Sideways Movement of Strip in In-Plane Roll-Bending Process with Conical Rollers

Zhi Jun Li; He Yang; Heng Li; Jing Liu

doi:10.4028/www.scientific.net/AMR.154-155.1419

Paper Titles

Research on Molding for Al₂O₃Ceramic Substrate and its Processing Technic
p.1397

Numerical Study and Experimental Investigation of Solidification Phenomena in Semi-Continuous Casting of Bronze
p.1401

Optimization of Laser Deposited Ni-Based Single Crystal Superalloys Microstructure
p.1405

Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Columnar Solidification
p.1415

Sideways Movement of Strip in In-Plane Roll-Bending Process with Conical Rollers
p.1419

Research and Application Status of Arc Welding Heat Source Model for T-Joint Numerical Simulation
p.1423

The Steel Joint Life of the Single-Wheeled Cycle Using FEM Analysis
p.1427

A Heat Transfer and Solidification Model of Continuous Cast
p.1431

Effect of Chromium Nitride on Microstructure and Properties of Fe-Based Coating by Laser Cladding
p.1435

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 154-155Sideways Movement of Strip in In-Plane...

Sideways Movement of Strip in In-Plane Roll-Bending Process with Conical Rollers

Abstract:

As a result of unequal reduction, the sideways movement of the strip at the entry is occurred in in-plane roll-bending process with conical rollers. This will reduce the shape quality of the formed ring. To control the sideways movement, FE simulations with applying unilateral and bilateral guide planes are carried out by employing ABAQUS/Explicit code. The results show that, the strip moves towards the bottom end and scratches with guide plane at the trailing end if applying unilateral guide plane; the sideways movement can be controlled effectively with circularity of 0.993 and maximum deviation ratio of 12.5% for the formed ring if applying bilateral guide planes.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 154-155)

Pages:

1419-1422

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.154-155.1419

Citation:

Cite this paper

Online since:

October 2010

Authors:

Zhi Jun Li, He Yang, Heng Li, Jing Liu

Keywords:

Finite Element (FE) Simulation, Guide Plane, In-Plane Roll-Bending, Sideways Movement

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] H. Yang, F. J. Xian and Y. L. Liu: J. Mater. Process. Technol. Vol. 114 (2001), p.103.

Google Scholar

[2] X. L. Dai, X. M. Zhao and G. D. Wang: J. Mater. Metall. Vol. 2 (2003), p.45 (in Chinese).

Google Scholar

[3] A. Nilsson: J. Mater. Process. Technol. Vol. 80–81 (1998), p.325.

Google Scholar

[4] Y. Tang: Heavy Machinery Sci. Technol. Vol. 3 (2007), p.4 (in Chinese).

Google Scholar

[5] Z. J. Li and H. Yang, in: NUMIFORM 2010 Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, edited by F. Barlat, Y. H. Moon and Myong-Gyu. Lee/AIP Conference Proceedings 1252, Melville, NY (2010).

Google Scholar