Retracted: Development of Bulk Metallic Glasses and their Composites by Additive Manufacturing – Evolution, Challenges and a Proposed Novel Solution

Retracted due to misconduct of the corresponding author, consisting in providing the article with an inaccurate authorship data, which include persons who have not participated sufficiently to take public responsibility for the contents.

• Periodical: Advanced Materials Research (Volume 1155)
• Pages: 1-28
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.1155.1
• Online since: August 2019
• Authors: Muhammad Musaddique Ali Rafique*, Dong Qiu, Milan Brandt
• Keywords: Additive Manufacture, Bulk Metallic Glass Matrix Composites, Inoculation, Solidification

References

[1] Telford, M., The case for bulk metallic glass. Materials Today, 2004. 7(3): pp.36-43.

[2] Schuh, C.A., T.C. Hufnagel, and U. Ramamurty, Mechanical behavior of amorphous alloys. Acta Materialia, 2007. 55(12): pp.4067-4109.

DOI: 10.1016/j.actamat.2007.01.052

[3] Inoue, A. and A. Takeuchi, Recent development and application products of bulk glassy alloys. Acta Materialia, 2011. 59(6): pp.2243-2267.

DOI: 10.1016/j.actamat.2010.11.027

[4] Klement, W., R.H. Willens, and P.O.L. Duwez, Non-crystalline Structure in Solidified Gold-Silicon Alloys. Nature, 1960. 187(4740): pp.869-870.

DOI: 10.1038/187869b0

[5] Chen, H.S., Thermodynamic considerations on the formation and stability of metallic glasses. Acta Metallurgica, 1974. 22(12): pp.1505-1511.

DOI: 10.1016/0001-6160(74)90112-6

[6] Drehman, A.J., A.L. Greer, and D. Turnbull, Bulk formation of a metallic glass: Pd40Ni40P20. Applied Physics Letters, 1982. 41(8): pp.716-717.

DOI: 10.1063/1.93645

[7] Kui, H.W., A.L. Greer, and D. Turnbull, Formation of bulk metallic glass by fluxing. Applied Physics Letters, 1984. 45(6): pp.615-616.

DOI: 10.1063/1.95330

[8] Wang, W.H., C. Dong, and C.H. Shek, Bulk metallic glasses. Materials Science and Engineering: R: Reports, 2004. 44(2–3): pp.45-89.

DOI: 10.1016/j.mser.2004.03.001

[9] Cheng, Y.Q. and E. Ma, Atomic-level structure and structure–property relationship in metallic glasses. Progress in Materials Science, 2011. 56(4): pp.379-473.

DOI: 10.1016/j.pmatsci.2010.12.002

[10] Qiao, J., H. Jia, and P.K. Liaw, Metallic glass matrix composites. Materials Science and Engineering: R: Reports, 2016. 100: pp.1-69.

DOI: 10.1016/j.mser.2015.12.001

[11] Trexler, M.M. and N.N. Thadhani, Mechanical properties of bulk metallic glasses. Progress in Materials Science, 2010. 55(8): pp.759-839.

DOI: 10.1016/j.pmatsci.2010.04.002

[12] Hays, C.C., C.P. Kim, and W.L. Johnson, Microstructure Controlled Shear Band Pattern Formation and Enhanced Plasticity of Bulk Metallic Glasses Containing \textit{in situ} Formed Ductile Phase Dendrite Dispersions. Physical Review Letters, 2000. 84(13): pp.2901-2904.

DOI: 10.1103/physrevlett.84.2901

[13] Hofmann, D.C., et al., Designing metallic glass matrix composites with high toughness and tensile ductility. Nature, 2008. 451(7182): pp.1085-1089.

DOI: 10.1038/nature06598

[14] Hofmann, D.C., Shape Memory Bulk Metallic Glass Composites. Science, 2010. 329(5997): pp.1294-1295.

DOI: 10.1126/science.1193522

[15] Wu, Y., et al., Designing Bulk Metallic Glass Composites with Enhanced Formability and Plasticity. Journal of Materials Science & Technology, 2014. 30(6): pp.566-575.

DOI: 10.1016/j.jmst.2014.03.028

[16] Guo, H., et al., Tensile ductility and necking of metallic glass. Nat Mater, 2007. 6(10): pp.735-739.

[17] Jang, D. and J.R. Greer, Transition from a strong-yet-brittle to a stronger-and-ductile state by size reduction of metallic glasses. Nat Mater, 2010. 9(3): pp.215-219.

DOI: 10.1038/nmat2622

[18] Choi—Yim, H., Synthesis and Characterization of Bulk Metallic Glass Matrix Composites. 1998, California Institute of Technology.

[19] Choi-Yim, H., et al., Processing, microstructure and properties of ductile metal particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites. Acta Materialia, 2002. 50(10): pp.2737-2745.

DOI: 10.1016/s1359-6454(02)00113-1

[20] Lee, M.L., Y. Li, and C.A. Schuh, Effect of a controlled volume fraction of dendritic phases on tensile and compressive ductility in La-based metallic glass matrix composites. Acta Materialia, 2004. 52(14): pp.4121-4131.

DOI: 10.1016/j.actamat.2004.05.025

[21] Pauly, S., et al., Transformation-mediated ductility in CuZr-based bulk metallic glasses. Nat Mater, 2010. 9(6): pp.473-477.

DOI: 10.1038/nmat2767

[22] Wu, Y., et al., Bulk Metallic Glass Composites with Transformation-Mediated Work-Hardening and Ductility. Advanced Materials, 2010. 22(25): pp.2770-2773.

DOI: 10.1002/adma.201000482

[23] Song, K.K., et al., Triple yielding and deformation mechanisms in metastable Cu47.5Zr47.5Al5 composites. Acta Materialia, 2012. 60(17): pp.6000-6012.

DOI: 10.1016/j.actamat.2012.07.015

[24] Wu, D.Y., et al., Glass-forming ability, thermal stability of B2 CuZr phase, and crystallization kinetics for rapidly solidified Cu–Zr–Zn alloys. Journal of Alloys and Compounds, 2016. 664: pp.99-108.

DOI: 10.1016/j.jallcom.2015.12.187

[25] Kim, C.P., et al., Realization of high tensile ductility in a bulk metallic glass composite by the utilization of deformation-induced martensitic transformation. Scripta Materialia, 2011. 65(4): pp.304-307.

DOI: 10.1016/j.scriptamat.2011.04.037

[26] Gao, W.-h., et al., Effects of Co and Al addition on martensitic transformation and microstructure in ZrCu-based shape memory alloys. Transactions of Nonferrous Metals Society of China, 2015. 25(3): pp.850-855.

DOI: 10.1016/s1003-6326(15)63673-1

[27] Zhai, H., H. Wang, and F. Liu, A strategy for designing bulk metallic glass composites with excellent work-hardening and large tensile ductility. Journal of Alloys and Compounds, 2016. 685: pp.322-330.

DOI: 10.1016/j.jallcom.2016.05.290

[28] Song, W., et al., Microstructural Control via Copious Nucleation Manipulated by In Situ Formed Nucleants: Large-Sized and Ductile Metallic Glass Composites. Advanced Materials, 2016: p. n/a-n/a.

DOI: 10.1002/adma.201601954

[29] Pekarskaya, E., C.P. Kim, and W.L. Johnson, In situ transmission electron microscopy studies of shear bands in a bulk metallic glass based composite. Journal of Materials Research, 2001. 16(09): pp.2513-2518.

DOI: 10.1557/jmr.2001.0344

[30] Zhang, Q., Haifeng Zhang, Zhengwang Zhu, Zhuangqi Hu, Formation of High Strength In-situ Bulk Metallic Glass Composite with Enhanced Plasticity in Cu50Zr47:5Ti2:5 Alloy. Materials Transactions, 2005. 46(3): pp.730-733.

