Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes

Tsuyoshi Furushima; Takuma Ikeda; Kenichi Manabe

doi:10.4028/www.scientific.net/AMR.418-420.1036

Paper Titles

The Morphology Evolution of Vapour Phase Aluminide Coating on a CMSX4 Single Crystal Superalloy
p.1012

Idealisation and Formulation in Structural Dynamics Using Modal Analysis
p.1022

Impact of Shaft Coaxiality on the Local Stiffness of Angular Contact Ball Bearing
p.1026

Thickness Distribution Model of Condensate on Rotary Substrate by EB-PVD
p.1031

Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes
p.1036

Inhomogeneous 3D Finite Element Model for Prediction of Free Surface Roughening
p.1040

Electrical and Flexural Properties of Copper and Graphite Filled Phenolic Resin Composites
p.1044

Research on the Counterweight in the Process of Diamond Wire Saw Cutting Polysilicon
p.1048

Study on the Dielectric Properties of CaCu₃Ti₄O₁₂ Ceramics by the Brickwork Layer Model
p.1056

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 418-420Deformation and Heat Transfer Analysis for High...

Deformation and Heat Transfer Analysis for High Speed Dieless Drawing of AZ31 Magnesium Alloy Tubes

Abstract:

The effect of drawing speed and heating length on deformation behavior was investigated by numerical approach for AZ31 magnesium alloy tubes to realize high speed dieless drawing process. The length of deformation zone expands with increasing the feeding speed. The increase in heating length leads to expanding length of deformation zone. The mean strain rate increases with increasing the feeding speed firstly, and then rate of increase in the strain rate becomes gradual under condition of any length of heating band. Based on these results, a limiting reduction in area of 52.5% under higher speed and larger heating length conditions can be realized experimentally.