Development of NC System of the 3-PUU Parallel Machine Tool Based on PMAC

Hai Peng Lin; Yi Min Xu

doi:10.4028/www.scientific.net/AMR.142.233

Paper Titles

A Method to Center Extraction of Reference Point Algorithm in Reverse Engineering
p.214

Optimal Design of Flexible Manufacturing System Based on Optical Measurement Principle
p.219

Material Removal for Modal Effect on Impeller Blades by Finite Element Analysis
p.223

Rotation Inertia Measurement Device Design of Winged Rigid Body Based on TRIZ Conflict Resolving Matrix
p.228

Development of NC System of the 3-PUU Parallel Machine Tool Based on PMAC
p.233

Finite Element Analysis and Dynamic Testing for Hard Gear Cutting by Gear Hobbing Machine
p.238

Design and Stimulation of Hydraulic Servo System for Vehicle Test Equipment for Rubber Shock Absorber
p.243

Research on Chip Breaking Mechanism of High-Temperature and High-Strength Steel 2.25Cr-1Mo-0.25V
p.248

Research on the Machinability of Hydrogenated Cylindrical Shell Materials (2.25 Cr-1Mo-0.25V Steel)
p.253

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 142Development of NC System of the 3-PUU Parallel...

Development of NC System of the 3-PUU Parallel Machine Tool Based on PMAC

Abstract:

In this paper, a PUU parallel machine tool with three translational degrees of freedom (DOF) is designed which is usually used in the complex grain machining of the solid rocket engine.， and its numerical control system is described in detail. The so-called “PC+PMAC” is used as the hardware platform, and Windows as the software one, the parallel machine tool NC system is built. The features, such as multi-axis motion control and fast real time communication of PMAC, software resources and efficient data processing of PC are utilized such that Man Machine Interface, position servo control, real time measurement of cutter configuration and closed loop control of the parallel machine tool are realized.