DOI: 10.2320/matertrans.46.730

[31] Zhu, Z., et al., Ta-particulate reinforced Zr-based bulk metallic glass matrix composite with tensile plasticity. Scripta Materialia, 2010. 62(5): pp.278-281.

DOI: 10.1016/j.scriptamat.2009.11.018

[32] Fan, C., R.T. Ott, and T.C. Hufnagel, Metallic glass matrix composite with precipitated ductile reinforcement. Applied Physics Letters, 2002. 81(6): pp.1020-1022.

DOI: 10.1063/1.1498864

[33] Hu, X., et al., Glass forming ability and in-situ composite formation in Pd-based bulk metallic glasses. Acta Materialia, 2003. 51(2): pp.561-572.

DOI: 10.1016/s1359-6454(02)00438-x

[34] Cheng, J.-L., et al., Innovative approach to the design of low-cost Zr-based BMG composites with good glass formation. Scientific Reports, 2013. 3: p. (2097).

DOI: 10.1038/srep02097

[35] Wu, F.F., et al., Effect of annealing on the mechanical properties and fracture mechanisms of a ${\mathrm{Zr}}_{56.2}{\mathrm{Ti}}_{13.8} {\mathrm{Nb}}_{5.0} {\mathrm{Cu}}_{6.9}{\mathrm{Ni}}_{5.6}{\mathrm{Be}}_{12.5}$ bulk-metallic-glass composite. Physical Review B, 2007. 75(13): p.134201.

DOI: 10.1109/iciprm.2019.8819254

[36] Chen, H.S., Ductile-brittle transition in metallic glasses. Materials Science and Engineering, 1976. 26(1): pp.79-82.

DOI: 10.1016/0025-5416(76)90228-7

[37] Antonione, C., et al., Phase separation in multicomponent amorphous alloys. Journal of Non-Crystalline Solids, 1998. 232–234: pp.127-132.

DOI: 10.1016/s0022-3093(98)00486-4

[38] Fan, C., C. Li, and A. Inoue, Nanocrystal composites in Zr–Nb–Cu–Al metallic glasses. Journal of Non-Crystalline Solids, 2000. 270(1–3): pp.28-33.

DOI: 10.1016/s0022-3093(00)00078-8

[39] Fan, C. and A. Inoue, Ductility of bulk nanocrystalline composites and metallic glasses at room temperature. Applied Physics Letters, 2000. 77(1): pp.46-48.

DOI: 10.1063/1.126872

[40] Basu, J., et al., Microstructure and mechanical properties of a partially crystallized La-based bulk metallic glass. Philosophical Magazine, 2003. 83(15): pp.1747-1760.

DOI: 10.1080/0141861861031000104163

[41] Fan, C., et al., Properties of as-cast and structurally relaxed Zr-based bulk metallic glasses. Journal of Non-Crystalline Solids, 2006. 352(2): pp.174-179.

DOI: 10.1016/j.jnoncrysol.2005.11.016

[42] Gu, J., et al., Effects of annealing on the hardness and elastic modulus of a Cu36Zr48Al8Ag8 bulk metallic glass. Materials & Design, 2013. 47: pp.706-710.

DOI: 10.1016/j.matdes.2012.12.071

[43] Tan, J., et al., Correlation between Internal States and Strength in Bulk Metallic Glass, in PRICM. 2013, John Wiley & Sons, Inc. pp.3199-3206.

DOI: 10.1002/9781118792148.ch394

[44] Krämer, L., et al., Production of Bulk Metallic Glasses by Severe Plastic Deformation. Metals, 2015. 5(2): p.720.

[45] Nishiyama, N., et al., The world's biggest glassy alloy ever made. Intermetallics, 2012. 30: pp.19-24.

DOI: 10.1016/j.intermet.2012.03.020

[46] Inoue, A., N. Nishiyama, and T. Matsuda, Preparation of Bulk Glassy Pd<SUB>40</SUB>Ni<SUB>10</SUB>Cu<SUB>30</SUB>P<SUB>20</SUB> Alloy of 40 mm in Diameter by Water Quenching. Materials Transactions, JIM, 1996. 37(2): pp.181-184.

DOI: 10.2320/matertrans1989.37.181

[47] He, Y., R.B. Schwarz, and J.I. Archuleta, Bulk glass formation in the Pd–Ni–P system. Applied Physics Letters, 1996. 69(13): pp.1861-1863.

DOI: 10.1063/1.117458

[48] Inoue, A., T. Zhang, and T. Masumoto, Zr&ndash;Al&ndash;Ni Amorphous Alloys with High Glass Transition Temperature and Significant Supercooled Liquid Region. Materials Transactions, JIM, 1990. 31(3): pp.177-183.

DOI: 10.2320/matertrans1989.31.177

[49] Peker, A. and W.L. Johnson, A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5. Applied Physics Letters, 1993. 63(17): pp.2342-2344.

DOI: 10.1063/1.110520

[50] Tan, J., et al., Study of mechanical property and crystallization of a ZrCoAl bulk metallic glass. Intermetallics, 2011. 19(4): pp.567-571.

DOI: 10.1016/j.intermet.2010.12.006

[51] Biffi, C.A., A. Figini Albisetti, and A. Tuissi. CuZr based shape memory alloys: effect of Cr and Co on the martensitic transformation. in Materials Science Forum. 2013. Trans Tech Publ.

DOI: 10.4028/www.scientific.net/msf.738-739.167

[52] Cheng, J.L. and G. Chen, Glass formation of Zr–Cu–Ni–Al bulk metallic glasses correlated with L → Zr2Cu + ZrCu pseudo binary eutectic reaction. Journal of Alloys and Compounds, 2013. 577: pp.451-455.

DOI: 10.1016/j.jallcom.2013.06.126

[53] Chen, G., et al., Enhanced plasticity in a Zr-based bulk metallic glass composite with in situ formed intermetallic phases. Applied Physics Letters, 2009. 95(8): p.081908.

DOI: 10.1063/1.3211912

[54] Jeon, C., et al., Effects of Effective Dendrite Size on Tensile Deformation Behavior in Ti-Based Dendrite-Containing Amorphous Matrix Composites Modified from Ti-6Al-4V Alloy. Metallurgical and Materials Transactions A, 2015. 46(1): pp.235-250.

DOI: 10.1007/s11661-014-2531-7

[55] Chu, M.Y., et al., Quasi-static and dynamic deformation behaviors of an in-situ Ti-based metallic glass matrix composite. Journal of Alloys and Compounds, 2015. 640: pp.305-310.

DOI: 10.1016/j.jallcom.2015.03.253

[56] Wang, Y.S., et al., The role of the interface in a Ti-based metallic glass matrix composite with in situ dendrite reinforcement. Surface and Interface Analysis, 2014. 46(5): pp.293-296.

DOI: 10.1002/sia.5413

[57] Gibson, I., W.D. Rosen, and B. Stucker, Development of Additive Manufacturing Technology, in Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. 2010, Springer US: Boston, MA. pp.36-58.

DOI: 10.1007/978-1-4419-1120-9_2

[58] Spears, T.G. and S.A. Gold, In-process sensing in selective laser melting (SLM) additive manufacturing. Integrating Materials and Manufacturing Innovation, 2016. 5(1): pp.1-25.

DOI: 10.1186/s40192-016-0045-4

[59] Pauly, S., et al., Processing metallic glasses by selective laser melting. Materials Today, 2013. 16(1–2): pp.37-41.

DOI: 10.1016/j.mattod.2013.01.018

[60] Schroers, J., Processing of Bulk Metallic Glass. Advanced Materials, 2010. 22(14): pp.1566-1597.

