Research on the Feasibility of Shape-Stabilized Phase-Change Materials at Lower Temperature Used in the Phase Change Wall

Quan Ying Yan; Ran Huo; Li Li Jin

doi:10.4028/www.scientific.net/AMR.446-449.1559

Paper Titles

Research on Analysis and Design Method of the Pile-Raft Foundation with Post-Cast Concrete Strip
p.1541

Application of Cusp Catastrophe Model to Predicting of Water Inrush from Mine Floor
p.1546

Frequency Response Characteristic of a Flexible FBG Sensing Beam for Measuring Dynamic Lateral Displacement of Soil in Shaking Table Tests
p.1551

Study on Safety Factor of Loess Cave Dwellings with Pitted Courtyard in Different Rainfall Infiltration
p.1555

Research on the Feasibility of Shape-Stabilized Phase-Change Materials at Lower Temperature Used in the Phase Change Wall
p.1559

Comparison of Dynamic and Static Triaxial Test on the Soil-Rock Mediums
p.1563

Strength Reduction Technique for Non-Linear Failure Criterion
p.1568

Study on Stress-Strain Behavior of Cohesive Soil Mixing with Gravel by Triaxial Test
p.1573

Study on the Disturbed Zone of High Red Bed Accumulation Slope by Numerical Simulation
p.1577

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 446-449Research on the Feasibility of Shape-Stabilized...

Research on the Feasibility of Shape-Stabilized Phase-Change Materials at Lower Temperature Used in the Phase Change Wall

Abstract:

The shape-stabilized phase-change paraffin at lower temperature is an ideal material used in the phase-change wall. It can enhance the thermal storage capacity of the wall and save energy. The thermal properties of shape-stabilized phase-change paraffin were studied experimentally in this paper. The phase change temperature, latent heat and the stability of shape-stabilized phase-change paraffin with different component were analyzed. The critical mass fraction of paraffin required in the materials was discussed. The results may provide the basis for the application in the practical engineering in the future.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 446-449)

Pages:

1559-1562

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.446-449.1559

Citation:

Cite this paper

Online since:

January 2012

Authors:

Quan Ying Yan, Ran Huo, Li Li Jin

Keywords:

Energy Saving, High Density Polyethylene, Paraffin, Phase-Change Wall, Shape-Stabilized Phase-Change Material

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

References

[1] Ival O Anil, K Sircar. Development of phase change technology for heating and cooling of residential buildings and other applications. Proceedings of the 28th intersociety energy conversion engineering conference. Atlanta: American Chemical Society, 1993, 2:134-140

DOI: 10.1109/iecec.1990.716495

Google Scholar

[2] S Hokoi, T Kuroki. Use of phase change material to control indoor thermal enviroment. Proc of 7th Inter Conf on Thermal Energy Storage, June, 1997,Sapporo,Japan:337-342.

Google Scholar

[3] T Miura, K Suzuki. Computer analysis of the cooling load in an office building through applied thermal storage by air supply through the ceiling plenum. Proc of 7th Inter Conf on Thermal Energy Storage, June, 1997, Sapporo, Japan:181-186.

Google Scholar

[4] Inaba H, Tu P.Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material. Heat and Mass Transfer, 1997,32(4):307-312

DOI: 10.1007/s002310050126

Google Scholar

[5] Xavier Py, Pegis Olives, Sylvain Mauran. Paraffin/Porous-graphite- matrix composite as a high and constant power thermal storage material. Heat and Mass Transfer, 2001,44(14):2727~2737.

DOI: 10.1016/s0017-9310(00)00309-4

Google Scholar

[6] Ye Hong, Ge Xinshi. Preparation of polyethylene-paraffin compound as a form-stable solid-liquid phase change material. Solar Energy Materials and Solar Cells, 2000,64(1):37~44.

DOI: 10.1016/s0927-0248(00)00041-6

Google Scholar