Research into Modeling Methods Basing on Product Presentation Information Base
Unprecedented challenges arehas been facinging by the traditional industrial design methods, shortening the product development cycle and improving design efficiency has become an important issue for designers, various kinds of new design methods have thus emerged, among which the Design Professional Knowledgebase is the very effective one. The goal of this research is to collect a large quantity of information about product presentation to establish a professional knowledge base – the Product Presentation Database, through which we explored new thinking about industrial design configuration on the one hand, and on the other, designers can refer to this database for lots of information about product design to improve design efficiency greatly.This document explains and demonstrates how to prepare your camera-ready manuscript for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. The text area for your manuscript must be 17 cm wide and 25 cm high (6.7 and 9.8 inches, resp.). Do not place any text outside this area. Use good quality, white paper of approximately 21 x 29 cm or 8 x 11 inches (please do not change the document setting from A4 to letter). Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.
Z. Wang et al., "Research into Modeling Methods Basing on Product Presentation Information Base", Advanced Materials Research, Vol. 267, pp. 189-192, 2011