DOI: 10.1002/adma.200902776

[61] Li, X.P., et al., Selective laser melting of Zr-based bulk metallic glasses: Processing, microstructure and mechanical properties. Materials & Design, 2016. 112: pp.217-226.

DOI: 10.1016/j.matdes.2016.09.071

[62] Zheng, B., et al., Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping. Metallurgical and Materials Transactions A, 2009. 40(5): pp.1235-1245.

DOI: 10.1007/s11661-009-9828-y

[63] Olakanmi, E.O., R.F. Cochrane, and K.W. Dalgarno, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties. Progress in Materials Science, 2015. 74: pp.401-477.

DOI: 10.1016/j.pmatsci.2015.03.002

[64] Buchbinder, D., et al., High Power Selective Laser Melting (HP SLM) of Aluminum Parts. Physics Procedia, 2011. 12: pp.271-278.

DOI: 10.1016/j.phpro.2011.03.035

[65] Li, Y. and D. Gu, Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study. Additive Manufacturing, 2014. 1–4: pp.99-109.

DOI: 10.1016/j.addma.2014.09.001

[66] Yap, C.Y., et al., Review of selective laser melting: Materials and applications. Applied Physics Reviews, 2015. 2(4): p.041101.

[67] Romano, J., et al., Temperature distribution and melt geometry in laser and electron-beam melting processes – A comparison among common materials. Additive Manufacturing, 2015. 8: pp.1-11.

DOI: 10.1016/j.addma.2015.07.003

[68] Sun, H. and K.M. Flores, Microstructural Analysis of a Laser-Processed Zr-Based Bulk Metallic Glass. Metallurgical and Materials Transactions A, 2010. 41(7): pp.1752-1757.

DOI: 10.1007/s11661-009-0151-4

[69] Yang, G., et al., Laser solid forming Zr-based bulk metallic glass. Intermetallics, 2012. 22: pp.110-115.

DOI: 10.1016/j.intermet.2011.10.008

[70] Zhang, Y., et al., Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming. Intermetallics, 2015. 66: pp.22-30.

DOI: 10.1016/j.intermet.2015.06.007

[71] Frazier, W.E., Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance, 2014. 23(6): pp.1917-1928.

[72] Wong, K.V. and A. Hernandez, A Review of Additive Manufacturing. ISRN Mechanical Engineering, 2012. 2012: p.10.

[73] Travitzky, N., et al., Additive Manufacturing of Ceramic-Based Materials. Advanced Engineering Materials, 2014. 16(6): pp.729-754.

DOI: 10.1002/adem.201400097

[74] Baufeld, B., E. Brandl, and O. van der Biest, Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition. Journal of Materials Processing Technology, 2011. 211(6): pp.1146-1158.

DOI: 10.1016/j.jmatprotec.2011.01.018

[75] Chen, Y., C. Zhou, and J. Lao, A layerless additive manufacturing process based on CNC accumulation. Rapid Prototyping Journal, 2011. 17(3): pp.218-227.

DOI: 10.1108/13552541111124806

[76] Kawahito, Y., et al., High-power fiber laser welding and its application to metallic glass Zr55Al10Ni5Cu30. Materials Science and Engineering: B, 2008. 148(1–3): pp.105-109.

DOI: 10.1016/j.mseb.2007.09.062

[77] Kim, J.H., et al., Pulsed Nd:YAG laser welding of Cu54Ni6Zr22Ti18 bulk metallic glass. Materials Science and Engineering: A, 2007. 449–451: pp.872-875.

DOI: 10.1016/j.msea.2006.02.323

[78] Li, B., et al., Laser welding of Zr45Cu48Al7 bulk glassy alloy. Journal of Alloys and Compounds, 2006. 413(1–2): pp.118-121.

DOI: 10.1016/j.jallcom.2005.07.005

[79] Wang, G., et al., Laser welding of Ti40Zr25Ni3Cu12Be20 bulk metallic glass. Materials Science and Engineering: A, 2012. 541: pp.33-37.

DOI: 10.1016/j.msea.2012.01.114

[80] Wang, H.S., et al., Combination of a Nd:YAG laser and a liquid cooling device to (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass welding. Materials Science and Engineering: A, 2010. 528(1): pp.338-341.

DOI: 10.1016/j.msea.2010.09.014

[81] Wang, H.-S., et al., The effects of initial welding temperature and welding parameters on the crystallization behaviors of laser spot welded Zr-based bulk metallic glass. Materials Chemistry and Physics, 2011. 129(1): pp.547-552.

DOI: 10.1016/j.matchemphys.2011.04.067

[82] Acharya, R. and S. Das, Additive Manufacturing of IN100 Superalloy Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair: Process Development, Modeling, Microstructural Characterization, and Process Control. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 2015. 46a(9): pp.3864-3875.

DOI: 10.1007/s11661-015-2912-6

[83] Sames, W.J., et al., The metallurgy and processing science of metal additive manufacturing. International Materials Reviews, 2016. 61(5): pp.315-360.

[84] Harooni, A., et al., Processing window development for laser cladding of zirconium on zirconium alloy. Journal of Materials Processing Technology, 2016. 230: pp.263-271.

DOI: 10.1016/j.jmatprotec.2015.11.028

[85] Wu, X. and Y. Hong, Fe-based thick amorphous-alloy coating by laser cladding. Surface and Coatings Technology, 2001. 141(2–3): pp.141-144.

DOI: 10.1016/s0257-8972(01)01263-4

[86] Wu, X., B. Xu, and Y. Hong, Synthesis of thick Ni66Cr5Mo4Zr6P15B4 amorphous alloy coating and large glass-forming ability by laser cladding. Materials Letters, 2002. 56(5): pp.838-841.

DOI: 10.1016/s0167-577x(02)00624-9

[87] Yue, T.M. and Y.P. Su, Laser cladding of SiC reinforced Zr65Al7.5Ni10Cu17.5 amorphous coating on magnesium substrate. Applied Surface Science, 2008. 255(5, Part 1): pp.1692-1698.

DOI: 10.1016/j.apsusc.2008.06.036

[88] Yue, T.M., Y.P. Su, and H.O. Yang, Laser cladding of Zr65Al7.5Ni10Cu17.5 amorphous alloy on magnesium. Materials Letters, 2007. 61(1): pp.209-212.

DOI: 10.1016/j.matlet.2006.04.033

[89] Zhang, P., et al., Synthesis of Fe–Ni–B–Si–Nb amorphous and crystalline composite coatings by laser cladding and remelting. Surface and Coatings Technology, 2011. 206(6): pp.1229-1236.

DOI: 10.1016/j.surfcoat.2011.08.039

[90] Zhu, Q., et al., Synthesis of Fe-based amorphous composite coatings with low purity materials by laser cladding. Applied Surface Science, 2007. 253(17): pp.7060-7064.

DOI: 10.1016/j.apsusc.2007.02.055

[91] Lan, S., et al., Structural crossover in a supercooled metallic liquid and the link to a liquid-to-liquid phase transition. Applied Physics Letters, 2016. 108(21): p.211907.

DOI: 10.1063/1.4952724

[92] Zu, F.-Q., Temperature-Induced Liquid-Liquid Transition in Metallic Melts: A Brief Review on the New Physical Phenomenon. Metals, 2015. 5(1): p.395.

DOI: 10.3390/met5010395

[93] Wei, S., et al., Liquid–liquid transition in a strong bulk metallic glass-forming liquid. Nat Commun, 2013. 4.

DOI: 10.1038/ncomms3083

[94] Song, K.K., et al., Strategy for pinpointing the formation of B2 CuZr in metastable CuZr-based shape memory alloys. Acta Materialia, 2011. 59(17): pp.6620-6630.

DOI: 10.1016/j.actamat.2011.07.017

[95] Wu, Y., et al., Formation of Cu–Zr–Al bulk metallic glass composites with improved tensile properties. Acta Materialia, 2011. 59(8): pp.2928-2936.

