Experimental Study on Hermetically-Sealed Construction and Ether-Resistance Materials in DME Engines

Ping Huo; Jian Ping Wang; Rui Xiang Gao

doi:10.4028/www.scientific.net/AMR.199-200.784

Paper Titles

Friction and Wear Characteristics of Spherical Plain Bearings with PTFE Woven Liners
p.763

Torsional-Vibration Action Research on the Diesel Engine Crankshaft
p.769

Vibration Characteristic of Shell-Shafting Coupled System Induced by Propeller Exciting Force
p.773

Application of Model Based Diagnosis in Two-Span Rotor System with Two Unbalance Faults
p.780

Experimental Study on Hermetically-Sealed Construction and Ether-Resistance Materials in DME Engines
p.784

Determination Method of Angular Domain Resampling Order in Computed Order Tracking Analysis
p.790

Effect of Blade Numbers on Aerodynamic Performance and Noise of Small Axial Flow Fan
p.796

Propagation Character of the Stress Wave in Weld Joints
p.801

Analysis and Design of Stator of Traveling Wave Type Rotary Ultrasonic Motor
p.805

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 199-200Experimental Study on Hermetically-Sealed...

Experimental Study on Hermetically-Sealed Construction and Ether-Resistance Materials in DME Engines

Abstract:

Considering the characteristics of Dimethyl ether(DME), such as low viscosity, strong dissolvability, swelling and ageing for usual rubber blankets, as well as mechanical property variation, some gum elastic parts could be corroded and lose their sealability. In order to avoid leak out of fuel feeding line and oil reserve tank, the taper face Hermetically-sealed construction was designed as the tube joint and the ether-resistance materials FM-1 was chosen as the sealant. And a gas impermeability experiment of joint was conducted to assess the tightness.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 199-200)

Pages:

784-789

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.199-200.784

Citation:

Cite this paper

Online since:

February 2011

Authors:

Ping Huo, Jian Ping Wang, Rui Xiang Gao

Keywords:

Dimethyl Ether (DME), Engine, FM-1, Sealing, Swelling Capacity

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Li Genbao, Zhou Longbao, Liu Quanbing, Pan Keyu. Investigation on Compatibility of Rubber Sealing Parts with Fuel in Dimethyl Ether Engine [J]. Journal of Xi'an Jiaotong University. 2005(3), pp.317-321.

Google Scholar

[2] Fu Zheng, Materials Performance and Application Design of Rubber [M]. Chemical Industry Press, (2003).

Google Scholar

[3] GB/T7759-1996，Rubber, Vulcanized or Thermoplastic-Determination of Compression Set at Ambient Elevated or Low Temperatures. Standards Press of China, 1997. China Standard, GB/T7759-(1996).

DOI: 10.3403/30374433

Google Scholar

[4] Zen Xiangzhao, The Seal Material Selection of Cylinder for Liquefied DME. [J] Science and Technology Innovation Herald. 2009(21) , pp.92-94.

Google Scholar