Research on Geometric Error Compensating Technique of CNC P3G Grinding Machine

Abstract:

Kinematic accuracy is a key reason which influence workpiece's geometric error precision on traditional working process of precisely CNC（Computerized Numerical Control）P3G（polygon profile with 3 lobes） grinding machine. A systematic geometric error model has been presented for CNC P3G grinding machine， proposed multi-body system theory integrate with the structure of CNC P3G grinding machine tools, researched on the machine's space geometric errors. By means of separate geometric errors from the machine tools, build geometric mathematical error model. Then, identify 21 error parameters through method of 9 lines, analysis and calculate the total space geometric errors of the workpiece and wheel. Finally, formed a parameter-list and applied software error compensational technique ， achieved real-time control to the motions of workpiece and wheel. Experimental results shown that the geometrical error modeling technique is accurate and efficient, and the precision of CNC P3G grinding machine is highly raised 70%.

• Periodical: Advanced Materials Research (Volume 462)
• Pages: 287-294
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.462.287
• Online since: February 2012
• Authors: Yi Jian, Qian Qian Li, Hong Cheng, Bin Wu Lai, Jian Fei Zhang
• Keywords: CNC P3G Grinding Machine, Compensation, Geometric Error, Multi-Body System

References

[1] S. Ratchev, S. Liu,W. Huang and A.A. Becker. An advanced FEA based force induced error compensation strategy in milling[J]. International Journal of Machine Tools and Manufacture. Vol 46, April 2006, pp.542-551.

DOI: 10.1016/j.ijmachtools.2005.06.003

[2] A.C. Okafor and Yalcin M. Ertekin. Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics[J] International Journal of Machine Tools and Manufacture . Vol 40, August. 2000, p.1199.

DOI: 10.1016/s0890-6955(99)00105-4

[3] Jingxia Yuan, and Jun Ni. The real-time error compensation technique for CNC machining systems[J]. Methatronics. Vol 4, April. 1998, pp.359-380.

DOI: 10.1016/s0957-4158(97)00062-7

[4] R. Ramesh, M.A. Mannan and A.N. Poo, Error Compensation in Machine Tools—a review. Part I: Geometric Cutting-force Induced And Fixture- dependent Errors, International[J] Journal of Machine Tools and Manufacture. Vol 40, July. 2000, pp.1235-1256.

DOI: 10.1016/s0890-6955(00)00009-2

[5] Shiping Jia. Identification Method for Errors of Machining Center Based on Volumetric Error Model[J]. Chinese Journal of Mechanical Engineering, Vol 38, July 2002, pp.121-125.

DOI: 10.3901/jme.2002.07.121

[6] Youwu Liu, Qing Zhang, Xiaosong Zhao, Zhifei Zhang. Research on Total ErrorModel and Error Compensation of CNC Machine Tools[J]. Manufacturing Technology & Machine Tool. July. 2003, pp.46-50.

[7] Chana Raksiri and Manukid Parnichkun. Geometric and force errors compensation in a 3-axis CNC milling machine[J]. International Journal of Machine Tools and Manufacture. Vol 44, October. 2004, pp.1283-1291.

DOI: 10.1016/j.ijmachtools.2004.04.016

[8] R.L. Huston and Youwu Liu. Multibody System Dynamics(upper and lower)[M]. Press of Tianjin University. August. 1987, pp.82-104.

[9] Xiaosong Zhao, Hongqi Guo and Youwu Liu. Error Model of CNC Machine Tools[J]. Journal of Tianjin University. Vol 34, 200,. pp.723-726.

[10] G. Zhang,R. Veale,T. Charlton,B. Borchardt and R. Hocken. Error Compensation of Coordinate Measuring Measures[J]. Annals of the CIRP. Vol 34, 1985, pp.445-448.

DOI: 10.1016/s0007-8506(07)61808-3

[11] Youwu Liu, Libing Liu, Xiaosong Zhao, Qing Zhang and Shuxing Wang. Investigation of Error Compensation Technology for NC Machine Tool[J]. China Mechanical Engineering. Vol 12, 1998, pp.48-51.

[12] Huanling Li and Hongtao Wu. Identification of 3-axis NC Machine Tool's Geometric Error Parameters. Machinery. Vol 46, April. (2008).

[13] Sartori and G.X. Zhang, Geometric error measurement and compensation of machines[J]. Annals of the CIRP. Vol 44, February. 1995, pp.599-609.

DOI: 10.1016/s0007-8506(07)60507-1

[14] Z.Q. Liua and P.K. Venuvinoda, Error Compensation in CNC Turning Solely from Dimensional Measurements of Previously Machined Parts[J] . CIRP Annals - Manufacturing Technology. Vol 48, 1999, pp.429-432.

DOI: 10.1016/s0007-8506(07)63219-3

[15] Shih-Ming Wang, Yuan-Liang Liu and Yuan Kang, An Efficient Error Compensation System for CNC Multi-axis Machines[J]. International Journal of Machine Tools and Manufacture. Vol 42, November. 2002, pp.1235-1245.

DOI: 10.1016/s0890-6955(02)00053-6