DOI: 10.1016/j.actamat.2011.01.029

[96] Song, K.K., et al., Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites. Materials Science and Engineering: A, 2013. 559(Supplement C): pp.711-718.

DOI: 10.1016/j.msea.2012.09.013

[97] Liu, Z., et al., Pronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment. AIP Advances, 2012. 2(3): p.032176.

DOI: 10.1063/1.4754853

[98] Liu, Z., et al., Microstructural tailoring and improvement of mechanical properties in CuZr-based bulk metallic glass composites. Acta Materialia, 2012. 60(6): pp.3128-3139.

DOI: 10.1016/j.actamat.2012.02.017

[99] Song, K.K., et al., Effect of TaW particles on the microstructure and mechanical properties of metastable Cu47.5Zr47.5Al5 alloys. Materials Science and Engineering: A, 2013. 587(Supplement C): pp.372-380.

DOI: 10.1016/j.msea.2013.09.010

[100] Liu, Z.Q., H. Wang, and T. Zhang, Bulk metallic glass composites ductilized by core–shell structured dual crystalline phases through controlled inoculation. Intermetallics, 2014. 45(Supplement C): pp.24-28.

DOI: 10.1016/j.intermet.2013.09.013

[101] Kelly, P.M. and M.-X. Zhang, Edge-to-edge matching—The fundamentals. Metallurgical and Materials Transactions A, 2006. 37(3): pp.833-839.

DOI: 10.1007/s11661-006-0056-4

[102] Kelly, P. and M.-X. Zhang. Edge-to-edge matching-a new approach to the morphology and crystallography of precipitates. in Materials Forum. (1999).

[103] Taylor, H.F., Foundry engineering. 1959: Wiley.

[104] Heine, R.W., C.R. Loper, and P.C. Rosenthal, Principles of Metal Casting. 1955: McGraw-Hill.

[105] Flemings, M.C., Solidification Processing. 1974: McGraw-Hill.

[106] Greer, A.L., Metallic Glasses. Science, 1995. 267(5206): pp.1947-1953.

[107] Güntherodt, H.J., Metallic glasses, in Festkörperprobleme 17: Plenary Lectures of the Divisions Semiconductor Physics" "Metal Physics" "Low Temperature Physics" "Thermodynamics and Statistical Physics" "Crystallography" "Magnetism" "Surface Physics, of the German Physical Society Münster, March 7–12, 1977, J. Treusch, Editor. 1977, Springer Berlin Heidelberg: Berlin, Heidelberg. pp.25-53.

DOI: 10.1007/bfb0108599

[108] Inoue, A., High Strength Bulk Amorphous Alloys with Low Critical Cooling Rates (<I>Overview</I>). Materials Transactions, JIM, 1995. 36(7): pp.866-875.

DOI: 10.2320/matertrans1989.36.866

[109] Johnson, W.L., Bulk Glass-Forming Metallic Alloys: Science and Technology. MRS Bulletin, 1999. 24(10): pp.42-56.

DOI: 10.1557/s0883769400053252

[110] Matthieu, M., Relaxation and physical aging in network glasses: a review. Reports on Progress in Physics, 2016. 79(6): p.066504.

[111] Hofmann, D.C. and W.L. Johnson. Improving Ductility in Nanostructured Materials and Metallic Glasses:Three Laws,. in Materials Science Forum. 2010. Trans Tech Publ.

DOI: 10.4028/www.scientific.net/msf.633-634.657

[112] Shi, Y. and M.L. Falk, Does metallic glass have a backbone? The role of percolating short range order in strength and failure. Scripta Materialia, 2006. 54(3): pp.381-386.

DOI: 10.1016/j.scriptamat.2005.09.053

[113] Mattern, N., et al., Short-range order of Cu–Zr metallic glasses. Journal of Alloys and Compounds, 2009. 485(1–2): pp.163-169.

DOI: 10.1016/j.jallcom.2009.05.111

[114] Jiang, M.Q. and L.H. Dai, Short-range-order effects on intrinsic plasticity of metallic glasses. Philosophical Magazine Letters, 2010. 90(4): pp.269-277.

DOI: 10.1080/09500831003630781

[115] Zhang, F., et al., Composition-dependent stability of the medium-range order responsible for metallic glass formation. Acta Materialia, 2014. 81: pp.337-344.

DOI: 10.1016/j.actamat.2014.08.041

[116] Sheng, H.W., et al., Atomic packing and short-to-medium-range order in metallic glasses. Nature, 2006. 439(7075): pp.419-425.

DOI: 10.1038/nature04421

[117] Cheng, Y.Q., E. Ma, and H.W. Sheng, Atomic Level Structure in Multicomponent Bulk Metallic Glass. Physical Review Letters, 2009. 102(24): p.245501.

DOI: 10.1103/physrevlett.102.245501

[118] Nelson, D.R., Order, frustration, and defects in liquids and glasses. Physical Review B, 1983. 28(10): pp.5515-5535.

DOI: 10.1103/physrevb.28.5515

[119] Ma, E., Tuning order in disorder. Nat Mater, 2015. 14(6): pp.547-552.

[120] Greer, A.L., Confusion by design. Nature, 1993. 366(6453): pp.303-304.

[121] Guo, S.F., et al., Fe-based bulk metallic glasses: Brittle or ductile? Applied Physics Letters, 2014. 105(16): p.161901.

DOI: 10.1063/1.4899124

[122] Gu, X.J., S.J. Poon, and G.J. Shiflet, Mechanical properties of iron-based bulk metallic glasses. Journal of Materials Research, 2007. 22(2): pp.344-351.

DOI: 10.1557/jmr.2007.0036

[123] Xi, X.K., et al., Fracture of Brittle Metallic Glasses: Brittleness or Plasticity. Physical Review Letters, 2005. 94(12): p.125510.

[124] Chen, T.-H. and C.-K. Tsai, The Microstructural Evolution and Mechanical Properties of Zr-Based Metallic Glass under Different Strain Rate Compressions. Materials, 2015. 8(4): p.1831.

DOI: 10.3390/ma8041831

[125] Xue, Y.F., et al., Deformation and failure behavior of a hydrostatically extruded Zr38Ti17Cu10.5Co12Be22.5 bulk metallic glass/porous tungsten phase composite under dynamic compression. Composites Science and Technology, 2008. 68(15–16): pp.3396-3400.

DOI: 10.1016/j.compscitech.2008.09.026

[126] Chen, H.S., Plastic flow in metallic glasses under compression. Scripta Metallurgica, 1973. 7(9): pp.931-935.

DOI: 10.1016/0036-9748(73)90143-9

[127] Flores, K.M. and R.H. Dauskardt, Fracture and deformation of bulk metallic glasses and their composites. Intermetallics, 2004. 12(7–9): pp.1025-1029.

DOI: 10.1016/j.intermet.2004.05.004

[128] Lowhaphandu, P. and J.J. Lewandowski, Fracture toughness and notched toughness of bulk amorphous alloy: Zr-Ti-Ni-Cu-Be. Scripta Materialia, 1998. 38(12): pp.1811-1817.

DOI: 10.1016/s1359-6462(98)00102-x

[129] Lowhaphandu, P., et al., Deformation and fracture toughness of a bulk amorphous Zr–Ti–Ni–Cu–Be alloy. Intermetallics, 2000. 8(5–6): pp.487-492.

DOI: 10.1016/s0966-9795(99)00137-5

[130] Conner, R.D., et al., Fracture toughness determination for a beryllium-bearing bulk metallic glass. Scripta Materialia, 1997. 37(9): pp.1373-1378.

DOI: 10.1016/s1359-6462(97)00250-9

[131] Gilbert, C.J., R.O. Ritchie, and W.L. Johnson, Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass. Applied Physics Letters, 1997. 71(4): pp.476-478.

