Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process

Dong Xu; Da Qiang Cang; Ling Ling Zhang; Li Xue Qin; Jian Feng Duan

doi:10.4028/www.scientific.net/AMR.402.446

Paper Titles

Experimental Study on the Impact of Oxygen Lances on Bath Mixing in EAF
p.425

Turbulent Flow of Molten Steel in Thin Slab Continuous Casting Mold
p.432

The Coupled Heat and Mass Transfers in the Endothermic Chemical Reaction Packed Beds
p.436

Generation and Emission Characteristics of Polycyclic Aromatic Hydrocarbons in Single Coal Coking Process
p.442

Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process
p.446

Study on Mechanism of Desulfurization by Spent Zn-MnO₂ Batteries
p.452

Road Performance of Concrete Incorporating Manganese Slag
p.457

Combustion Performance and NO Emission in Industrial Furnace under Preheated Air Condition with Different Excess Air Ratio
p.463

Large-Scale Rotary Steam Tube Drying System and Equipment for Copper Powder
p.467

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 402Effect of Lance Nozzle Angle and Mixing Gas...

Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process

Abstract:

The hot experiment was carried out to study the effect of lance nozzle and mixing gas blowing on steelmaking. The heat load of oxygen lance, component in the bath and dust generation were studied in the hot experiment under different lances and mixing blowing process. The absorbed heat is lower and the slag adhesion on the oxygen lance is reduced with the lance nozzle angle increasing. By using small portion of carbon dioxide as top gas is help to reduce the temperature in the impact area and decrease the dust generation, but the decarbonization rate decrease with the proportion of carbon dioxide increasing.

You might also be interested in these eBooks

Advances in Metallurgical and Mining Engineering

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 402)

Pages:

446-451

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.402.446

Citation:

Cite this paper

Online since:

November 2011

Authors:

Dong Xu, Da Qiang Cang, Ling Ling Zhang, Li Xue Qin, Jian Feng Duan

Keywords:

BOF Dust, Converter, Mixing Gas Blowing, Nozzle Angle

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] S. K. Ajmani and A. Chatterjee. Ironmaking and Steelmaking, Vol. 32(2005): pp.515-527.

Google Scholar

[2] M. Martín, M. Rendueles and M. Díaz. Chemical Engineering Research and Design, Vol. 83(2005): pp.1076-1084.

Google Scholar

[3] M. Iguchi, O. J. Ilegbusi, H. Ueda, T. Kuranaga, and Z. Morita. Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science, Vol. 27(1996): pp.35-41.

Google Scholar

[4] P. Ternstedt, A. Tilliander, P. Jönsson and M. Iguchi. ISIJ International, Vol. 50(2010): pp.663-667.

DOI: 10.2355/isijinternational.50.663

Google Scholar

[5] R.J. Jin, R. Zhu, L.X. Fen and Z.J. Yin. Journal of University of Science and Technology Beijing. 2007, Vol. 29(2007): pp.77-80.

Google Scholar