The Thermographic Measuring of the Surface Temperature of the Peripheral Wall after Removing a Technical Device for Elimination of Reflected Radiation

Jaroslav Solař; Filip Čmiel

doi:10.4028/www.scientific.net/AMR.1122.205

Paper Titles

Single-Sided Nuclear Magnetic Resonance as a Non-Invasive Tool to Evaluate Sprayed Polymer Concrete
p.185

Storage Properties of Water-Solube Salts in Bastion Historical Brick
p.191

Termographical Measurement of the Surface Temperature and Emissivity of Glossy Materials Using the Method of Four Points
p.195

The Effect of Long Term Storage on Properties and Stability of Dry Mixture
p.201

The Thermographic Measuring of the Surface Temperature of the Peripheral Wall after Removing a Technical Device for Elimination of Reflected Radiation
p.205

Thermally-Technical Comparing of Traditional Double Timber Window and Eurowindow
p.210

Thermotechnical Calculation of Air Cavities by Rehabilitation of Wet Brickworks
p.214

Use of Glassy Slag from Biomass Combustion in the Building Industry – Coarse Aggregate
p.219

Use of Separated Dust from the Formatting and Grinding Cement-Bonded Chipboards to Modify their Composition
p.225

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1122The Thermographic Measuring of the Surface...

The Thermographic Measuring of the Surface Temperature of the Peripheral Wall after Removing a Technical Device for Elimination of Reflected Radiation

Abstract:

It is possible to measure the surface temperature of a peripheral wall in a certain point with an advantage when using a technical device for elimination of reflected radiation. Other advantages of the diagnostics of the peripheral wall using the infrared termographic system after removing the mentioned technical device from the wall is, that if we determine (using the technical device) the surface temperature in a determined point, then we are, after inserting it into the termographic systém, able to determine retroactively the real value of the apparent reflected temperature, and this is even done with higher accuracy. Then we use the value for a termographic measuring of all the surface of the peripheral wall, keeping the same angle of scanning.

You might also be interested in these eBooks

Proceedings of the Conference on the Rehabilitation and Reconstruction of Buildings (CRRB 2014)

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1122)

Pages:

205-209

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1122.205

Citation:

Cite this paper

Online since:

August 2015

Authors:

Jaroslav Solař*, Filip Čmiel

Keywords:

Apparent, Elimination, Infrared, Metal, Radiation, Reflected, Shield, Temperature, Thermographic

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Peřina Z., Solař J., Čmiel F., Fabian R., The Elimination of Reflected Radiation in an Infrared Thermographic Measurement in the Exterior, Proceedings of the Conference on the Rehabilitation and Reconstruction of Buildings CRRB 2013 : selected, peer reviewed papers from the conference, November 14-15, 2013, Prague, Czech Republic, Trans Tech Publications, 2014, s. 187-190, ISBN 978-3-03835-083-5.

DOI: 10.4028/www.scientific.net/amr.923.187

Google Scholar

[2] ČSN ISO 18434-1: 2008 Condition monitoring and diagnostics of machines - Thermography - Part 1: General procedures, this standard is the Czech version of the International Standard ISO 18434-1: (2008).

Google Scholar