DOI: 10.1063/1.119610

[132] Xu, J., U. Ramamurty, and E. Ma, The fracture toughness of bulk metallic glasses. JOM, 2010. 62(4): pp.10-18.

DOI: 10.1007/s11837-010-0052-4

[133] Kimura, H. and T. Masumoto, Fracture toughness of amorphous metals. Scripta Metallurgica, 1975. 9(3): pp.211-221.

DOI: 10.1016/0036-9748(75)90196-9

[134] Chen, M., Mechanical Behavior of Metallic Glasses: Microscopic Understanding of Strength and Ductility. Annual Review of Materials Research, 2008. 38(1): pp.445-469.

DOI: 10.1146/annurev.matsci.38.060407.130226

[135] Hufnagel, T.C., C.A. Schuh, and M.L. Falk, Deformation of metallic glasses: Recent developments in theory, simulations, and experiments. Acta Materialia, 2016. 109: pp.375-393.

DOI: 10.1016/j.actamat.2016.01.049

[136] Sarac, B. and J. Schroers, Designing tensile ductility in metallic glasses. Nature Communications, 2013. 4: p.2158.

DOI: 10.1038/ncomms3158

[137] Ritchie, R.O., The conflicts between strength and toughness. Nat Mater, 2011. 10(11): pp.817-822.

[138] Wada, T., A. Inoue, and A.L. Greer, Enhancement of room-temperature plasticity in a bulk metallic glass by finely dispersed porosity. Applied Physics Letters, 2005. 86(25): p.251907.

DOI: 10.1063/1.1953884

[139] Donovan, P.E. and W.M. Stobbs, Shear band interactions with crystals in partially crystallised metallic glasses. Journal of Non-Crystalline Solids, 1983. 55(1): pp.61-76.

DOI: 10.1016/0022-3093(83)90007-8

[140] Leng, Y. and T.H. Courtney, Multiple shear band formation in metallic glasses in composites. Journal of Materials Science, 1991. 26(3): pp.588-592.

DOI: 10.1007/bf00588291

[141] Liu, L.F., et al., Behavior of multiple shear bands in Zr-based bulk metallic glass. Materials Chemistry and Physics, 2005. 93(1): pp.174-177.

DOI: 10.1016/j.matchemphys.2005.03.011

[142] Huang, R., et al., Inhomogeneous deformation in metallic glasses. Journal of the Mechanics and Physics of Solids, 2002. 50(5): pp.1011-1027.

[143] Spaepen, F., A microscopic mechanism for steady state inhomogeneous flow in metallic glasses. Acta Metallurgica, 1977. 25(4): pp.407-415.

DOI: 10.1016/0001-6160(77)90232-2

[144] Steif, P.S., F. Spaepen, and J.W. Hutchinson, Strain localization in amorphous metals. Acta Metallurgica, 1982. 30(2): pp.447-455.

DOI: 10.1016/0001-6160(82)90225-5

[145] Flores, K.M., Structural changes and stress state effects during inhomogeneous flow of metallic glasses. Scripta Materialia, 2006. 54(3): pp.327-332.

DOI: 10.1016/j.scriptamat.2005.04.049

[146] Donovan, P.E. and W.M. Stobbs, The structure of shear bands in metallic glasses. Acta Metallurgica, 1981. 29(8): pp.1419-1436.

DOI: 10.1016/0001-6160(81)90177-2

[147] Li, N., W. Chen, and L. Liu, Thermoplastic Micro-Forming of Bulk Metallic Glasses: A Review. JOM, 2016. 68(4): pp.1246-1261.

DOI: 10.1007/s11837-016-1844-y

[148] Sarac, B., et al., Three-Dimensional Shell Fabrication Using Blow Molding of Bulk Metallic Glass. Journal of Microelectromechanical Systems, 2011. 20(1): pp.28-36.

DOI: 10.1109/jmems.2010.2090495

[149] Schroers, J., The superplastic forming of bulk metallic glasses. JOM, 2005. 57(5): pp.35-39.

DOI: 10.1007/s11837-005-0093-2

[150] Dandliker, R.B., R.D. Conner, and W.L. Johnson, Melt infiltration casting of bulk metallic-glass matrix composites. Journal of Materials Research, 1998. 13(10): pp.2896-2901.

DOI: 10.1557/jmr.1998.0396

[151] Jiang, Y. and K. Qiu, Computational micromechanics analysis of toughening mechanisms of particle-reinforced bulk metallic glass composites. Materials & Design (1980-2015), 2015. 65: pp.410-416.

DOI: 10.1016/j.matdes.2014.09.013

[152] Sun, Y.F., et al., Formation, thermal stability and deformation behavior of graphite-flakes reinforced Cu-based bulk metallic glass matrix composites. Materials Science and Engineering: A, 2006. 435–436: pp.132-138.

DOI: 10.1016/j.msea.2006.07.040

[153] Conner, R.D., R.B. Dandliker, and W.L. Johnson, Mechanical properties of tungsten and steel fiber reinforced Zr41.25Ti13.75Cu12.5Ni10Be22.5 metallic glass matrix composites. Acta Materialia, 1998. 46(17): pp.6089-6102.

DOI: 10.1016/s1359-6454(98)00275-4

[154] Lee, K., et al., Direct observation of microfracture process in metallic-continuous-fiber-reinforced amorphous matrix composites fabricated by liquid pressing process. Materials Science and Engineering: A, 2010. 527(4–5): pp.941-946.

DOI: 10.1016/j.msea.2009.09.065

[155] Wadhwa, P., J. Heinrich, and R. Busch, Processing of copper fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites. Scripta Materialia, 2007. 56(1): pp.73-76.

DOI: 10.1016/j.scriptamat.2006.08.053

[156] Cytron, S.J., A metallic glass-metal matrix composite. Journal of Materials Science Letters, 1982. 1(5): pp.211-213.

[157] Deng, S.T., et al., Metallic glass fiber-reinforced Zr-based bulk metallic glass. Scripta Materialia, 2011. 64(1): pp.85-88.

DOI: 10.1016/j.scriptamat.2010.09.014

[158] Wang, Z., et al., Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites. Scientific Reports, 2016. 6: p.24384.

[159] Jiang, J.-Z., et al., Low-Density High-Strength Bulk Metallic Glasses and Their Composites: A Review. Advanced Engineering Materials, 2015. 17(6): pp.761-780.

DOI: 10.1002/adem.201400252

[160] Qiao, J., In-situ Dendrite/Metallic Glass Matrix Composites: A Review. Journal of Materials Science & Technology, 2013. 29(8): pp.685-701.

DOI: 10.1016/j.jmst.2013.05.020

[161] Freed, R.L. and J.B. Vander Sande, The effects of devitrification on the mechanical properties of Cu46Zr54 metallic glass. Metallurgical Transactions A, 1979. 10(11): pp.1621-1626.

DOI: 10.1007/bf02811693

[162] Akhtar, D. and R.D.K. Misra, Effect of thermal relaxation on diffusion in a metallic glass. Scripta Metallurgica, 1986. 20(5): pp.627-631.

DOI: 10.1016/0036-9748(86)90479-5

[163] Liu, C., E. Pineda, and D. Crespo, Mechanical Relaxation of Metallic Glasses: An Overview of Experimental Data and Theoretical Models. Metals, 2015. 5(2): p.1073.

DOI: 10.3390/met5021073

[164] Qiao, J.C. and J.M. Pelletier, Dynamic Mechanical Relaxation in Bulk Metallic Glasses: A Review. Journal of Materials Science & Technology, 2014. 30(6): pp.523-545.

