Preparation of WC-Low Chromium Cast Iron Composite Material by Cast-Infiltration

Ning An

doi:10.4028/www.scientific.net/AMR.154-155.1104

Paper Titles

Control of PLC for Paving Stock Mechanism of New-Type Machine Tool about Rapid Prototyping Manufacturing for Ceramic Parts
p.1085

Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: II. with Hybrid GA-BP Method
p.1091

Interface Behavior of Joint between CoCr Coating and Steel 35CrMo Substrate Produced by Electro-Spark Deposition
p.1096

Mechanics Behavior Analysis on Laser Cladding under Repeated Impacting Load
p.1100

Preparation of WC-Low Chromium Cast Iron Composite Material by Cast-Infiltration
p.1104

Study on the Spraying Technique of Ultra-High Strength Parts Made by 30CrMnSiNi2A Steel
p.1110

Optimization of the Hot Pressing Parameters of Nanocomposite Ceramic Tool and Die Materials: I. with BP Neural Network Method
p.1114

Optimization of Laser Transmission Joint between PET and Titanium Using Response Surface Methodology
p.1119

A Novel In Situ Roughness Measurement Based on Spatial Average Analysis of Binary Speckle Image
p.1125

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 154-155Preparation of WC-Low Chromium Cast Iron Composite...

Preparation of WC-Low Chromium Cast Iron Composite Material by Cast-Infiltration

Abstract:

Use of Low-chromium white cast iron as matrix, WC as reinforcement particles, in conditions of Quartz sand in ordinary water glass dry, non-vacuum, using self-made penetration compound was prepared by WC particles reinforced surface composite material with superior wear resistance, is 2.73 times that of high chromium cast iron composite layer hardness can reach HRC60 or more. Smooth casting surface roughness, dimensional accuracy is more accurate, composite layer and substrate is good.