Research on Direct Reduction Dynamic Model of Carbon-Bearing Pellet Containing Zinc

Jing Song Wang; Xiu Wei An; Wan Hua Yu; Xue Feng She; Yin Gui Ding; Qing Guo Xue

doi:10.4028/www.scientific.net/AMR.214.369

Paper Titles

Cyclic Oxidation Behaviour of MoSi₂ and MoSi₂-Si₃N₄ Composites for Aircraft Gas Turbine Elements
p.349

Structure and Rheological Behavior of Alkoxide-Based Precursors for Drawing of Metal Oxide Micro- and Nanofibres
p.354

A Novel Biocompatible Actuator Based on Electrospun Cellulose Acetate
p.359

Synergetic Effects between Al₂O₃ and HZSM-5 for NO Reduction by CH₄
p.364

Research on Direct Reduction Dynamic Model of Carbon-Bearing Pellet Containing Zinc
p.369

Biaxial Gas-Pressure Forming of a Duplex Stainless Steel
p.374

Electrodeposition of Copper-Indium-Diselenide (CuInSe₂) Thin Films
p.378

Optimal Scheduling and Simulation of Snow Removers for Airfield Pavement Based on Breadth-First Search
p.383

Nanomechanical Properties of Prepared-TiO₂ Films Using Nanoindentation Technique
p.388

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 214Research on Direct Reduction Dynamic Model of...

Research on Direct Reduction Dynamic Model of Carbon-Bearing Pellet Containing Zinc

Abstract:

Base on reduction experimental data, considering the reduction process factors like carbon content, reductive removal of ZnO, changing size of pellet, and partial pressure of reducing gas, also coupled heat transfer, mass transfer and chemical reactions, a direct reduction mathematical model on carbon-bearing pellet containing zinc has been established. The reliability of the model was testified by programming and experiments. Experiments showed that, under the reduction conditions that carbon and oxygen mole ratio at 1.0 and reduction temperature 1603K, metallization rate 87% and dezincification rate 99% were observed after 15 minutes of heating.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 214)

Pages:

369-373

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.214.369

Citation:

Cite this paper

Online since:

February 2011

Authors:

Jing Song Wang, Xiu Wei An, Wan Hua Yu, Xue Feng She, Yin Gui Ding, Qing Guo Xue

Keywords:

Carbon-Bearing Pellet, Dezincification, Direct Reduction, Model

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Dongyan Wang, Weiqing Chen, Rongzhang Zhou: J. Univ. Sci. Technol. B Vol. 20 (1998), pp.113-116 (In Chinese).

Google Scholar

[2] Dongyan Wang, Weiqing Chen, Rongzhang Zhou: J. Univ. Sci. Technol. B Vol. 19 (1997), pp.130-133 (In Chinese).

Google Scholar

[3] Tomohiro AKIYAMA, Hiromichi OHTA, Reijiro TAKAHASHI: ISIJ International Vol. 32 (1992) pp.829-837.

Google Scholar

[4] E. DONSKOI, D.L.S. McELWAIN: Metall. Mater. Trans. B Vol. 34B (2003) pp.93-102.

Google Scholar

[5] T. Coetsee, P.C. Pistorius, E.E. de Villiers: Miner. Eng Vol. 15 (2002), pp.919-929.

Google Scholar

[6] Rao Y K: Metall. Mater. Trans. B Vol. 2(1971) pp.1439-1447.

Google Scholar

[7] R. Haque, H.S. Ray, A. Mukherjee: Scand. J. Metall Vol. 21 (1992), pp.78-85.

Google Scholar

[8] M.S. Valipour, M.Y. Motamed Hashemi, Y. Saboohi: Adv. Powder Technol Vol. 17 (2006), pp.277-295.

Google Scholar