Experimental Investigations on Capabilities of Resistance Spot Welding and MIG Brazing for Producing Corrugated Beams Using Galvanized Steel Sheets

Bogdan Radu; Viorel Ungureanu; Ioan Both; Mircea Burca; Ştefan Benzar; Dan Dubină

doi:10.4028/www.scientific.net/AMR.1164.47

Paper Titles

Preliminary Research for Development of MW-TIG Hybrid Welding System
p.9

Eutectic Microbonding of Composite Materials Using Microwave Technology
p.17

Influence Analysis of the Controllable Factors on the Objective Functions for Optimizing the Welding of PE 100 Pipelines for Natural Gas Distribution
p.25

Considerations about Hollow Polypropylene Balls Manufacturing by Ultrasonic Welding
p.35

Experimental Investigations on Capabilities of Resistance Spot Welding and MIG Brazing for Producing Corrugated Beams Using Galvanized Steel Sheets
p.47

Control of the Properties of Welded Joints in Wet Underwater Welding
p.55

Comparative Study on Remaining Life Assessment of a Pressure Vessel, Working in Severe Conditions, Based on Results of Metallographic Replicas and Creep Tests
p.67

Estimating the Concrete Compressive Strength by Using the Concrete Ultrasonic Pulse Velocity and Moduli of Elasticity
p.77

Development of Green Cementitious Materials by Using the Abrasive Waterjet Garnet Wastes: Preliminary Studies
p.87

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1164Experimental Investigations on Capabilities of...

Experimental Investigations on Capabilities of Resistance Spot Welding and MIG Brazing for Producing Corrugated Beams Using Galvanized Steel Sheets

Abstract:

This paper summarized the research work carried out by a team from Department of Steel Structures and Structural Mechanics, together with Department of Materials Science and Engineering, from University Politehnica Timisoara, which tried to determine the possibility to use welding for obtaining built-up cold-formed steel beams made of corrugated galvanized steel sheets (grade S350GD+Z). There were analyzed two joining processes: MIG brazing and Resistance Spot Welding with the aim to replace the self-drilling screws used until now. The results are very promising and these solutions of joining have beside economic advantages also technical and quality ones.

You might also be interested in these eBooks

Innovative Technologies for Joining Advanced Materials XI (Supplement Book)

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1164)

Pages:

47-54

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1164.47

Citation:

Cite this paper

Online since:

June 2021

Authors:

Bogdan Radu*, Viorel Ungureanu, Ioan Both, Mircea Burca, Ştefan Benzar, Dan Dubină

Keywords:

Galvanized Steel Sheets, Microstructure, MIG Brazing, Optic Microscopy, Resistance Spot Welding

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] H. Hackl, MIG brazing of galvanized light-gauge sheets,, www.fronius.com.

Google Scholar

[2] S. Selvi, A. Vishvaksenan, E. Rajasekar, Cold metal transfer (CMT) technology – An overview,, Defence Technology, vol. 14, 28-22, (2018).

DOI: 10.1016/j.dt.2017.08.002

Google Scholar

[3] D. Iordachescu, L. Quintino, R. Miranda, G. Pimenta, Influence of shielding gases and process parameters on metal transfer and bead shape in MIG brazed joints of the thin zinc coated steel plates,, Materials & Design, vol. 27 (5), 381-390, (2006).

DOI: 10.1016/j.matdes.2004.11.010

Google Scholar

[4] N. P. Kumar, S. A. Vendan, N. S. Shanmugam, Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061,, Journal of Alloys and Compounds, 658, 255-264, (2016).

DOI: 10.1016/j.jallcom.2015.10.166

Google Scholar

[5] CEN, EN 1993-1-5, Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements,, Brussels, (2006).

Google Scholar