DOI: 10.1016/j.jmst.2014.04.018

[165] Taub, A.I. and F. Spaepen, The kinetics of structural relaxation of a metallic glass. Acta Metallurgica, 1980. 28(12): pp.1781-1788.

DOI: 10.1016/0001-6160(80)90031-0

[166] Greer, A.L., Y.Q. Cheng, and E. Ma, Shear bands in metallic glasses. Materials Science and Engineering: R: Reports, 2013. 74(4): pp.71-132.

DOI: 10.1016/j.mser.2013.04.001

[167] Gludovatz, B., et al., Size-dependent fracture toughness of bulk metallic glasses. Acta Materialia, 2014. 70: pp.198-207.

DOI: 10.1016/j.actamat.2014.01.062

[168] Ogata, S., et al., Atomistic simulation of shear localization in Cu–Zr bulk metallic glass. Intermetallics, 2006. 14(8–9): pp.1033-1037.

DOI: 10.1016/j.intermet.2006.01.022

[169] Packard, C.E. and C.A. Schuh, Initiation of shear bands near a stress concentration in metallic glass. Acta Materialia, 2007. 55(16): pp.5348-5358.

DOI: 10.1016/j.actamat.2007.05.054

[170] Pampillo, C.A., Localized shear deformation in a glassy metal. Scripta Metallurgica, 1972. 6(10): pp.915-917.

DOI: 10.1016/0036-9748(72)90144-5

[171] Zhou, M., A.J. Rosakis, and G. Ravichandran, On the growth of shear bands and failure-mode transition in prenotched plates: A comparison of singly and doubly notched specimens. International Journal of Plasticity, 1998. 14(4): pp.435-451.

DOI: 10.1016/s0749-6419(98)00003-5

[172] Pan, D., et al., Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses. Proceedings of the National Academy of Sciences, 2008. 105(39): pp.14769-14772.

DOI: 10.1073/pnas.0806051105

[173] Tsao, S.S. and F. Spaepen, Structural relaxation of a metallic glass near equilibrium. Acta Metallurgica, 1985. 33(5): pp.881-889.

DOI: 10.1016/0001-6160(85)90112-9

[174] Das, J., et al., ``Work-Hardenable'' Ductile Bulk Metallic Glass. Physical Review Letters, 2005. 94(20): p.205501.

[175] Schroers, J. and W.L. Johnson, Ductile Bulk Metallic Glass. Physical Review Letters, 2004. 93(25): p.255506.

DOI: 10.1103/physrevlett.93.255506

[176] Jiang, W.H., et al., Ductility of a Zr-based bulk-metallic glass with different specimen's geometries. Materials Letters, 2006. 60(29–30): pp.3537-3540.

DOI: 10.1016/j.matlet.2006.03.047

[177] Das, J., et al., Plasticity in bulk metallic glasses investigated via the strain distribution. Physical Review B, 2007. 76(9): p.092203.

[178] Chen, L.Y., et al., New Class of Plastic Bulk Metallic Glass. Physical Review Letters, 2008. 100(7): p.075501.

[179] Abdeljawad, F., M. Fontus, and M. Haataja, Ductility of bulk metallic glass composites: Microstructural effects. Applied Physics Letters, 2011. 98(3): p.031909.

DOI: 10.1063/1.3531660

[180] Magagnosc, D.J., et al., Tunable Tensile Ductility in Metallic Glasses. Scientific Reports, 2013. 3: p.1096.

[181] Lu, X.L., et al., Gradient Confinement Induced Uniform Tensile Ductility in Metallic Glass. Scientific Reports, 2013. 3: p.3319.

DOI: 10.1038/srep03319

[182] Yao, K.F., et al., Superductile bulk metallic glass. Applied Physics Letters, 2006. 88(12): p.122106.

DOI: 10.1063/1.2187516

[183] Ding, J., et al., Large-sized CuZr-based Bulk Metallic Glass Composite with Enhanced Mechanical Properties. Journal of Materials Science & Technology, 2014. 30(6): pp.590-594.

DOI: 10.1016/j.jmst.2014.01.014

[184] Jiang, F., et al., Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases. Materials Science and Engineering: A, 2007. 467(1–2): pp.139-145.

DOI: 10.1016/j.msea.2007.02.093

[185] Liu, J., et al., Microstructure and Compressive Properties of <I>In-Situ</I> Martensite CuZr Phase Reinforced ZrCuNiAl Metallic Glass Matrix Composite. MATERIALS TRANSACTIONS, 2010. 51(5): pp.1033-1037.

DOI: 10.2320/matertrans.m2010031

[186] Liu, Z.Q., et al., Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites. Scientific Reports, 2014. 4: p.4167.

DOI: 10.1038/srep04167

[187] Schryvers, D., et al., Unit cell determination in CuZr martensite by electron microscopy and X-ray diffraction. Scripta Materialia, 1997. 36(10): pp.1119-1125.

DOI: 10.1016/s1359-6462(97)00003-1

[188] Seo, J.W. and D. Schryvers, TEM investigation of the microstructure and defects of CuZr martensite. Part I: Morphology and twin systems. Acta Materialia, 1998. 46(4): pp.1165-1175.

DOI: 10.1016/s1359-6454(97)00333-9

[189] Seo, J.W. and D. Schryvers, TEM investigation of the microstructure and defects of CuZr martensite. Part II: Planar defects. Acta Materialia, 1998. 46(4): pp.1177-1183.

DOI: 10.1016/s1359-6454(97)00334-0

[190] Song, K., Synthesis, microstructure, and deformation mechanisms of CuZr-based bulk metallic glass composites. (2013).

[191] Song, K.K., et al., Correlation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites. AIP Advances, 2013. 3(1): p.012116.

DOI: 10.1063/1.4789516

[192] Kim, D.H., et al., Phase separation in metallic glasses. Progress in Materials Science, 2013. 58(8): pp.1103-1172.

[193] Sun, L., et al., Phase Separation and Microstructure Evolution of Zr48Cu36Ag8Al8 Bulk Metallic Glass in the Supercooled Liquid Region. Rare Metal Materials and Engineering, 2016. 45(3): pp.567-570.

DOI: 10.1016/s1875-5372(16)30073-x

[194] Antonowicz, J., et al., Early stages of phase separation and nanocrystallization in Al-rare earth metallic glasses studied using SAXS/WAXS and HRTEM methods. Reviews on Advanced Materials Science, 2008. 18(5): pp.454-458.

[195] Park, B.J., et al., Phase Separating Bulk Metallic Glass: A Hierarchical Composite. Physical Review Letters, 2006. 96(24): p.245503.

[196] Kelton, K.F., A new model for nucleation in bulk metallic glasses. Philosophical Magazine Letters, 1998. 77(6): pp.337-344.

DOI: 10.1080/095008398178318

[197] Chang, H.J., et al., Synthesis of metallic glass composites using phase separation phenomena. Acta Materialia, 2010. 58(7): pp.2483-2491.

DOI: 10.1016/j.actamat.2009.12.034

[198] Kündig, A.A., et al., In situ formed two-phase metallic glass with surface fractal microstructure. Acta Materialia, 2004. 52(8): pp.2441-2448.

DOI: 10.1016/j.actamat.2004.01.036

[199] Oh, J.C., et al., Phase separation in Cu43Zr43Al7Ag7 bulk metallic glass. Scripta Materialia, 2005. 53(2): pp.165-169.

DOI: 10.1016/j.scriptamat.2005.03.046

[200] Park, E.S. and D.H. Kim, Phase separation and enhancement of plasticity in Cu–Zr–Al–Y bulk metallic glasses. Acta Materialia, 2006. 54(10): pp.2597-2604.

DOI: 10.1016/j.actamat.2005.12.020

[201] Paradis, P.-F., et al., Materials properties measurements and particle beam interactions studies using electrostatic levitation. Materials Science and Engineering: R: Reports, 2014. 76: pp.1-53.

