Properties
p.171

Technical and Economical Efficiency for Application of Nanomodified High-Strength Lightweight Concretes
p.176

The Development of Photocatalytic Systems Entitled Titanium Dioxide Nanoparticles Attached to Polypropylene Fibrous Carrier for Freshwater Disinfection
p.183

The Effect of Anisotropy in Polymeric Matrices on Compositional Properties at Various Temperatures
p.188

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1040Structure and Tribotechnical Properties of Al-Sn...

Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering

Abstract:

The structure and tribotechnical properties of sintered Al-Sn alloys were studied. It was pointed that the sintering of pure metals powders allows save the skeleton structure of aluminium matrix at the enlarging concentration of tin up to 50% that twice higher its content in commercial alloys this system. It was established that the high Sn content in sintered alloys leads to their well wear resistance under the dry friction conditions, but it not has an influence on the value of friction coefficient.

You might also be interested in these eBooks

High Technology: Research and Applications

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1040)

Pages:

166-170

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1040.166

Citation:

Cite this paper

Online since:

September 2014

Authors:

N.M. Rusin*, A.L. Skorentsev, E.A. Kolubaev

Keywords:

Antifriction Materials, Dry Friction, Powder metallurgy, Wear Intensity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] N.A. Bushe and al., Bearings from aluminium alloys, 1974, 256p. (in Russian).

Google Scholar

[2] Dr. Eman J. Abed, Study of Solidification and Mechanical Properties of Al-Sn Casting Alloys, Asian Transaction on Engineering, 2, 3 (2012) 89–98.

Google Scholar

[3] N.I. Noskova, N.F. Vil´danova, Y.I. Fillipov and al., Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys, Phys. Met. Metall. 102 (2006) 646-651.

DOI: 10.1134/s0031918x06120131

Google Scholar

[4] U.M. Lahtin, V.P. Leontieva, Materials Science: textbook for higher educational institutions, M.: Mashinostroenie, 1990, 528 (in Russian).

Google Scholar

[5] A.L. Skorentsev, N.M. Rusin, Strengthening mechanism of Al-20Sn alloy at ECAP, Trudy Tomskogo gosudarstvennogo universiteta, 282 (2012) 211-214.

Google Scholar