Numerical Simulation and Optimization Practice of Oxygen Lance for Converter Steelmaking

Abstract:

The lance system is one of the important link of converter. Stable and secure of the system is a necessary condition for whole production system to function normally. The numerical simulation for a three-dimensional oxygen lance nozzle was carried out according to the fundamental parameters of PZH steel, the characteristics of the oxygen jet were analyzed and discussed. The oxygen lance nozzle with the optimum design has achieved good results in practice: the average formation time of early slag was reduced by 1 min and 23 seconds, the pure blowing time was reduced by 46 seconds, the oxygen consumption per ton steel decreased by 1.05 m³/t, the rate of dephosphorization was increased by 1.35%, the basicity of slag was reduced by 0.38, the phosphorus and sulfur distribution ratio between slag and liquid iron were also increased effectively.

• Periodical: Advanced Materials Research (Volume 402)
• Pages: 156-159
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.402.156
• Online since: November 2011
• Authors: Yong Chen, Xin Teng Liang, Jian Hua Zeng, Jun Chen, Rong Di Liu
• Keywords: Converter Steelmaking, Metallurgical Effect, Numerical Simulation, Oxygen Jet, Oxygen Lance

References

[1] LIU Rong-di,in: Intensified Smelting and Design of Oxygen Lance for Converter Steelmaking with Semi-steel. Sichuan Metallurgy, 1998;5:13~17 .in Chinese.

[2] WANG Wen-jing, ZHAO Hong-xin,PAN Yi-fang,etc,in:Numerical Simulation on Flow Behavior of Nozzle Jets in Oxygen Lance. Journal of Iron and Steel Research;2010，22(5):7~10.