An Experimental Investigation on Geopolymer Bricks Using Quarry Dust as Fine Aggregate

Article Preview

Abstract:

Environmental pollution in the construction industry is mostly caused by the manufacture of Portland cement, which releases pollutants like CO2. In this study, geopolymer bricks constructed with fly ash, GGBS, and quarry dust as fine aggregates have undergone experimental work. An activator used in the mixture of sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) is also used. For each combination, the molarity of sodium hydroxide was kept constant at 1M, while the ratios of sodium silicate to sodium hydroxide solution varied between 0.25, 0.5, and 1. Brick samples of 230 mm by 110 mm by 70 mm are collected. Tests on the test specimens were performed on the brick qualities, including efflorescence, water absorption, and compressive strength.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

73-80

Citation:

Online since:

December 2024

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2024 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] C.A. Hendriks1, "Emission Reduction of Greenhouse Gases from the Cement Industry" Greenhouse gas control technologies conference paper.

Google Scholar

[2] Ernst Worerell. Lynn Price, et al. "CO2 emission from the global cement industry", Annual review of energy and the environment. Vol 26: p-303-329.

Google Scholar

[3] D.M.J. Sumajouw, D. Hardjito, S. Wallah, and B.V. Rangan, ".Behavior of Geopolymer Brick Columns under Equal Load Eccentricities".

Google Scholar

[4] N A Lloyd and B V Rangan Curtin University of Technology, "Geopolymer Brick with Fly Ash".

Google Scholar

[5] B. Vijaya Rangan, Djwantoro Hardjito, Steenie E. Wallah, and Dody M.J. Sumajouw , "Studies on fly ash-based geopolymer brick", Geopolymer: green chemistry and sustainable development solutions.

DOI: 10.1080/13287982.2005.11464946

Google Scholar

[6] Davidovits, J. (1988b). Geopolymer Chemistry and Properties. Paper presented at the Geopolymer '88, First European Conference on Soft Mineralurgy, Compiegne, France.

Google Scholar

[7] Warner, R.F., Rangan, B.V., Hall, A.S. & Faulkes, K.A. (1998).Brick Structures. Melbourne: Longman.

Google Scholar

[8] Xu, H., & Deventer, J. S. J. V. (1999). The geopolymerization of Natural Alumino Silicates. Paper presented at the Geopolymer '99 International Conference, Saint-Quentin, France.

Google Scholar

[9] van Jaarsveld, J.G.S., van Deventer, J.S.J., & Schwartzman, A.(1999). The potential use of geopolymeric materials to immobilize toxic metals: Part II. Material and leaching characteristics. Minerals Engineering, 12(1), 75-91.

DOI: 10.1016/s0892-6875(98)00121-6

Google Scholar

[10] Malhotra, V.M. (1999). Making Brick "Greener" With Fly Ash. ACI Brick International, 21 (5), 61-66.

Google Scholar

[11] Palomo, A., M.W. Grutzeck, & M.T. Blanco.(1999). Alkali-activated fly ashes A cement for the future. Cement And Brick Research, 29(8), 1323-1329.

DOI: 10.1016/s0008-8846(98)00243-9

Google Scholar

[12] Wee, T. H., Suryavanshi, A. K., Wong, S. F., &Rahman, A. K. M. A. (2000) Sulfate Resistance of Brick Containing Mineral Admixtures. ACIMaterials Journal, 97(5), 536-549.

Google Scholar

[13] Xu, H., & Deventer, J. S. J. V. (2000). The geopolymerization of alumino silicate minerals. International Journal of Mineral Processing, 59(3), 247-266.

DOI: 10.1016/s0301-7516(99)00074-5

Google Scholar