A Research on the Forward Slip Coefficient in Alloyed Bar Rolling by the Round-Oval-Round Pass Sequence

Abstract:

For predicting the forward slip coefficient and veocity of outgoing workpiece exactly during alloyed bar rolling by Round-Oval-Round pass sequence, the influence of the spred of the outgoing workpiece and its contact boundary condition was considered and the calculating formula for the effective height of outgoing workpiece and the mean roll radius was proposed individually. Moreover, the new parameters were substituted into the Shinokura and Takai Formula to modify it. Then a modified forward slip coefficient firmula was proposed. The validity of the theoretical model has been examined by the bar rolling experiment and the numerical simulation using three-dimensional rigid-plastic FEM. Compared with the Shinokura and Takai dormula, the predict accuracy of the modified formula was improved apparently. So, it can be applied in alloyed bar rolling to predict the the forward slip coefficient and veocity of outgoing workpiece exactly.

• Periodical: Advanced Materials Research (Volume 413)
• Pages: 444-448
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.413.444
• Online since: December 2011
• Authors: Jian Feng Song, Yong Gang Dong
• Keywords: Alloyed Bar, Forward-Slip, Rigid-Plastic FEM, Round-Oval-Round

References

[1] Zhao Songjun, Tang Wenlin. The Pass Design of Strctural Sections, Beijing: Metallurgical Industry Press, 2000: 79(in Chinese).

[2] Z. Wusatowski. Fundamentals of Rolling, Pergamon Press[M], London, 1969. 107.

[3] T. Shinokura and K. Takai,. Spread charateristics and Spread formula in steel bar rolling[J]. Tetsu-To-Hagane, 1986. 72, 1870(in Japanese).

DOI: 10.2355/tetsutohagane1955.72.14_1877

[4] T. Shinokura and K. Takai, A new method for calculating spread in rod rolling[J], Journal of Applied Metalworking, 2 (1982), p.94.

DOI: 10.1007/bf02834206

[5] Y. Lee and S. Choi, New approach for the prediction of stress free surface profile of a workpiece in rod rolling[J]. ISIJ INTERNATIONAL, 2000. 40, 624.

DOI: 10.2355/isijinternational.40.624

[6] Y. Lee, S. Choi and Y.H. Kim. Mathematical model and experimental validation of surface profile of a workpiece in round-oval –round pass sequence[J]. J. Mater. Process. Technol. 2000. 108, 87.

DOI: 10.1016/s0924-0136(00)00734-2

[7] Y. Lee, An analytical study of mean roll radius in rod rolling[J]. ISIJ INTERNATIONAL, 2001. 41, 1414.

DOI: 10.2355/isijinternational.41.1414

[8] Dong Yonggang, Zhang Wenzhi, Song Jianfeng. A new analytical model for the calculation of mean roll radius in round-oval-round alloy bar rolling. ISIJ INTERNATIONAL 2006, 46(10): 1458-1466.

DOI: 10.2355/isijinternational.46.1458

[9] Dong Yonggang, Zhang Wenzhi, Song Jianfeng. A Novel Approach for the Prediction of surface Profile of Outgoing Workpiece and the Calculation of Mean Roll Radius In Alloy Bar Rolling. ACTA METALLURGICA SINICA(English Letters) 2007, 20 (1): 49-58.

DOI: 10.1016/s1006-7191(07)60007-6

[10] Dong Yonggang, Zhang Wenzhi, Song Jianfeng. An analytical model for the prediction of cross-section profile and mean roll radius in alloy bar rolling. Journal of University of Science and Technology Beijing, 2008, 15(3): 344-351.

DOI: 10.1016/s1005-8850(08)60065-1