DOI: 10.1016/j.mser.2013.12.001

[202] Guo, G.-Q., et al., How Can Synchrotron Radiation Techniques Be Applied for Detecting Microstructures in Amorphous Alloys? Metals, 2015. 5(4): p. (2048).

DOI: 10.3390/met5042048

[203] Guo, G.-Q., et al., Detecting Structural Features in Metallic Glass via Synchrotron Radiation Experiments Combined with Simulations. Metals, 2015. 5(4): p. (2093).

DOI: 10.3390/met5042093

[204] Michalik, S., et al., Structural modifications of swift-ion-bombarded metallic glasses studied by high-energy X-ray synchrotron radiation. Acta Materialia, 2014. 80: pp.309-316.

DOI: 10.1016/j.actamat.2014.07.072

[205] Mu, J., et al., In situ high-energy X-ray diffraction studies of deformation-induced phase transformation in Ti-based amorphous alloy composites containing ductile dendrites. Acta Materialia, 2013. 61(13): pp.5008-5017.

DOI: 10.1016/j.actamat.2013.04.045

[206] Yi, J., et al., Glass-Forming Ability and Crystallization Behavior of Al86Ni9La5 Metallic Glass with Si Addition Advanced Engineering Materials, 2016. 18(6): pp.972-977.

DOI: 10.1002/adem.201500354

[207] Huang, Y.J., J. Shen, and J.F. Sun, Bulk metallic glasses: Smaller is softer. Applied Physics Letters, 2007. 90(8): p.081919.

DOI: 10.1063/1.2696502

[208] Oh, Y.S., et al., Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites. Acta Materialia, 2011. 59(19): pp.7277-7286.

DOI: 10.1016/j.actamat.2011.08.006

[209] Kim, K.B., et al., Heterogeneous distribution of shear strains in deformed Ti66.1Cu8Ni4.8Sn7.2Nb13.9 nanostructure-dendrite composite. physica status solidi (a), 2005. 202(13): pp.2405-2412.

DOI: 10.1002/pssa.200520073

[210] He, G., et al., Novel Ti-base nanostructure-dendrite composite with enhanced plasticity. Nat Mater, 2003. 2(1): pp.33-37.

DOI: 10.1038/nmat792

[211] Wang, Y., et al., Investigation of the microcrack evolution in a Ti-based bulk metallic glass matrix composite. Progress in Natural Science: Materials International, 2014. 24(2): pp.121-127.

DOI: 10.1016/j.pnsc.2014.03.010

[212] Zhang, T., et al., Dendrite size dependence of tensile plasticity of in situ Ti-based metallic glass matrix composites. Journal of Alloys and Compounds, 2014. 583: pp.593-597.

DOI: 10.1016/j.jallcom.2013.08.201

[213] Gargarella, P., et al., Ti–Cu–Ni shape memory bulk metallic glass composites. Acta Materialia, 2013. 61(1): pp.151-162.

DOI: 10.1016/j.actamat.2012.09.042

[214] Hofmann, D.C., et al., New processing possibilities for highly toughened metallic glass matrix composites with tensile ductility. Scripta Materialia, 2008. 59(7): pp.684-687.

DOI: 10.1016/j.scriptamat.2008.05.046

[215] Chu, J.P., Annealing-induced amorphization in a glass-forming thin film. JOM, 2009. 61(1): pp.72-75.

DOI: 10.1007/s11837-009-0014-x

[216] Inoue, A. and T. Zhang, Fabrication of Bulky Zr-Based Glassy Alloys by Suction Casting into Copper Mold. Materials Transactions, JIM, 1995. 36(9): pp.1184-1187.

DOI: 10.2320/matertrans1989.36.1184

[217] Inoue, A. and T. Zhang, Fabrication of Bulk Glassy Zr<SUB>55</SUB>Al<SUB> 10</SUB>Ni<SUB>5</SUB>Cu<SUB>30</SUB> Alloy of 30 mm in Diameter by a Suction Casting Method. Materials Transactions, JIM, 1996. 37(2): pp.185-187.

DOI: 10.2320/matertrans1989.37.185

[218] Lou, H.B., et al., 73 mm-diameter bulk metallic glass rod by copper mould casting. Applied Physics Letters, 2011. 99(5): p.051910.

DOI: 10.1063/1.3621862

[219] Qiao, J.W., et al., Synthesis of plastic Zr-based bulk metallic glass matrix composites by the copper-mould suction casting and the Bridgman solidification. Journal of Alloys and Compounds, 2009. 477(1–2): pp.436-439.

DOI: 10.1016/j.jallcom.2008.10.020

[220] Wall, J.J., et al., A combined drop/suction-casting machine for the manufacture of bulk-metallic-glass materials. Review of Scientific Instruments, 2006. 77(3): p.033902.

DOI: 10.1063/1.2179415

[221] Figueroa, I., et al., Preparation of Cu-based bulk metallic glasses by suction casting. (2007).

[222] Inoue, A., et al., Production methods and properties of engineering glassy alloys and composites. Intermetallics, 2015. 58: pp.20-30.

DOI: 10.1016/j.intermet.2014.11.001

[223] Wang, B., et al., Simulation of solidification microstructure in twin-roll casting strip. Computational Materials Science, 2010. 49(1, Supplement): p. S135-S139.

DOI: 10.1016/j.commatsci.2010.01.051

[224] Hofmann, D.C., et al., Semi-solid induction forging of metallic glass matrix composites. JOM, 2009. 61(12): pp.11-17.

DOI: 10.1007/s11837-009-0172-x

[225] Khalifa, H.E., Bulk metallic glasses and their composites : composition optimization, thermal stability, and microstructural tunability. (2009).

[226] Chen, B., et al., Improvement in mechanical properties of a Zr-based bulk metallic glass by laser surface treatment. Journal of Alloys and Compounds, 2010. 504: p. S45-S47.

DOI: 10.1016/j.jallcom.2010.04.053

[227] Santos, E.C., et al., Rapid manufacturing of metal components by laser forming. International Journal of Machine Tools and Manufacture, 2006. 46(12–13): pp.1459-1468.

DOI: 10.1016/j.ijmachtools.2005.09.005

[228] Sun, H. and K.M. Flores, Laser deposition of a Cu-based metallic glass powder on a Zr-based glass substrate. Journal of Materials Research, 2008. 23(10): pp.2692-2703.

DOI: 10.1557/jmr.2008.0329

[229] Sun, H. and K. Flores, Microstructural analysis of a laser-processed Zr-based bulk metallic glass. Metallurgical and Materials Transactions A, 2010. 41(7): pp.1752-1757.

DOI: 10.1007/s11661-009-0151-4

[230] Sun, H. and K.M. Flores, Spherulitic crystallization mechanism of a Zr-based bulk metallic glass during laser processing. Intermetallics, 2013. 43: pp.53-59.

DOI: 10.1016/j.intermet.2013.06.010

[231] Welk, B.A., et al., Phase Selection in a Laser Surface Melted Zr-Cu-Ni-Al-Nb Alloy. Metallurgical and Materials Transactions B, 2014. 45(2): pp.547-554.

DOI: 10.1007/s11663-013-9907-8

[232] Welk, B.A., M.A. Gibson, and H.L. Fraser, A Combinatorial Approach to the Investigation of Metal Systems that Form Both Bulk Metallic Glasses and High Entropy Alloys. JOM, 2016. 68(3): pp.1021-1026.

DOI: 10.1007/s11837-015-1779-8

[233] Borkar, T., et al., A combinatorial assessment of AlxCrCuFeNi2 (0 &lt; x &lt; 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties. Acta Materialia, 2016. 116: pp.63-76.

