A Comparative Study on Locating Critical Slip Surface in 2D and 3D Limit Equilibrium Stability Analysis of Slopes

Abstract:

The Various methods of optimization or random search have been developed for locating the critical slip surface of a slope and the related minimum safety factor in the limit equilibrium stability analysis of slope. But all these methods are based on a two-dimensional (2D) method and no one had been adapted for a search of the three-dimensional (3D) critical slip surface. In this paper, a new Monte Carlo random simulating method has been proposed to identify the 3D critical slip surface, in which assuming the initial slip to be the lower part of an ellipsoid, the 3D critical slip surface in the 3D slope stability analysis is located by minimizing the 3D safety factor of limit equilibrium approach. Based on the column-based three-dimensional limit equilibrium slope stability analysis models, new Geographic Information Systems (GIS) grid-based 3D deterministic limit equilibrium models are developed to calculate the 3D safety factors. Several practical examples, of obtained minimum safety factor and its critical slip surface by a 2D optimization or random technique, are extended to 3D slope problems to locate the 3D critical slip surface and to compare with the 2D results. The results shows that, comparing with the 2D results, the resulting 3D critical slip surface has no apparent difference only from a cross section, but the associated 3D safety factor is definitely higher.

• Periodical: Advanced Materials Research (Volumes 446-449)
• Pages: 1905-1913
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.446-449.1905
• Online since: January 2012
• Authors: Mo Wen Xie, Zeng Fu Wang, Xiang Yu Liu, Ning Jia
• Keywords: Critical Slip Surface, Geographic Information System (GIS), Limit Equilibrium, Monte-Carlo Simulation, Three-Dimensional Slope Stability

References

[1] Arai, K., and Tagyo, K. 1985. Determination of non-circular slip surface giving the minimum factor of safety in slope stability analysis. Soils and Foundations, 25(1): 43–51.

DOI: 10.3208/sandf1972.25.43

[2] Baker, R. 1980. Determination of the critical slip surface in slope stability computations. International Journal Numerical and Analytical Methods in Geomechanics, 4: 333–359.

DOI: 10.1002/nag.1610040405

[3] Nguyen, V.U. 1985. Determination of critical slope failure surfaces. Journal of the Geotechnical Engineering, ASCE, 111(2): 238–250.

[4] Chen, Z.-Y., and Shao, C.-M. 1988. Evaluation of minimum factor of safety in slope stability analysis. Canadian Geotechnical Journal, 25: 735–748.

DOI: 10.1139/t88-084

[5] Li, K.S., and White, W. 1987. Rapid evaluation of the critical slip surface in slope stability problems. International Journal Numerical and Analytical Methods in Geomechanics, 11: 449–473.

DOI: 10.1002/nag.1610110503

[6] Chen, Z.-Y. (1992). Random trials used in determining global minimum factors of safety of slopes. Canadian Geotechnical Journal, 29: 225–233.

DOI: 10.1139/t92-026

[7] Greco, V.R. 1996. Efficient Monte Carlo technique for locating critical slip surface. Journal of the Geotechnical Engineering, ASCE, 122(7): 517–525.

DOI: 10.1061/(asce)0733-9410(1996)122:7(517)

[8] Husein Malkawi, A.I., Waleed, F.H., and Sarada, K.S. 2001. Global search method for locating general slip surface using Monte Carlo techniques. Journal of geotechnical and geoenvironmental engineering, ASCE, 8: 688-698.

DOI: 10.1061/(asce)1090-0241(2002)128:12(1050)

[9] Janbu, N. 1973. Slope stability computers. In: Hirschfeld, R.C., and Poulos, S.J. (eds), The embankment dam engineering, John Wiley & Sons, New York, pp.47-86.

[10] Zhu, D.Y. 2001. A method for locating critical slip surfaces in slope stability analysis. Canadian Geotechnical Journal, 38: 328-337.

DOI: 10.1139/t00-118

[11] Chen, R., and Chameau, J.L. 1983. Three-dimensional limit equilibrium analysis of slopes. Geotechnique, 33: 31-40.

DOI: 10.1680/geot.1983.33.1.31

[12] Chen, Z.Y., Wang, X.G., Heberfield, C., Yin, J.H., and Wang, Y.J. 2001. A three-dimensional slope stability analysis method using the upper bound theorem. International Journal of Rock Mechanics & Mining Sciences, 38: 369-397.

DOI: 10.1016/s1365-1609(01)00012-0

[13] Gens, A., Hutchison, J.N., and Cavounidis, S. 1988. Three dimensional analysis of slices in cohesive soils. Geotechnique, 38: 1-23.

[14] Lam, L., and Fredlund, D.G. 1993. A general limit equilibrium model for three-dimensional slope stability analysis. Canadian Geotechnical Journal, 30: 905-919.

DOI: 10.1139/t93-089

[15] Hovland, H.J. 1977. Three-dimensional slope stability analysis method. Journal of the Geotechnical Engineering, Division Proceedings of the American Society of Civil Engineers 103(GT9): 971-986.

DOI: 10.1061/ajgeb6.0000493

[16] Hungr, O. 1987. An extension of Bishop's simplified method of slope stability analysis to three dimensions. Geotechnique, 37(1): 113-117.

DOI: 10.1680/geot.1987.37.1.113

[17] Hungr, O. 1994. A general limit equilibrium model for three-dimensional slope stability analysis: discussion. Canadian Geotechnical Journal, 31: 791-795.

DOI: 10.1139/t94-093

[18] Leshchisky, D., and Huang, C.C. 1992. Generalized three dimensional slope stability analysis. Journal of Geotechnical Engineering, 118(11): 1748-1763.

[19] Hungr, O., Salgado, F.M., and Byrne, P.M. 1989. Evaluation of a three-dimensional method of slope stability analysis. Canadian Geothchnical Journal, 26: 679-686

DOI: 10.1139/t89-079

[20] Xie M, Esaki T, Zhou G, Mitani Y. GIS-based 3D critical slope stability analysis and landslide hazard assessment. ASCE, Journal of Geotechnical and Geoenvironmental Engineering 2003,129(12): 1109-1118.

DOI: 10.1061/(asce)1090-0241(2003)129:12(1109)

[21] Fredlund, D. G. and Krahn, J.: 1977, Comparison of slope stability methods of analysis, Can. Geotech. J. 14: 429-439.

DOI: 10.1139/t77-045

[22] Bishop A W. the use of the slip circle in the stability analysis of slopes, Geotechnique 1955,5(1): 7-17.

[23] Spencer, E.: 1967, A method of analysis of the stability of embankments assuming parallel inter-slice force, Geotechnique 17: 11-26.

DOI: 10.1680/geot.1967.17.1.11

[24] Morgenstern, N. R. and Price, V. E.: 1965, The analysis of the stability of general slip surfaces, Geotechnique 15: 70-93.

[25] Janbu, N.;Bjerrum, L. and Kjaernsli，B. 1956. Stabilitetsberegning for fyllinger skjaeringer og naturlige skraninger. Norwegian Geotechnical Publication No. 16,Oslo, Norway.

[26] Yamagami, T., and Ueta, Y. 1988. Search for noncircular slip surfaces by the Morgenstern-Price method. Proceedings of 6th International Conference Numerical Methods in Geomechanics, p.1219–1223.

[27] Sridevi, B., and Deep, K. 1991. Application of global optimization technique to slope stability analysis. Proceedings of 6th International Symposium on Landslides, p.573–578.