Technological Aspects Regarding Manual Metal Arc Welding Using Pulsed Current for Fillet Joints Applications

Abstract:

The idea of using electrical pulse current at manual arc welding with coated electrode starts from the observation of frequency influence, unchanging in manual TIG welding with filler materials, on weld pool volume, by partial solidification of the weld pool in base time of the pulse current, thus being able to control its volume.This paper presents for the first time this new challenge of inverter modern sources: manual metal arc welding using pulsed current.Experimental research findings highlight the technological aspects when using pulsed current in manual metal arc welding, using STEL welding equipment that has this option. The application - concerns the establishment the lack of fusion welded joints in fillet positions. It highlights the beneficial effect of pulsed current, in particular by the joint penetration.Experiments have pursued highlighting of welding pulsed current and frequency of the pulses by the appearance of the joint and the influence by weld geometry for lack of fusion fillet joint. Also, the influence of frequency pulsed current by arc stability, sprays, etc. compared with standard welding was observed.

• Periodical: Advanced Materials Research (Volume 1138)
• Pages: 56-61
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1138.56
• Online since: July 2016
• Authors: Mircea Burca*, Aurelian Magda, Ioan Lucaciu
• Keywords: Frequency of Pulse, Manual Metal Arc, Pulsed Current, Weld Penetration

References

[1] M. Burcă., St. Negoitescu, Sudarea MIG/MAG, second edition, Ed. SUDURA, Timişoara, (2004).

[2] Dzelnitzki, D, Killing, R., Sudarea WIG cu impulsuri în diferite domenii de frecvenţă, Revista SUDURA, nr. 2, Timişoara, (2001).

[3] M. Burca, V. Pelecaci, I. Lucaciu, Sudarea manuala cu electrozi inveliti in curent pulsat - o noua provocare a surselor moderne cu invertor, Conferinta ASR SUDURA 2012, Cluj Napoca, (2012).

[4] M. Burca, I. Lucaciu - Oscillography Based Analysis of the Arc Stability in Manual Welding with Coated Electrode in Pulsed Current, Advanced Materials Research, vol 1128 (2015).

DOI: 10.4028/www.scientific.net/amr.1128.209

[5] B. Buddhadev: Enhanced performances of high frequency pulseddirect currentshielded metal arc welding, International Journal of Research in Engineering and Technology eISSN: 2319-1163, Volume: 02 Issue: 12 | Dec-2013, Available @ http: /www. ijret. org 723.

DOI: 10.15623/ijret.2013.0212123

[6] **, STEL, MAX dp 201C, Instruction for use and maintenance.

[7] **  CATALOGUE 2015/2016: Welding machines and accesories- Pico 220 cel puls, pag. 244.