DOI: 10.1016/j.actamat.2016.06.025

[234] Li, X.P., et al., The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting. Materials & Design, 2014. 63: pp.407-411.

DOI: 10.1016/j.matdes.2014.06.022

[235] Li, X.P., et al., Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties. Materials Science and Engineering: A, 2014. 606: pp.370-379.

DOI: 10.1016/j.msea.2014.03.097

[236] Li, X.P., et al., Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass. Materials & Design (1980-2015), 2015. 65: pp.1-6.

DOI: 10.1016/j.matdes.2014.08.065

[237] Prashanth, K.G., et al., Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting. Additive Manufacturing, 2015. 6: pp.1-5.

DOI: 10.1016/j.addma.2015.01.001

[238] Jung, H.Y., et al., Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study. Materials & Design, 2015. 86: pp.703-708.

DOI: 10.1016/j.matdes.2015.07.145

[239] Thompson, S.M., et al., An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics. Additive Manufacturing, 2015. 8: pp.36-62.

DOI: 10.1016/j.addma.2015.07.001

[240] Shamsaei, N., et al., An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control. Additive Manufacturing, 2015. 8: pp.12-35.

DOI: 10.1016/j.addma.2015.07.002

[241] Yang, Y. and C.T. Liu, Size effect on stability of shear-band propagation in bulk metallic glasses: an overview. Journal of Materials Science, 2012. 47(1): pp.55-67.

DOI: 10.1007/s10853-011-5915-8

[242] Shi, Y. and M.L. Falk, Stress-induced structural transformation and shear banding during simulated nanoindentation of a metallic glass. Acta Materialia, 2007. 55(13): pp.4317-4324.

DOI: 10.1016/j.actamat.2007.03.029

[243] Jiang, W.H. and M. Atzmon, Mechanically-assisted nanocrystallization and defects in amorphous alloys: A high-resolution transmission electron microscopy study. Scripta Materialia, 2006. 54(3): pp.333-336.

DOI: 10.1016/j.scriptamat.2005.09.052

[244] Dodd, B. and Y. Bai, Adiabatic Shear Localization: Frontiers and Advances. 2012: Elsevier.

[245] Jiang, W.H., F.E. Pinkerton, and M. Atzmon, Deformation-induced nanocrystallization: A comparison of two amorphous Al-based alloys. Journal of Materials Research, 2005. 20(03): pp.696-702.

DOI: 10.1557/jmr.2005.0090

[246] Smugeresky, J., et al., Laser engineered net shaping(LENS) process: optimization of surface finish and microstructural properties. Advances in Powder Metallurgy and Particulate Materials--1997., 1997. 3: p.21.

DOI: 10.2172/554828

[247] Wang, H.-S., H.-G. Chen, and J.S.-C. Jang, Microstructure evolution in Nd:YAG laser-welded (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass alloy. Journal of Alloys and Compounds, 2010. 495(1): pp.224-228.

DOI: 10.1016/j.jallcom.2010.01.132

[248] Vandenbroucke, B. and J.P. Kruth, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts. Rapid Prototyping Journal, 2007. 13(4): pp.196-203.

DOI: 10.1108/13552540710776142

[249] Cunliffe, A., et al., Glass formation in a high entropy alloy system by design. Intermetallics, 2012. 23: pp.204-207.

DOI: 10.1016/j.intermet.2011.12.006

[250] Balla, V.K. and A. Bandyopadhyay, Laser processing of Fe-based bulk amorphous alloy. Surface and Coatings Technology, 2010. 205(7): pp.2661-2667.

DOI: 10.1016/j.surfcoat.2010.10.029

[251] Basu, A., et al., Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel. Surface and Coatings Technology, 2008. 202(12): pp.2623-2631.

DOI: 10.1016/j.surfcoat.2007.09.028

[252] Matthews, D.T.A., et al., Laser engineered surfaces from glass forming alloy powder precursors: Microstructure and wear. Surface and Coatings Technology, 2009. 203(13): pp.1833-1843.

DOI: 10.1016/j.surfcoat.2009.01.015

[253] Zhang, L.C., et al., Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy. Scripta Materialia, 2011. 65(1): pp.21-24.

DOI: 10.1016/j.scriptamat.2011.03.024

[254] Dutta, B. and F.H. Froes, Chapter 1 - The Additive Manufacturing of Titanium Alloys, in Additive Manufacturing of Titanium Alloys. 2016, Butterworth-Heinemann. pp.1-10.

DOI: 10.1016/b978-0-12-804782-8.00001-x

[255] Yan, M., et al., The influence of topological structure on bulk glass formation in Al-based metallic glasses. Scripta Materialia, 2011. 65(9): pp.755-758.

DOI: 10.1016/j.scriptamat.2011.07.009

[256] Mu, J., et al., Synthesis and Properties of Al-Ni-La Bulk Metallic Glass. Advanced Engineering Materials, 2009. 11(7): pp.530-532.

DOI: 10.1002/adem.200900100

[257] Yang, B.J., et al., Al-rich bulk metallic glasses with plasticity and ultrahigh specific strength. Scripta Materialia, 2009. 61(4): pp.423-426.

DOI: 10.1016/j.scriptamat.2009.04.035

[258] Yang, B.J., et al., Developing aluminum-based bulk metallic glasses. Philosophical Magazine, 2010. 90(23): pp.3215-3231.

DOI: 10.1080/14786435.2010.484401

[259] Balla, V.K., et al., Laser-assisted Zr/ZrO2 coating on Ti for load-bearing implants. Acta Biomaterialia, 2009. 5(7): pp.2800-2809.

DOI: 10.1016/j.actbio.2009.03.032

[260] Balla, V.K., et al., Direct laser processing of a tantalum coating on titanium for bone replacement structures. Acta Biomaterialia, 2010. 6(6): pp.2329-2334.

DOI: 10.1016/j.actbio.2009.11.021

[261] Wang, X., et al., Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials, 2016. 83: pp.127-141.

DOI: 10.1016/j.biomaterials.2016.01.012

[262] Gibson, I., W.D. Rosen, and B. Stucker, Medical Applications for Additive Manufacture, in Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. 2010, Springer US: Boston, MA. pp.400-414.

DOI: 10.1007/978-1-4419-1120-9_15

[263] Hays, C.C., C.P. Kim, and W.L. Johnson, Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Materials Science and Engineering: A, 2001. 304–306: pp.650-655.

DOI: 10.1016/s0921-5093(00)01557-4

[264] Zhang, M.X. and P.M. Kelly, Edge-to-edge matching and its applications: Part I. Application to the simple HCP/BCC system. Acta Materialia, 2005. 53(4): pp.1073-1084.

DOI: 10.1016/j.actamat.2004.11.007

[265] Zhang, M.X. and P.M. Kelly, Edge-to-edge matching model for predicting orientation relationships and habit planes—the improvements. Scripta Materialia, 2005. 52(10): pp.963-968.

DOI: 10.1016/j.scriptamat.2005.01.040

[266] Akihisa, I., et al., Aluminum-Based Amorphous Alloys with Tensile Strength above 980 MPa (100 kg/mm2). Japanese Journal of Applied Physics, 1988. 27(4A): p. L479.

DOI: 10.1143/jjap.27.l479

[267] Inoue, A., Bulk amorphous and nanocrystalline alloys with high functional properties. Materials Science and Engineering: A, 2001. 304–306: pp.1-10.

DOI: 10.1016/s0921-5093(00)01551-3

[268] Qian, M., Metal Powder for Additive Manufacturing. JOM, 2015. 67(3): pp.536-537.

DOI: 10.1007/s11837-015-1321-z

[269] Kruth, J.P., et al., Selective laser melting of iron-based powder. Journal of Materials Processing Technology, 2004. 149(1–3): pp.616-622.

DOI: 10.1016/j.jmatprotec.2003.11.051